eBay

Adafruit 128x64 RGB LED Matrix Module, 2mm Pixel Pitch, 6484

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.

128x64 RGB LED matrix (2mm pitch)

High-resolution 128x64 RGB LED matrix with 8,192 LEDs and 2 mm pixel pitch - ideal for video walls, animations and advertisements.
Attention: Uses a 5 address multiplexing system (ABCDE) - many drivers/boards only support 4 addresses (ABCD). Be sure to check compatibility before purchasing.
Compatible with:
- RGB Matrix Bonnet for Raspberry Pi
- RGB Matrix HAT (with solder jumper)
- Matrix Portal S3 (without jumper)
Scope of delivery:
- 128x64 RGB panel
- IDC ribbon cable
- Power cable
No built-in PWM: The image must be constantly redrawn (manual PWM). For a 12-bit color graphic, approx. 12 Kbytes of RAM required.
Not suitable for Arduino UNO / ATmega32u4 - powerful microcontrollers with lots of RAM are recommended (e.g. SAMD21, SAMD51, ESP32). 8-bit mics are borderline.
Displays can be cascaded as long as computing power and RAM are sufficient.
Power requirement: up to approx. 4A per panel at 5V. A strong, regulated 5V power supply is recommended.
Requires 13 GPIO pins. Direct individual wiring is prone to errors - ready-made adapter/driver boards are recommended (e.g. Matrix Portal ESP32-S3, RGB Matrix Shield/FeatherWing, RGB Matrix Bonnet).
The panels are factory white balanced with uniform brightness.
These are leftovers from industrial production - appearance and exact dimensions may vary slightly from batch to batch, but function and control remain the same.