eBay

1/4" Shank Carbide Compression Flush Trim Router Bits – 1/2" Cutting Diameter

Features:

Durable Carbide Construction: Tungsten carbide cutting edges bonded to a hardened steel shank provide excellent wear resistance and long-lasting sharpness, even in demanding applications.
Compression Cutting Geometry: The up-cut/down-cut spiral design produces cleaner cuts on both faces of the workpiece, reducing tear-out while improving chip evacuation and minimising heat build-up.
Guide Bearings: Available with either a top-mounted bearing or dual top and bottom bearings for accurate flush trimming. Suitable for both handheld and table-mounted routers with a 1/4" collet.
Wide Material Compatibility: Suitable for MDF, melamine, particleboard, plywood, laminates, veneers, hardwoods, and softwoods.

Important Usage Information:

Designed primarily for flush trimming and template-guided cutting operations.
For best results when cutting internal openings, remove the majority of the waste material first using a suitable saw or router bit.
Leave a small amount of material for the flush trim bit to remove during the final pass.
Where material removal is required, make multiple shallow passes rather than a single full-depth cut.
Ensure the router bit is securely fitted in the correct collet and operated at an appropriate speed for the application.

Specifications:

Available Options: