Telefunken HR800 Receiver / Phono Amplifier/Serviced 1 Year Warranty [1]

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.



Professionally checked and maintained in our specialist workshop

12 months guarantee*

Optical condition: Very good (Product images are sample pictures) **


Scope of delivery:

  • Telefunken HR800 Stereo Receiver

Equipment / technical data:

  • Sound control: depths, heights

  • Headphone output

  • Loudness function

  • RMS performance: 2 x 30 W (8 Ohm)

  • Frequency response: 15 Hz - 30 kHz

  • Signal frame distance: 88 dB (line)

  • Total ram factor: 0.1 %

  • Damping factor: 25

  • and much more.

Connections:

Inputs:

  • 1 x analog cinch phono

  • 1 x analog cinch

  • 1 x coaxial connection for FM/MW/LW antenna

  • 1 x connection for MW/LW antenna

  • 1 x DIN socket for tape deck

Outputs:

  • 1 x 6.3mm jack

  • 1 x analog cinch

  • Loudspeaker connections for 2 loudspeaker couples

Mass:

Width x height x depth: 440 x 110 x 385 [mm]



Information on maintenance

Magnetic tape storage devices (audio cassettes, VHS, HI8, Minidv, etc.)

We maintain the thorough cleaning and assessment of all band -leading parts including Tonkopf/head drum and the replacement of wear parts. Particular attention is paid to the pressure roll, straps and certain plastic parts. The mechanics and the sintering camp are checked for smoothness and waited accordingly. The track is checked and a comparison with high -quality test cassettes is carried out. Depending on the device model, we observe further aspects so that we are able to offer you a long -lasting device.

Devices for optical storage media (DVD, CD, BD, LD, Minidisc, etc.)

The removal of dust, cleaning of the laser unit, greasing the mechanics, checking the "RF Eye pattern" up to the renewal of the laser unit/laser mechanics are activities that are carried out as part of the maintenance. For devices for optical storage media, the laser unit is of course treated with the greatest care. Laser units with Trüber/Matt lens are sorted out.

electronics

The electronics of the electrical devices are carefully examined. Through many years of experience we can Fix type -specific weaknesses before this leads to an error. With certain devices, the lifespan can be increased so enormously.

*Guarantee conditions

The guarantee conditions can be found below on offer, under "Legal provisions"

** Information on the optical condition

The articles are usually offered with sample pictures to make our processes more efficient.
We can pass on this advantage to our customers in pricing.
When allocating the optical state, we make sure that the following criteria apply:

Very good [1]:
In any case, the devices are suitable for living rooms. Occasia, insignificant blemishes on the front and/or on the housing cover may be available. These are hardly noticeable from a maximum of one meter away.

Good [2]:
The devices are presentable . Occasionally small flaws on the front and/or isolated small paint scratches (no longer than approx. 5cm). From approx. These traces are hardly noticeable 2 meters away. Fine superficial signs of wear on the cover are possible.

Acceptable [3]:
Occasionally clearer flaws on the front and/or isolated small paint scratches (no longer than approx. 5cm). Fine superficial signs of wear on the cover are possible.

Clear signs of wear [4]:
The signs of wear are clearly visible. Signs of wear on the front and/or some scratches (also longer than 5cm) can be present on the top.


We maintain the thorough cleaning and assessment of all band -leading parts including Tonkopf/head drum and the replacement of wear parts. Particular attention is paid to the pressure roll, straps and certain plastic parts. The mechanics and the sintering camp are checked for smoothness and waited accordingly. The track is checked and a comparison with high -quality test cassettes is carried out. Depending on the device model, we observe further aspects so that we are able to offer you a long -lasting device. The removal of dust, cleaning of the laser unit, greasing the mechanics, checking the "RF Eye pattern" up to the renewal of the laser unit/laser mechanics are activities that are carried out as part of the maintenance. For devices for optical storage media, the laser unit is of course