BETAFPV Aguila20 Brushless Quadcopter (HD Video)

Aquila20 Brushless Whoop Quadcopter is a 2S brushless whoop available in P1 Air Unit HD VTX or Analog VTX versions. It supports beginner-friendly assisted flight modes and full manual control. Specifications: Versions: Aquila20 P1, Aquila20 Analog VTX VTX (Aquila20 P1): P1 Air Unit HD VTX VTX (Aquila20 Analog VTX): analog VTX VTX Power & Range (Aquila20 P1): 200mW and range above 400m VTX Power & Range (Aquila20 Analog VTX): 350mW and range above 200m Camera (Aquila20 P1): P1 VTX camera (1/2.9" CMOS) Camera (Aquila20 Analog VTX): C04 (1/3" CMOS) Wheelbase: 100mm Flight Controller: Aquila20 V1.0 Frame: Aquila20 Brushless Whoop Frame Motors: 1103|10500KV motors Propellers: Gemfan 2218 3-Blade Propellers (1.5mm Shaft) Battery: Aquila20 Exclusive Battery 2S HV 1100mAh Battery quantity: 2PCS Discharge Rate: 15C Discharge Power: 8.74Wh Rated Voltage: 7.6V Battery Weight: 54.5±1.0g Charger: 2S HV Battery Charger and Voltage Tester with BT3.0 Connector Remote Controller Protocol: ExpressLRS 2.4G V3 Camera Tilt: 10°-30° Flight Modes: N/S/M Mode Flight Time: About 10 mins Takeoff Weight (Aquila20 P1): 127±1.0g Takeoff Weight (Aquila20 Analog VTX): 122±1.0g Compatible goggles: VR04 HD, VR04 Compatible radio transmitter: LiteRadio 4 Firmware compatibility note: BETAFPV devices should be updated to firmware version V2.0.5 or later for third-party ArtLynk protocol equipments compatibility Firmware update note: The air unit needs to be updated via the ground station Firmware version note: firmware V2.0.5 is not compatible with any V1 versions (V1.0.36 / V1.0.44) Package Contents: 1x Aquila20 Brushless Whoop Quadcopter (Analog/P1 Air Unit Version) 1x Aquila20 Exclusive Battery 2S HV 1100mAh 1x 2S HV Battery Charger and Voltage Tester with BT3.0 Connector 4x Gemfan 2218 3-Blade Propellers 1x Prop Removal Tool 1x Cross Screwdriver 1x 4Pin Adapter Cable 1x USB Type-C Adapter Board

BETAFPV Aguila20 Brushless Quadcopter (HD Video)

Aquila20 Brushless Whoop Quadcopter is a 2S brushless whoop available in P1 Air Unit HD VTX or Analog VTX versions. It supports beginner-friendly assisted flight modes and full manual control.

Specifications:

  • Versions: Aquila20 P1, Aquila20 Analog VTX
  • VTX (Aquila20 P1): P1 Air Unit HD VTX
  • VTX (Aquila20 Analog VTX): analog VTX
  • VTX Power & Range (Aquila20 P1): 200mW and range above 400m
  • VTX Power & Range (Aquila20 Analog VTX): 350mW and range above 200m
  • Camera (Aquila20 P1): P1 VTX camera (1/2.9" CMOS)
  • Camera (Aquila20 Analog VTX): C04 (1/3" CMOS)
  • Wheelbase: 100mm
  • Flight Controller: Aquila20 V1.0
  • Frame: Aquila20 Brushless Whoop Frame
  • Motors: 1103|10500KV motors
  • Propellers: Gemfan 2218 3-Blade Propellers (1.5mm Shaft)
  • Battery: Aquila20 Exclusive Battery 2S HV 1100mAh
  • Battery quantity: 2PCS
  • Discharge Rate: 15C
  • Discharge Power: 8.74Wh
  • Rated Voltage: 7.6V
  • Battery Weight: 54.5±1.0g
  • Charger: 2S HV Battery Charger and Voltage Tester with BT3.0 Connector
  • Remote Controller Protocol: ExpressLRS 2.4G V3
  • Camera Tilt: 10°-30°
  • Flight Modes: N/S/M Mode
  • Flight Time: About 10 mins
  • Takeoff Weight (Aquila20 P1): 127±1.0g
  • Takeoff Weight (Aquila20 Analog VTX): 122±1.0g
  • Compatible goggles: VR04 HD, VR04
  • Compatible radio transmitter: LiteRadio 4
  • Firmware compatibility note: BETAFPV devices should be updated to firmware version V2.0.5 or later for third-party ArtLynk protocol equipments compatibility
  • Firmware update note: The air unit needs to be updated via the ground station
  • Firmware version note: firmware V2.0.5 is not compatible with any V1 versions (V1.0.36 / V1.0.44)


Package Contents:

  • 1x Aquila20 Brushless Whoop Quadcopter (Analog/P1 Air Unit Version)
  • 1x Aquila20 Exclusive Battery 2S HV 1100mAh
  • 1x 2S HV Battery Charger and Voltage Tester with BT3.0 Connector
  • 4x Gemfan 2218 3-Blade Propellers
  • 1x Prop Removal Tool
  • 1x Cross Screwdriver
  • 1x 4Pin Adapter Cable
  • 1x USB Type-C Adapter Board
×
×
×
×
×

Buy now and save!
Tell a friend Visit store Watch now

Postage info

Click the Postage tab above the listing description for more info

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYING VIA PAYPAL


We accept PayPal on our all our items so you can shop with confidence.

Simple choose the PayPal option when proceeding through the checkout.

Additional Information

No additional information at this time

Ask seller a question

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© SpeedyFPV

Click the Postage tab above the listing description for more info

Accepted Payment Methods

  • PayPal

Returns are accepted

Items must be returned within 30 days of the auction ending

Seller will pay for return shipping.