6.35mm 1/4 TRS to Right Angle Male XLR Neutrik Van Damme Cable Neutrik Connectors

10 Colours of Cable to choose from...

Van Damme Tour Grade Classic XKE cable UPOFC

The unique combination of ultra pure oxygen free copper silver plated and bare copper strands within each of the four conductors has given a remarkable signature to this stunning cable defined by a full bodied natural, transparent, detailed and balanced sound rarely found in microphone cables of this price range.

Neutrik NP3X NC3MRX

Great for active speakers or patching equipment

Made by us in our workshop using our advanced solder equipment with 4 percent silver solder. Silver solder makes for a better solder joint, it is harder than standard lead free solder and gives a shiny bright finish.

Neutrik connectors are industry standard and are extremely robust, tried and trust by professional audio hire companies the world over. This lead uses nickel connectors. Both connectors have a chuck type cord grip, so the cable is going to stay in place. These cables look extremely professional and are a given choice for many studios and broadcast companies the world over.

Professionally made by us with over 30 plus years experience.

 This cable can be used on any balanced audio equipment that has TRS outputs and XLR inputs. 

Please note that these leads are custom made to your colour and length requirements. More leads in our shop.

Choose your cable colour from the drop-down menu - what you see in the picture is what you will receive

 Black Brown Red Orange Yellow Green Blue Purple Grey White

 Choose your length of cable from the drop-down menu

0.1 m, 0.25 m, 0.35 m, 0.5 m, 0.75 m, 1 m, 1.25 m, 1.5 m, 1.75 m, 2 m, 3 m, 4 m, 5 m, 6 m, 7 m, 8 m, 9 m, 10 m, 12 m, 15 m, 17 m, 20 m, 25 m, 30 m 40 m - any other sizes let us know and we will make them

Made with Neutrik Right Angle 3 pole Male XLR NC3MRX and NP3X connectors, with nickel contacts, diecast outer body. 

This listing is for one lead. 

Cable Length - Important

PLEASE MEASURE UP CAREFULLY TO AVOID ERRORS

Leads 1m or less (patch leads) will be measured visible cable from the rear black boot of the connector. We add 100mm of cable FREE to compensate for the connectors.

Leads over 1m will be measured cut length of cable. The connectors use up 100mm of cable.

 If you need any specific length or need a little extra please ask - it can be made to that length as these are made to measure when we receive the order. Contact through ebay messages.

We can make the lead to an exact length if you want - Order the lead that is slightly longer and message us through ebay.

 If you want a longer lead let us know.

Applications examples:

  • Mixer Line Output on TRS 1/4" 6.35m Jack to active speakers using XLR inputs
  • Balanced TRS output to XLR balanced input
  • Compressor, Limiter, EQ, Audio Processor on TRS Jack outputs to XLR inputs on an amplifier, mixing desk.
Can be used for any mic/line level use
Mixer output to active speaker input (note an active speaker is a speaker with an amplifier built into it)

Please note that all inputs and output must be balanced

Features for Van Damme Tour Grade XKE

Applications:

Microphone level signal

Application Notes:

Features 
Combination of silver plated and plain ultra pure oxygen free copper conductors for unsurpassed sound quality
Further improved outer jacket ensures cable remains flexible in sub zero temperatures
Low capacitance core to core 56 pF/m nominal
Tightly packed cotton fillers ensure no static build up and even capacitance
Close lapped copper screen for the best compromise between effective shielding and flexibility
•Inner pair is twisted for great noise reduction and flexibility 
Neutrik chuck type strain relief provides higher pull-out force than any other connectors