Features
The latest BiSecur handheld transmitter for automatic door opening, this system not only makes the transmitter safer, but also means a more reliable signal, providing a longer working distance.
Compatible Models This garage remote control is NOT original, it is only compatible with 868MHz Hormann / Garador -
HORMANN HS1-868-BSHORMANN HS4-868-BS
HORMANN HS5-868-BS
HORMANN HSE1-868-BS
HORMANN HSE2-868-BS
HORMANN HSE4-868-BS
HORMANN HSP4-868-BS
HORMANN HSD2-868-BS
HORMANN HSS4-868-BS
Specifications
2. Type : Face to Face Clone
3. Frequency : 868MHz
4. Code: Rolling Code
5. Battery : CR2032（Include Battery)
6. Buttons : 4
How to programme
Programming Methods of Rolling Code (Blue LED):
NOTE: Factory Default Rolling Code !!!
Copy the Code from Original Remote.
1. Pressing and hold the button of the NEW remote control that you want to store the code from the original remote, keep it pressed, pressing one of any other button 3 times, until the LED lights up red, then release all buttons.
2. Placing the Original remote on the left or right of the NEW remote, as close as possible.
3. Pressing and hold the button of the Original remote control for about 13s, until the indicator light flashes red and blue alternately.
The learning procedure will be finished when the NEW remote LED flashes quickly in blue, release all buttons.
4. You new remote control is programmed.
5. Please do the same procedure for the rest of buttons.
NOTE: You have 15 seconds to transmit the code. The process must be repeated if the radio code is not successfully transmitted within this time.
Programming with the Receiver:
If the original remote control is lost, the new remote can be programmed with the receiver directly.
1. Find the "Learning" or "Program" button on the receiver, press it and you'll see the indicator light start flashing.
2. While the indicator light is flashing, press the button on the NEW remote control until the receiver indicator light flashes quickly, which indicates that the NEW remote control has been programmed successfully.
(Keep the remote control as close to the receiver as possible when programming)
If your old remote has a RED LIGHT when the button is pressed, you will have to follow the next steps for programming the new remote!
You are now going to change the colour of the light on the new remote from BLUE to RED.
Delete All Code:
Each button of remote control is assigned to a new radio code by means of the following steps.1. Open the battery lid and remove the battery for 10 seconds.
2. Press one button of remote control and keep it pressed.
3. Insert the battery.
– The LED slowly flashes in blue for 4 seconds,
– The LED flashes rapidly in blue for 2 seconds,
– The LED is illuminated blue for a long time.
4. Releasethe button of remote control, all radio codes are newly assigned.
NOTE1: If the button of remote control is released prematurely, no new radio codes are assigned.
If you need any help at all, or advice, you can call me directly. 


We have repaired over 10'000 garage doors and with over 20 years experience we know 'garage doors' 


We are only a phone-call away.
GDS UK Garage Door Spares LTD
