Modern marine vessels, UTVs, and motorcycles present a hostile operational environment that quickly destroys standard car audio equipment. The T
Achieving high-power output in powersports applications is typically limited by compact batteries and low-current charging systems. To break through this limitation, the T
Improperly tuned gain controls are the number one cause of speaker failure and distorted sound, but setting them precisely usually requires expensive oscilloscopes. The T
Packing a true 400-watt RMS powerhouse into a chassis smaller than a hardcover book creates a massive thermal challenge, especially when crammed inside dense motorcycle fairings. Rockford Fosgate counters this with an advanced 3-stage forced induction cooling network. Driven by dual internal micro-fans, the system actively pulls fresh, cool air across the internal MOSFET transistors and pushes hot air out through dedicated exhaust ports. The top and bottom aluminum heatsinks are structurally decoupled, which isolates extreme internal heat and allows the external casing to remain remarkably cool to the touch during grueling, all-day rides.
General Features:
4-Channel Power Marine Amplifier: High-efficiency Class-AD design delivers clean, full-range audio with minimal battery draw.
Element Ready™ Engineering: Complete protection against moisture, dust, and UV damage for powersports and marine use.
Constant Power Delivery: Automatically balances voltage and current to provide identical output at 2-Ohm and 4-Ohm loads.
C.L.E.A.N. Setup Wizard: Patented input/output clip indicator LEDs for exact source-to-amplifier level matching.
Differential Input Circuitry: Actively rejects electrical noise picked up along input cables to stop alternator whine.
Installation & Control:
Ultra-Compact Footprint: Micro-chassis dimensions make it an ideal drop-in option for motorcycle fairings and tight glove boxes.
2-Channel / 4-Channel Input Switch: Allows you to drive all four channels from a single stereo RCA input pair.
Top-Mounted Adjustment Panel: Gain controls, crossovers, and Punch EQ are easily accessible under a protective seal.
High-Level Auto Turn-On: Detects signal on factory speaker inputs to switch the amp on without a remote wire run.
Technical Specifications:
Continuous Power Output (RMS): 100 Watts x 4 @ 4-Ohm | 100 Watts x 4 @ 2-Ohm | 200 Watts x 2 @ 4-Ohm Bridged.
Dynamic Power Output: 128 Watts x 4 @ 4-Ohm | 152 Watts x 4 @ 2-Ohm | 290 Watts x 2 @ 4-Ohm Bridged.
Frequency Response: 20Hz to 20kHz (+/- 1.0dB).
Total Harmonic Distortion (THD+Noise): <1.0% at rated 4-Ohm and 2-Ohm outputs.
Input Sensitivity Range: Variable from 150mV to 12V (handles both RCA low-level and speaker high-level signals).
Crossover Range & Slope: 12dB/octave Butterworth, variable from 50Hz to 250Hz (Selectable HP / LP / AP).
Tone Controls: Punch EQ adjustable Bass (0 to +18dB @ 45Hz) and Treble (0 to +14dB @ 12.5kHz).
Operating Voltage & Fuse Rating: 9 - 16 VDC with a recommended 60A external inline fuse (55A Max current draw).
Physical Dimensions: 1.6" H x 4.3" W x 8.3" D (4.1cm x 10.8cm x 21.1cm) | Weight: 3.4 lbs (1.54 kg).
(1) Rockford Fosgate Power Marine TM400X4ad 4-Channel Amplifier
(2) 4-Pin Speaker Output Wiring Harness Plugs
(2) 4-Pin RCA Input Wiring Harness Plugs
(1) Detachable 8 AWG Power and Ground Connector Block
(4) Stainless Steel Mounting Screws
(1) Individualized Punch Verification Performance Certificate
(1) Installation and Operation Manual