Pink Bio-Flex Flat Back Labret Piercing

14GA(1.6mm) Gauge - 10mm Bar - 4mm Ball

Upgrade your piercing jewellery with this sleek labret stud - designed for comfort, everyday wear, and a secure low‑profile fit.

Material: BioFlex / Acrylic BioFlex is a biocompatible, flexible plastic ideal for piercing jewellery. It's soft, lightweight and comfortable even in new piercings. Because it's completely non-reactive, it won't interfere with healing or irritate sensitive skin.

As these piercings are completely metal-free, they're suitable for people with metal allergies, hospital visits, MRIs, X-rays, or any situation where metal jewellery cannot be worn.

This stud is fitted with a solid-colour acrylic ball (4mm). The colour runs through the entire ball - not just coated - so it won't scratch, peel or fade.

Bar Gauge: 14GA (1.6mm)
Bar Length: 10mm
End: 4mm Pink colour acrylic ball - semi-transparent - colour runs through the entire ball (not coated)
Fixing: Externally threaded flat-back labret. Ball top unscrews for easy fitting or swapping.

Please note: BioFlex threads feel slightly different from steel. For smooth fitting, gently push the ball onto the bar while twisting so the thread catches securely. If you're new to acrylic jewellery, practising in your hands first can make fitting much easier - especially for harder-to-reach piercings.

* Labret Size Guide - Suggested Uses

(Please check your piercing's anatomy and healing stage before selecting bar length. Sizes are approximate and may vary by placement. When in doubt, consult a professional piercer.)

14GA - Perfect for those who prefer a slightly thicker bar for lip or cartilage piercings, or already wear 14GA jewellery.
The 10mm bar provides extra room (compared to standard 6–8 mm labrets). Suitable for initial swelling, thicker lip tissue, or piercings that naturally sit deeper. A good option for labret, medusa, monroe, cheek, and some cartilage placements where a shorter bar feels tight.
The 4mm size ball is easy to grip and tighten, great for cartilage piercings.

Note: Photo is for reference only and shows the style, colour, and measurements. Exact proportions may vary, as image represents one size from the range.

* Colour Options

More Choices Available: Explore other colour options and sizes in our shop, available as single labrets or as cost-effective 10-colour gift pack, perfect for sharing or gifting. Find them in our eBay shop under: Bio-Flex Labret Bars with Coloured Ball

This listing is for 1 single labret in the design, size, and colour shown in the picture.

* Care & Sterilisation

Our body jewellery is not sold as sterilised unless specifically stated. Always sterilise new jewellery before first use.

For tongue rings and oral jewellery, use alcohol-free mouthwash to avoid discolouration or damage to acrylic items.
For non-oral piercings, warm water and antibacterial soap are sufficient.

Please note: Some disinfecting methods can be harsh and may weaken acrylic balls, causing them to break. This jewellery is not suitable for autoclaving. Avoid hot water or alcohol-based products such as hand sanitiser, antibacterial gel, or similar.

Pink Bio-Flex Flat Back Labret Piercing

14GA(1.6mm) Gauge - 10mm Bar - 4mm Ball

Upgrade your piercing jewellery with this sleek labret stud - designed for comfort, everyday wear, and a secure low‑profile fit.

Material: BioFlex / Acrylic BioFlex is a biocompatible, flexible plastic ideal for piercing jewellery. It’s soft, lightweight and comfortable even in new piercings. Because it’s completely non‑reactive, it won’t interfere with healing or irritate sensitive skin.

As these piercings are completely metal‑free, they’re suitable for people with metal allergies, hospital visits, MRIs, X‑rays, or any situation where metal jewellery cannot be worn.

This stud is fitted with a solid-colour acrylic ball (4 mm). The colour runs through the entire ball - not just coated - so it won’t scratch, peel or fade.

Bar Gauge: 14GA (1.6 mm)
Bar Length: 10mm
End: 4mm Pink colour acrylic ball - semi-transparent - colour runs through the entire ball (not coated)
Fixing: Externally threaded flat‑back labret. Ball top unscrews for easy fitting or swapping.

Please note: BioFlex threads feel slightly different from steel. For smooth fitting, gently push the ball onto the bar while twisting so the thread catches securely. If you’re new to acrylic jewellery, practising in your hands first can make fitting much easier - especially for harder‑to‑reach piercings.

⭐ Labret Size Guide - Suggested Uses

(Please check your piercing’s anatomy and healing stage before selecting bar length. Sizes are approximate and may vary by placement. When in doubt, consult a professional piercer.)

14GA - Perfect for those who prefer a slightly thicker bar for lip or cartilage piercings, or already wear 14GA jewellery.
The 10mm bar provides extra room (compared to standard 6–8 mm labrets). Suitable for initial swelling, thicker lip tissue, or piercings that naturally sit deeper. A good option for labret, medusa, monroe, cheek, and some cartilage placements where a shorter bar feels tight.
The 4mm size ball is easy to grip and tighten, great for cartilage piercings.

Note: Photo is for reference only and shows the style, colour, and measurements. Exact proportions may vary, as image represents one size from the range.

⭐ Colour Options

More Choices Available:
Explore other colour options and sizes in our shop, available as single labrets or as cost‑effective 10‑colour multi‑packs, perfect for sharing or gifting.
Find them in our eBay shop under: Bio-Flex Labret Bars with Coloured Ball

This listing is for 1 single labret in the design, size, and colour shown in the picture.

⭐ Care & Sterilisation

Our body jewellery is not sold as sterilised unless specifically stated. Always sterilise new jewellery before first use.

For tongue rings and oral jewellery, use alcohol‑free mouthwash to avoid discolouration or damage to acrylic items.
For non‑oral piercings, warm water and antibacterial soap are sufficient.

Please note: Some disinfecting methods can be harsh and may weaken acrylic balls, causing them to break. This jewellery is not suitable for autoclaving. Avoid hot water or alcohol‑based products such as hand sanitiser, antibacterial gel, or similar.