Lister D Mini Kit v2 with domestic water pump & accessories.

This is 3d printed "kit" to be constructed, not a finished product & some post processing may be required.

Included as follows:
* all 3d printed components
* 9v battery box with switch
* dc motor
* screws
* rubber bands & pulleys

To complete the project, ideally you'd need:
* model glue/super glue
* a base of some form to mount the model
* Phillips screwdriver
* an inline resistor to limit the speed

Optionally:
* drill bits for the motor mount
* soldering iron
* 500+ grit sandpaper
* humbrol #3 enamel paint & brush
* dc motor speed controller (ebay £3)

Approximately 1:4.9 scale, (14cm high)

Upon completion, the model is fully functional and visually identical to the pictures above however the design/function may be revised in the future, parts are unpainted & due to high tolerances, some sanding may be required.

A basic build guide is available digitally on ebay via "supporting documents" (attached to this listing).
If you'd prefer a paper copy, send me a message when purchasion & I'll happily provide one.

Main components are pla based while the moving parts, sleeves/shells are made from the far tougher petg filament.

While not designed to resist lateral force, if a part fails prematurely, please contact me & within reason, I'll replace it at my cost.

Happy making!

Lineshaft add on https://ebay.us/m/vcoj3U
Saw Bench https://ebay.us/m/UOzCJN