
PWM DC Motor Speed Controller Introduction PWM DC motor speed controller is specially developed for motor DIY lovers. chooses high quality electronic components to make this controller and devotes to provide best DIY experience for you. High quality electronic components ensure the controller works efficiently and stably. Potentiometer knob help you control the motor speed accurately. CW/CCW switch provides forward and reverse choice for your motor rotation direction. Enjoy your DIY experience. ➤Potentiometer Knob——Just only turn the knob to to control motor speed accurately ➤Input Voltage: DC 10V-55V 1. Before you attempt to wire the controller, make sure your power is off. And also, please turn off the switch on the speed controller.
➤CW/CCW Switch——Only one switch provides forward and reverse direction of rotation choice
➤Instruction Label——The label attached on the case help guide you to connect the wires correctly
➤Aluminium Case——The solid case protects the circuit board well and the 2 holes help you fix it
➤Input Current: 100A Max
➤Rated Current: 60A
➤PWM Frequency: 15KHz
➤Potentiometer: 100KΩ
➤Circle Range: 0%-100%
➤Apply to: Brush Motor
2.the wiring diagram label on the controller, connect the wires between the power supply, controller and motor accurately.
3. Fix the motor in place. Then turn on the power and controller switch. Now adjust the potentiometer knob to control motor speed.
4. If everything goes well, fix the controller in place with screw spike. Enjoy your use experience.
(Attention: Do NOT reverse positive and negative power loads!)

✉ For any inquiries, please reach out via the eBay messaging system. We aim to respond within 24 hours.
🌟 We value your feedback and strive to earn your trust. If you're not satisfied with your purchase, please contact us and we'll work to resolve the issue.
- We offer a 30-day return policy.
- If the item is defective or you are not satisfied, contact us for a replacement or refund.
- All returns must be sent to the address provided upon contacting us.