Angle Tilt Sensor / Inclinometer with Remote Display – Pendulum Type

0.1° Resolution | Remote LCD Display | Zero Function

This M‑SURE Angle Tilt Sensor / Inclinometer is a precision pendulum‑type angle measurement system (not a spirit or laser level) designed for accurate tilt and incline measurement where a remote display is required. The sensor uses a weighted internal pendulum as a reference, while the external LCD display calculates and shows the measured angle with a resolution of 0.1 degrees.

Ideal for machinery, fixtures, installation setups, and monitoring applications, the remote display allows the readout to be positioned away from the sensor, improving visibility and ease of use in confined or fixed installations.

Key Features

• Pendulum‑type angle tilt sensor / inclinometer
• High resolution: 0.1°
• Remote LCD display for flexible viewing
• Zero function – set zero at any position
• On/Off control on the display unit
• Detachable sensor and display via RJ45 cable
• Mounting flange with two fixing holes on sensor body

Operation & Design

As the angle sensor is rotated, an internal weighted pendulum provides a stable gravity reference. The angle is calculated electronically and displayed on the remote LCD unit, allowing precise and repeatable angle measurement.

The Zero function button enables the display to be set to 0° at any reference position, making it ideal for relative angle measurements and setup work.

Power & Connectivity

• Battery powered: CR2032 battery
• Battery located behind a twist‑lock compartment on the rear of the display
• Sensor to display cable length: 910 mm (36")
• Connection via RJ45 Cat 5E Ethernet cable
• Sensor and display can be disconnected

Cable Extension Notes:

• Longer cables can be purchased separately
• Recommended maximum cable length: 5 metres
• Extensions must be screened RJ45 Cat 5 cable to avoid interference

Installation & Mounting

• Sensor body fitted with a mounting flange
• Two mounting holes for secure fixing to equipment, fixtures, or frames
• Suitable for fixed installations where the sensor and display need to be separated

Important Usage Notes

• ❗ Sensor must not be subjected to harsh vibration
• ❗ Protect sensor from coolant, moisture, and ingress
• Designed for controlled environments and stable installations

Typical Applications

• Machine and fixture setup
• Angle and tilt monitoring
• Installation and commissioning work
• Engineering and technical measurement tasks
• Situations where a remote readout is required

About M‑SURE

M‑SURE is a trusted brand focused on delivering practical, reliable measurement tools for engineering, workshop, and industrial applications. Known for accuracy, ease of use, and strong value for money, M‑SURE products are widely used by engineers, technicians, installers, and maintenance professionals.

✅ About Us – Machine DRO | Buy With Confidence

• 🇬🇧 UK‑based specialist retailer of engineering and metrology equipment
• ⭐ Over a quarter of a million sales completed across our stores
• 📦 Same‑day despatch on in‑stock items when ordered within our working‑day cut‑off
• ✅ Fast delivery, accurate listings, and knowledgeable customer support

Buy with confidence from Machine DRO, a trusted UK supplier supporting workshops and industry professionals nationwide.

Condition

• Brand new
• Supplied as pictured and described