Get the best RGB video quality and stereo audio from your SEGA Mega Drive 2 / Genesis 2 with the Arcade Express Pro RGB SCART cable, built with CSYNC, double shielding and an integrated PCB.

What You Get

  • 1 x Arcade Express Pro RGB SCART cable for SEGA Mega Drive 2 / Genesis 2 and compatible systems.
  • 9-pin Mini DIN connector for the console side.
  • EuroSCART connector with integrated printed circuit board.
  • True RGB video signal with CSYNC.
  • Stereo audio through the SCART cable.

Compatibility

  • Compatible with SEGA Mega Drive 2.
  • Compatible with SEGA Genesis 2.
  • Compatible with SEGA Genesis 3.
  • Compatible with SEGA 32X.
  • Compatible with SEGA Nomad.
  • Compatible with SEGA CDX.
  • Compatible with SEGA Multimega.
  • Compatible with PAL, NTSC and SECAM systems.
  • Compatible with SCART-enabled televisions.
  • Compatible with CRT TVs with RGB SCART input.
  • Compatible with SCART to HDMI converters that support RGB.
  • Compatible with SCART to component video converters.
  • Compatible with OSSC, RetroTink 2X SCART, RetroTink 5X, RetroTink 4K and similar RGB-compatible upscalers.
  • Compatible with XRGB-mini Framemeister when used with a EuroSCART to mini adapter.
  • Not compatible with Mega Drive 1.
  • Not compatible with Master System.

Key Features

  • Designed and manufactured by Arcade Express.
  • True RGB video output for a sharp, vivid and clean image.
  • CSYNC composite sync signal for stable synchronization.
  • Correctly attenuated sync line with 470 ohm resistor for 75 ohm operation.
  • Can help reduce the vertical stripe effect, also known as jail bars, on some consoles.
  • Stereo audio.
  • Double-shielded cable to reduce crosstalk and external interference.
  • High-quality AC coupling capacitors on the RGBS lines.
  • Correct signal level with the required internal resistors for standard 700mVpp RGB operation.
  • Fully wired and grounded SCART connector through the integrated PCB.
  • 9-pin Mini DIN connector for Mega Drive 2 / Genesis 2 style video output.
  • No tuning required: plug and play.
  • Ideal for CRT TVs, RGB SCART setups and modern RGB-compatible upscalers.

Technical Specifications

  • Console connector: 9-pin Mini DIN.
  • TV / scaler connector: EuroSCART with integrated printed circuit board.
  • Video signal: RGB.
  • Sync: CSYNC / composite sync.
  • Audio type: stereo.
  • Shielding: double shielding.
  • Region compatibility: PAL / NTSC / SECAM.
  • Cable length: approximately 165cm.
  • Approximate weight: 82g.

Why Choose This Cable?

  • Perfect for users who want the best possible image from original Mega Drive 2 / Genesis 2 hardware.
  • RGB SCART gives a much sharper and cleaner image than standard composite video cables.
  • CSYNC provides a clean sync signal for high-quality retro gaming setups.
  • Built for CRT televisions, OSSC, RetroTink, Framemeister and other RGB-compatible devices.
  • A high-quality alternative to generic SCART cables with poor shielding or incorrect internal wiring.

Please check your console model before ordering. This cable is for SEGA Mega Drive 2 / Genesis 2 style 9-pin Mini DIN consoles only.

This cable is not compatible with Mega Drive 1 or Master System.

SHIPPING & HANDLING

Orders are normally shipped within 48 hours after payment, working days.

Tracking is provided once the item is shipped.

All items are carefully packed.

PAYMENT & TERMS

We accept PayPal and bank transfer.

We only ship to the PayPal registered address.

Returns from outside the European Union must be sent using UPS.

If another courier is used and customs fees are applied, these costs will be deducted from the refund.