This auction is for a Nuforce P-9 Preamplifier, I've owned these amazing amplifiers for 10 years and have used them a few times a week during that period without any significant issues. (Issues I have had mentioned later), For audiophiles who want to integrate a home theater system into an uncompromising audio system this is defiantly an amplifier to review.
Its unusual in that it features a "Dual Drive" design with a separate power supply, two volume controls one fully analog volume control, 5 RCA inputs, which give unprecedented transparent, highly natural sound quality seldom seen in solid state amplifiers.

The few issues I have had with it,
Occasionally if I've had a power cut while the unit is on standby, when the power is restored I will need unplugging and plugging back in again and it works fine.The volume on rare occasions flicks between volumes for example between 10/11. Only when using the fully analog volume.The volume control (which looks more like a lightsaber) seems to be missing a original screw that requires a hex key and replaced with a black screw (shown in photos). This screw is the one to access the battery compartment and still works as I've changed the batteries but I don't think is original (I purchased without original screw)
Key design features :
Hz JFETs Custom-made Alps motorized high-performance volume controlFull microprocessor control with memory retention "Dual-drive" volume control mechanismNo capacitor and no DC-servo in the signal path 3 separate power suppliesHigh-performance HT bypass integration Individual audio channels are shielded with heavy copper shield with thermal barrierSolid stainless steel back connector panel forms a solid signal ground reference
Technical Specifications 

THD+N = 0.0004% @ 1kHz and a power bandwidth of 5MHz. Near perfect reproduction of 125kHz square wave.

Housed in two chassis, the low-noise, high-performance Nuforce P-9 premaplifier is a breakthrough product. One chassis contains three power supplies and microprocessor control logic; the second chassis contains an analog volume control, input selection relays, and sensitive analog circuit components. Externally, the dual P-9 chassis are a stylistically consonant match to the NuForce Ref 9 Series power amplifiers.

Design & Features
The P-9's 'Dual Drive' volume mechanism can be controlled either by a custom-designed, full-function remote interfacing with a digital volume control or by the manual Alps volume pot. A microprocessor control drives the high-performance Alps motorized pot in the analog chassis. A communication protocol constantly senses and feeds back the volume level to the microprocessor to sync-up the level settings on the digital volume indicator and Alps volume pot. Primarily for convenience, the digital volume control acts as an interface to the remote control. The volume control is ultimately analog based. As an additional convenience, memory stores the last-used input selection and volume level.

The heart of the P-9 boasts an all-discrete, precision-operational amplifier module. To reduce capacitive loading on the final voltage amp, the design incorporates ultra-low-noise, monolithic dual JFETs, specially selected VMOS FETs and extremely flat hFE bipolar transistors in a dual cascode configuration with a driven shield. All this is necessary to achieve a 5MHz power bandwidth, a S/N ratio exceeding 100dB, with better than 120 dB of dynamic range. The inherently stable P-9 gain circuit has no capacitors or DC-servos in the signal path.

Much attention has been paid to isolation. The amp modules are seated within heavy copper shields with internal thermal insulation to prevent thermal drift or signal-related heating capable of interfering with the preamp's operation. Each amp module has a self-contained shunt regulator to increase its isolation from the power supplies. A separate, isolated, floating-current source supply feeds each module to insure further isolation from noise in the ground system. The control system sends DC to the relays and the potentiometer's motor only. No logic circuitry with its clocks and fast edges introduces noise into the analog section's sensitive, low-level signals. While providing the custom-designed remote control's exemplary convenience, the preamp's overall isolation results in an extremely low noise floor.

For audiophiles who want to integrate a home theater system into an uncompromising audio system, the P-9 incorporates a unique bypass system that connects the power amps for the main speakers directly to the AV processor or AV receiver amp, thus allowing for a seamless transition from the most demanding audiophile performance to THX multi-channel surround with bass management. Better still, this feature can be activated by a 12V trigger enabling integration without the need for manual intervention. All that's needed is a processor or receiver's 12V trigger receptor.