Premium 2-Pack OSRAM XLS L1 / L1CY High-Output 2700K Selective Yellow LED Modules – Extreme Performance Front Bumper Fog Light Upgrade Kit With Installation Tool Included (1 Matched Pair)

Package Quantity: 2 Brand-New, Factory-Sealed OSRAM XLS L1CY LED Modules and 1 Specialized Installation Key Tool (Shipped inside 1 Complete Retail Box)

Direct Vehicle Base Fitment: This premium yellow LED module upgrade kit is engineered to provide an exact factory-spec physical fit for modern vehicle platforms utilizing the standardized ECE automotive XLS L1, L1B, and L1B/6 framework. It is a direct plug-and-play upgrade that inserts into your original factory fog lamp assembly. It matches factory tracking codes 12Y3, L1BNE, and Y02. It is engineered exclusively for front bumper fog light configurations.

Installation Tool Included For Hassle-Free Swapping

Do not worry about struggling with tight quarters or trying to squeeze pliers into your bumper lining. This complete retail package includes the specialized OSRAM installation key tool. This tool contours perfectly to the alignment notches of the LED module, letting you safely twist and unlock your stubborn factory bulbs and easily click your new high-powered upgrades into place without damaging the locking tabs or scratching the assembly components.

The Ultimate Performance Upgrade: Over Double the Factory Output

Do not settle for weak, underpowered lighting from the dealership. This retail upgrade kit completely redefines front fog lighting performance:

• The Standard Factory OEM L1B Module: Puts out approximately 310 Lumens. It is dialed down drastically from the factory to satisfy standard global compliance laws.

• This Upgraded OSRAM L1CY Kit: Unleashes a blistering 680 Lumens (±20%) of deep selective yellow light.

• The Performance Jump: You are getting well over double the raw brightness projected onto the road below you compared to standard factory chips. This drastically broadens your field of view and cuts right through adverse conditions, all while utilizing the exact same factory fog light housing.

IMPORTANT FITMENT CHECK: FRONT FOG BULB ONLY

Please verify your vehicle's structural lighting requirements before ordering to ensure a perfect fit:

• THIS PRODUCT (OSRAM L1CY): This is a high-power FRONT FOG LIGHT upgrade module designed to fit into the standard L1B / L1B/6 LED fog assembly. It locks into place using a specialized PGJi8.5d-29 base.

• WHAT THIS IS NOT (OSRAM LY5B): This product WILL NOT FIT rear turn signal housings. Turn signal positions utilize the LY5B standard, which uses a completely different, smaller mechanical tab alignment configuration.

Genuine Automotive Technology Framework

OSRAM is the original equipment manufacturer (OEM) that develops the lighting platforms found inside modern vehicles. This premium L1CY retail kit provides that same factory-certified structural build quality, but configures it for maximum performance. Emitting a deep 2700K selective yellow beam, these modules feature OSRAM's highly regulated internal electronic circuitry. They maintain a safe, ultra-efficient power draw that prevents heat damage inside tight plastic bumper cavities, completely preventing dashboard bulb-out errors.

Target Vehicle & Platform Application Reference

This direct-replacement LED upgrade twin-pack is a perfect structural match for front fog light housings on the following vehicle platforms:

• Toyota Corolla & Corolla Cross: Front Bumper Fog Lights

• Toyota RAV4: Front Bumper Fog Lights

• Toyota Venza: Front Bumper Fog Lights

• Toyota Highlander: Front Bumper Fog Lights

• Toyota Prius / Prius AWD-e: Front Bumper Fog Lights

• Lexus UX Series (UX200 / UX250h / UX300h): Front Bumper Fog Lights

• Lexus LX Series (LX600): Front Bumper Fog Lights

• Honda Civic / Accord / CR-V: Global platforms utilizing factory-installed L1B / L1B/6 type fog light modules.

Product Strategic Advantages

• Massive Brightness Jump: Experience up to 680 lumens of focused, weather-cutting yellow illumination to instantly increase your tracking vision at night.

• Standardized PGJi8.5d-29 Base: Precision-machined terminal profile twists directly into your OEM fog light assembly housing with zero cutting, slicing, or mounting bracket modifications required.

• Low-Wattage Thermal Control: Optimized electrical architecture draws minimal power while pushing peak lumen thresholds, keeping your factory wiring loops cool and safe.

• IP67 Waterproofing: Completely protected by integrated rubber compression seals that block out under-car spray, mud, road grime, deep puddles, and high-pressure car washes.

Part Number & Industry Designation Cross-Reference

This specialized twin-pack matches the following manufacturer and engineering codes:

• OSRAM Ordering Reference: L1CY / XLS L1BNE Y02 / 12Y3

• Industry Standard Footprint Codes: XLS L1, L1B, L1B/6 Series

• Base Fitment Interface: PGJi8.5d-29 Pin Grid

• Fits Within Factory Bumper Housing Assemblies: 81210-12240 / 81220-12240

Simple Installation and Clean Handling Tips

INSTALLATION NOTICE: Always ensure your vehicle's engine is fully turned off, the parking brake is engaged, and the fog light dashboard switch is set to off before accessing your bumper assembly.

Pro-Tip: Access your front fog lights easily by unfastening the front wheel well liner screws or dropping the lower engine splash shield. Reach into the bumper housing, slide the included OSRAM installation tool onto the old factory module, twist counter-clockwise to unlock, and disconnect the harness. Click the wiring loom into the new OSRAM L1CY module, insert it into the alignment slots using the tool, and twist firmly clockwise until it clicks shut. No additional household tools are required.

Product Specifications

• Product Type: Automotive Front Fog Light LED Replacement Module Kit

• Technology Framework: OSRAM High-Precision Chip-on-Board (CoB) LED

• Emitted Color Profile: 2700K Selective Weather-Yellow

• Luminous Flux Output: 680 Lumens (±20%)

• Power Rating: 12V Nominal / 6.6W Power Draw

• Included Extras: 1 Custom LED Module Removal Tool Key

• What's Included: 2 Individual OSRAM L1CY LED Modules and 1 Installation Tool (1 Complete Set)

The HID Concept Advantage

• Premium Product Performance: Buy with absolute peace of mind. We specialize exclusively in top-tier automotive lighting and electrical equipment, ensuring every component meets rigorous quality-control benchmarks. Avoid questionable, low-quality clones and receive 100% factory-fresh, reliable hardware.

• Immediate Dispatch from Chicago: Shipped directly from our clean, domestic warehouse facility in Chicago, IL via expedited mail. Skip the long customs delays, import tariffs, and damaged transit packaging common with overseas drop-shippers.

• Automotive Specialist Support: Vehicle lighting optimization is our exclusive expertise. If you have questions regarding bulb compatibility, model year variations, or complex vehicle wiring configurations, our local Chicago team is standing by to help.

 USPS Ground Advantage: (3-6 business days)
 USPS Priority Mail: (2-3 business days for most states)
 USPS Express Mail: (Next day for most states)
 International Standard Shipping: (usually within 2-3 weeks)
 International Expedited Shipping: (usually within 1-5 days)