• Notice: 1. Cause the same car model may be differently produced in different countries. 2. Please ensure the part of your car like our picture shows, or it will not fit, if any differences, please contact with us before purchase, thanks! 3. If have any questions please contact us, thanks!
  •  
  • FITMENT INFORMATION: Compatible for Jeep Wrangler JK JL JLU JT Rubicon Sahara Sports 2007-2021
  •  
  • PRODUCT FEATURES: Size: As pictures show Color: Black Material: high-quality ABS /Stainless Steel Include: 1pc Antenna Base Cover Replacement
  •  
  • Black Radio Antenna Base Cover Aerial Trim for 2007+ Jeep Wrangler JK & JL JT US

    Notice:
    1. Cause the same car model may be differently produced in different countries.
    2. Please ensure the part of your car like our picture shows, or it will not fit, if any differences, please contact with us before purchase, thanks!
    3. If have any questions please contact us, thanks!

     

    FITMENT INFORMATION:
    Compatible for Jeep Wrangler JK JL JLU JT Rubicon Sahara Sports 2007-2021

     

    PRODUCT FEATURES:
    Size: As pictures show
    Color: Black
    Material: high-quality ABS /Stainless Steel
    Include: 1pc Antenna Base Cover Replacement

     

    ITEM SPECIFICATIONS:
    100% brand new and high quality guaranteed.
    Decorate your cars with charming luxury vivid.
    Easy to use and to operate at affordable prices.
    Perfect cover that is useful, helpful and so practical.
    Easy to use and to operate.
     

    PACKAGE CONTENTS:
    1pc Antenna Base Cover Replacement

     

    NOTES:
    Please check whether this item can fit on your car before purchasing

     

    Installation method:
    1. Pls use alcohol or an agent to clean the position of the installation (to make sure it is without the grease. Wax or dust etc.)
    2. Pls ensure the position of installation can be completely fit the case before install, (Note: if there any questions or misfit, please contact us)
    3. Rive the strong double-sided adhesive of the back, if meet the case of a relatively low temperature, please heat it via the hairdryer or lighter.
    4. According to the comparison stick up it and press about 1-2 minutes (Note: do not wash your car in 24hours, the adhesive should be fixed after 12 hours )
    5. The installation has been completed, DIY item --- Easy to install


    Item Specifics
    Brand Unbranded
    Type Antenna Base Cover
    Color Black
    Features Easy Installation
    Material ABS Stainless Steel
    Manufacturer Warranty 5 Years
    Material ABS Stainless Steel
    Manufacturer Warranty 5 Years

    Payment

    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.

    (2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (3). Before payment,Please keep the consistency of Paypal address and ebay address.

    (4). Quantity orders are welcome!

    Shipping

    (1) All items will be shipped in 24 hours after receiving your payment .

    (2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    Returns

    (1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    (2). All returned items should be in the original packaging , return tracking information should be provided ..

    (3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .

    Contact Us

    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.

    FAQ

    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.

    Picture
    Black Radio Antenna Base Cover Aerial Trim for 2007+ Jeep Wrangler JK & JL JT US

    Notice:
    1. Cause the same car model may be differently produced in different countries.
    2. Please ensure the part of your car like our picture shows, or it will not fit, if any differences, please contact with us before purchase, thanks!
    3. If have any questions please contact us, thanks!

     

    FITMENT INFORMATION:
    Compatible for Jeep Wrangler JK JL JLU JT Rubicon Sahara Sports 2007-2021

     

    PRODUCT FEATURES:
    Size: As pictures show
    Color: Black
    Material: high-quality ABS /Stainless Steel
    Include: 1pc Antenna Base Cover Replacement

     

    ITEM SPECIFICATIONS:
    100% brand new and high quality guaranteed.
    Decorate your cars with charming luxury vivid.
    Easy to use and to operate at affordable prices.
    Perfect cover that is useful, helpful and so practical.
    Easy to use and to operate.
     

    PACKAGE CONTENTS:
    1pc Antenna Base Cover Replacement

     

    NOTES:
    Please check whether this item can fit on your car before purchasing

     

    Installation method:
    1. Pls use alcohol or an agent to clean the position of the installation (to make sure it is without the grease. Wax or dust etc.)
    2. Pls ensure the position of installation can be completely fit the case before install, (Note: if there any questions or misfit, please contact us)
    3. Rive the strong double-sided adhesive of the back, if meet the case of a relatively low temperature, please heat it via the hairdryer or lighter.
    4. According to the comparison stick up it and press about 1-2 minutes (Note: do not wash your car in 24hours, the adhesive should be fixed after 12 hours )
    5. The installation has been completed, DIY item --- Easy to install

    Item Specifics
    Brand :Unbranded
    Type :Antenna Base Cover
    Color :Black
    Features :Easy Installation
    Material :ABS Stainless Steel
    Manufacturer Warranty :5 Years
    Material :ABS Stainless Steel
    Manufacturer Warranty :5 Years



    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.

    (2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (3). Before payment,Please keep the consistency of Paypal address and ebay address.

    (4). Quantity orders are welcome!

    (1) All items will be shipped in 24 hours after receiving your payment .

    (2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    (2). All returned items should be in the original packaging , return tracking information should be provided ..

    (3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .

    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.

    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.


    All rights reserved.



    On Jun 5, 2026 at 08:26:49 PDT, seller added the following information:

    Datacaciques