Precision Professional Auto Performance Engine Parts
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Coilovers Lowering Suspension for Dodge Caliber Jeep Compass Patriot MK 07-10
.jpg)
| Toll IPEC Mine Zone Black List (The Parcel Cannot Reach) | ||||||||
| 6443 | 6215 | 6427 | 6230 | 6440 | 6225 | 6436 | 6646 | 6646 |
| 6233 | 6640 | 6612 | 6507 | 6642 | 6390 | 6435 | 6621 | 6415 |
| 6431 | 6438 | 6718 | 6999 | 6437 | 6426 | 6753 | 6639 | 6346 |
| 6537 | 6722 | 6754 | 6638 | 6714 | 6430 | 6751 | 6762 | 6555 |
| 6705 | 6330 | 6721 | ||||||
Introduction
MXR-B3 is based on MXR-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions.
Applications
For Dodge for Caliber (excluding SRT-4 )2007-2012
For Jeep Compass (MK) FWD 2008-2017
For Jeep Compass (MK) 4WD (without Off Road Package) 2008-2017
For Jeep Patriot (MK) FWD 2008-2010
Specification
Height adjustable: Yes, lowering 25-75mm depending on the vehicle models
Damping adjustable: Available, 24 levels of rebound damping force
Front top mount structure: Pillow ball with camber plate
Rear top mount structure: Standard rubber
Camber adjustable: Available
Spring rate Front: 10 kg/mm (556 lbs/in)
Spring rate Rear: 8 kg/mm (448 lbs/in)
Front spring inner diameter: 62 mm
Rear spring inner diameter: 62 mm
Spring length Front: 180 mm
Spring length Rear: 180 mm
Spring Preload advised: 7-10 mm
Shock Type:Twin Tube
Package included
2x Front coil-overs
2x Rear coil-overs
2x C spanners
1x Allen wrench
Dimension
Package size : 62*50*20 cm
Weight: 22250 g
Feature
1. Lowered height adjustment from 25-75mm (depends on vehicle models) which allows a lower center of gravity and also adds a more aggressive stance
2.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coil-overs system. For nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.
3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent
4. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response. ( for some models)
5. CNC machined Aluminum top mounts and lockers-- - excellent strength, and save weight
6. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable
7. High tensile spring--- 600,000 times continuously test to assure its high tensile strength.
8. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.
9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
10. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts
Note
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-5 months will keep it smooth and clean, which helps to extend the lifetime.
We aim to provide you a happy online shopping experience. Your positive feedback and 5 star on Detail Seller Rating (DSR) will encourage us to work harder and do better job in the future. For any reasons , if you are not happy with our products or service, please contact us, we will try our best to find an amicable solution and solve the problem for you.