Cannot be shipped outside Australia or by Express Post

Aerosol sprays are efficient and economical and are ideal for finishing without the expense and inconvenience of a full spray gun and compressor setup.

This Mohawk Nitrocellulose Guitar Finishing Set includes 1 x Sanding Sealer plus 2 x Gloss Lacquer.

Sanding Sealer:

Mohawk Tone Finish Flat Easy Sanding Sealer Aerosol is a high-quality Nitrocellulose Sanding Sealer. It is used to seal raw or stained wood, build up thickness and fill grain. It's high-build and easy-sanding properties make it an effective way to create a smooth surface for lacquer to be applied.

- Highest quality Nitrocellulose sanding sealer
- Suitable for acoustic & electric instruments
- Compatible with all ColorTone & Mohawk Nitrocellulose Products
- Made in U.S.A.
- 13 fl.oz (384ml) Aerosol tin
- 1 Tin is enough for most instruments
- High build and adhesion with easy-sanding
- Very strong fumes - mask with spray painting filters essential

Gloss lacquer:

Mohawk have been producing guitar finishing products for decades and are the preferred choice by many top American guitar manufacturers. 

'Tone Finish' is a traditional single-part Nitrocellulose lacquer which has been formulated to have the optimal properties of protection, durability, flexibility and clarity. It is superior to other lacquers as it has enough flexibility to minimise the danger of finish checking while being brittle enough not to impede the sound of a fine guitar. 

The Gloss Finish needs to be built up then 'cut back' with fine sandpaper and buffed using polishing compound.

Mohawk Tone Finish Lacquer can be used on its own for a natural, clear finish or as a clear coat over a tinted, sunburst or opaque Nitrocellulose colour coat. There is no need for a sanding sealer though grain filler or epoxy filing can be used as a preparation on porous timbers.

Several coats of lacquer should be applied with a light sand and several hours drying time between coats. It is important a thick enough layer is applied to allow cutting back and polishing. The cutting back is done with fine wet and dry sandpaper and polishing compound. It is possible to achieve a mirror finish with proper cutting back.

- Highest quality nitrocellulose lacquer
- Suitable for acoustic & electric instruments
- Made in U.S.A.
- 13 fl.oz (384ml) Aerosol tin
- 3-6 tins required to finish one guitar in Gloss
- Can be used as a clear coat over coloured lacquers
- Very strong fumes - mask with spray painting filters essential