Hart & Cooley 5TLCEK15 TLC All Fuel Chimney System 15° insulated elbow kit, 5" diameter, all 304 stainless steel construction. Includes 2 elbow sections, 2 locking bands, 1 elbow support, and all hardware for chimney offset installations.

This insulated 15-degree elbow kit is used when offset is required in TLC All Fuel Chimney System installations to avoid rafters, plumbing, HVAC equipment, or roof peaks. The elbow is fully insulated with mineral wool and can be used with the same 2-inch clearance to combustibles as standard chimney lengths. The kit includes 2 elbow sections that can be paired to create chimney offsets, 2 locking bands (required on all elbows), 1 elbow support (required for all offset installations and supports 15 ft of chimney), and all hardware needed for installation.

The all 304 stainless steel construction (inner liner and outer casing) provides superior corrosion resistance and durability. The 5" diameter accommodates medium-capacity chimneys serving typical residential appliances. The 15° angle provides gradual offset for smoother gas flow compared to sharper angles. The elbows do not have twist-locking ridges, so they can be rotated to attain optimum positioning offset and allow chimney to return to correct vertical alignment prior to installing locking bands.

Suitable for wood, oil, or gas burning appliance installations (all fuel). May NOT be used outdoors. Only one pair (2 elbows) may be used for interior offset installations. Maximum 6 feet is allowable between offsets.

Key Specifications:

Diameter: 5" (127 mm)

Elbow angle: 15 degrees

Material: 304 Stainless Steel (inner + outer)

Pieces: 2 elbows (2-piece set)

Kit contents: 2 elbows, 2 locking bands, 1 elbow support, all hardware

Insulation: Mineral wool (fully insulated)

Clearance: 2 inches to combustibles

Fuel types: All Fuel (oil, gas, wood)

Dimensions: A=3 3/8", B=2 7/16", C=11 5/16"

Interior installation: One pair only

Outdoor use: NOT permitted

Elbow support: Required (supports 15 ft chimney)

Locking bands: Required on all elbows

Max distance between offsets: 6 feet

Ideal for wood burning stove, oil furnace, gas furnace chimney installations requiring offset to avoid building obstructions, rafters, plumbing, HVAC equipment, or roof peaks in residential applications. All stainless steel construction provides superior durability and corrosion resistance.

new may or may not include original packaging because of storage space

Economy shipping (flat rate). Message seller for expedited shipping options.

14-day return policy. Buyer pays return shipping unless item not as described.