Up for sale is a CLAed and PENTAX PK converted sample of the rare classic Yashica ML 24mm f/2.8 Super Wide Angle lens.

Designedesigned for Contax and Yashica  film cameras during the period when Yashica was producing both their own and Zeiss-branded-lenses, this lens comes from their top-end "ML" series.

This lens originally featured a C/Y bayonet mount, which has been replaced with a genuine Pentax PK mount removed from a Pentax M series lens. As a result, it is usable on ALL Pentax K mount cameras, from the earliest K series film cameras through the latest Film DSLRs such as the KP and  K1mk2. In addition, it can be mounted with an inexpensive adapter on a variety of formats, including Canon E F and Mirrorless, m4/3, Sony E (A7), Fuji, Nikon, etc.

The lens functions like an m42 in manual mode, meaning the blades stop down as the aperture ring is turned, making it easiest to use in either green button or "A" modes on Pentax DSLR.

While Disassembled, this lens was also CLAed (Clean/Lube/Adjust) with full removal of original lubricant and replacement with modern grease for increased smoothness!


CLA FAQ:

Q: What  services do you perform on the lens before sale?

With the lens disassembled, I perform a full CLA (Clean Lube Adjust). This entails cleaning out any internal and external soiling, cleaning aperture blades of grease that can slowing, re-lubing the focus helical (even seemingly fine "mint" vintage lenses typically have grit and degraded grease in their helicals), and adjusting all components for tightness and accuracy. Where there is extensive dust or internal lens soiling, I will disassemble lens cells and clean off surfaces; however, it is my general philosophy to keep lens elements in their factory position when at all possible to ensure optimum performance.

Q: DUST? What do you mean DUST?

A: All vintage lenses have dust in them. In fact, they had dust in them when they were brand new from the factory! This is because prior to the advent of very modern sealed designs, lenses were not put together in a clean room environment, and the natural static charge of the glass tends to attract dust particles. Coupled with the open designs used in these lenses, it is virtually impossible to find any vintage lens without some degree of dust particles visible when you look closely through the lens. All of my CLA lenses have at minimum the exterior internal cell surfaces wiped with a dust-free, lab-grade optical tissue and then blown off with an air bulb prior to reassembly and thus have a significantly below average amount of dust for a vintage lens.

Includes original Front Cap and m42 rear cap.

CLA FAQ:

Q: What  services do you perform on the lens before sale?

With the lens disassembled, I perform a full CLA (Clean Lube Adjust). This entails cleaning out any internal and external soiling, cleaning aperture blades of grease that can slowing, re-lubing the focus helical (even seemingly fine "mint" vintage lenses typically have grit and degraded grease in their helicals), and adjusting all components for tightness and accuracy. Where there is extensive dust or internal lens soiling, I will disassemble lens cells and clean off surfaces; however, it is my general philosophy to keep lens elements in their factory position when at all possible to ensure optimum performance.

Q: DUST? What do you mean DUST?

A: All vintage lenses have dust in them. In fact, they had dust in them when they were brand new from the factory! This is because prior to the advent of very modern sealed designs, lenses were not put together in a clean room environment, and the natural static charge of the glass tends to attract dust particles. Coupled with the open designs used in these lenses, it is virtually impossible to find any vintage lens without some degree of dust particles visible when you look closely through the lens. All of my CLA lenses have at minimum the exterior internal cell surfaces wiped with a dust-free, lab-grade optical tissue and then blown off with an air bulb prior to reassembly and thus have a significantly below average amount of dust for a vintage lens.

Includes original Front Cap and m42 rear cap.

091