•  
  •  
  • What Is A Crankshaft?
  • A crankshaft is a part in a reciprocating engine that rotates due to the reciprocating motion of the pistons. However in a pump, the crankshaft's motion causes the piston to move back and forth.The crankshaft is connected to the pistons by "crankpins" which have an offset axis allowing this conversion of motion to be accomplished. Since the common four-stroke cycle of the reciprocating engine isn't continuous, the crankshaft is often connected to a flywheel which is used to store rotational energy in order to reduce the pulsation or choppiness of the pistons.
  •  
  • What are the symptoms of a broken crankshaft?
  • Crankshaft Rod Bearing Kit EJ257 2.5L EJ255 For 2004-2018 Subaru Nitride Treated 12200AA330

     

     

    What Is A Crankshaft?

    A crankshaft is a part in a reciprocating engine that rotates due to the reciprocating motion of the pistons. However in a pump, the crankshaft's motion causes the piston to move back and forth.The crankshaft is connected to the pistons by "crankpins" which have an offset axis allowing this conversion of motion to be accomplished. Since the common four-stroke cycle of the reciprocating engine isn't continuous, the crankshaft is often connected to a flywheel which is used to store rotational energy in order to reduce the pulsation or choppiness of the pistons.

     

    What are the symptoms of a broken crankshaft?

    Your “Check Engine” Light is Blinking.

    It's Difficult to Get Your Vehicle to Start.

    Your Vehicle is Stalling and/or Backfiring.

    The Engine is Making Your Vehicle Vibrate.

     

    If the crankshaft position sensor or its wiring have any issues, it can cause the crankshaft signal to be cut off while the engine is running, which can cause the engine to stall. This is usually a symptom of a wiring problem, however a bad crankshaft position sensor can also produce this symptom.

     

    Features:

    1) All parts are hand inspected off the line before packaging and once again by our team before shipment.

    2) According to the original factory specifications. Superior performance and reliability

    3) Perfect match for the original car.

    4) Easy installation.

    5) High quality components and materials. Stable characteristics, high reliability.

     

     

    OE / OEM Part Number:

     

    (1) Crankshaft OE#:
    12200AA430
    12200AA400
    12200AA330


    (2) Main & Rod Bearing Kit OE#:
    4B8296H-STD,  5M8309H-STD


    (3) Connecting Rods OE#:
    12100AA181, 12100 AA181, 12100-AA181
    12100AA180, 12100 AA180, 12100-AA180

     

    (4) Head Gasket Set OE#:

    HGS715, HS26170PT1, HBK715, ES72212

     

     

    Fits for:

    Direct Fit For All EJ257 and EJ255 Engines!

    2004-2018 Subaru Impreza WRX STI

    2006-2014 Subaru Impreza WRX

    2006-2013 Subaru Forester XT Turbo

    2006-2007 / 2010-2012 Subaru Legacy GT Turbo

    2006-2007 Subaru Outback XT Turbo

     

    Note:

    1-Firstly, To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table.

    2-Please make sure the OE number matches the part you are replacing.

    3-Please be very careful to check our photos, make sure the photo showed is same as you wanted.

     

    Package Includes:

    1XCrankshaft

    1x Main Bearing Set Standard Size (for Flange position #5)

    1x Rod Bearing Set Standard Size (for 52mm journal size)

    4x Connecting Rods

    (as shown in the picture)

     

    ★ Installation Guide

    -Basic Installation Steps

    ① Turn off the vehicle and cut power, ensure the engine is in a cooled state.

    ② Locate the engine piston connecting rod installation positions, remove the old connecting rods and related parts.

    ③ Clean impurities on the installation contact surface, confirm the new connecting rods are compatible and align with the installation positions.

    ④ Install relevant fixing parts to ensure stable connection.

    ⑤ Check the installation status, confirm the component operation with no noticeable abnormalities.

    !!! THIS INSTALLATION GUIDE IS FOR REFERENCE ONLY. THE ACTUAL INSTALLATION PROCESS SHALL PREVAIL.

     

    -Important Notes

    ☑ Please check the product specification information before purchase to confirm it is compatible with your vehicle.

    ☑ Handle gently during operation to prevent connecting rod deformation or interface damage.

    ☑ Professional installation recommended for best results.

     

    ★ Why Choose Us

    -Clear Product Information

    We are committed to providing clear product information to make your shopping experience easier and more convenient.

    -Responsive Service Support

    We value your feedback and aim to facilitate solutions through attentive communication channels.

     

     

    FAQ:

    Where is my item?
    All items are shipped out within same business days after full payment has been cleared. An automated email will be sent containing the tracking number.

     

    The tracking number does not update

    The automated email from Ebay system means your order has been processed but does not mean it has been shipped out. It may take up to 24 hours for the system to update.

     

    I purchased by mistake, how do I cancel the order?
    Please contact us ASAP. If the item has not been shipped out we can cancel the order for you. If the item was shipped out you can refuse the package and wait for the item to return to us.

     

    I received your item but it does not fit or is defective

    Please contact us so we can assist you on the matter.

     

    I tried to contact you, but cannot reach anyone.

    Our officer hours are 9:30AM - 5:30PM PST Monday - Friday. Emails are the best way to contact us and should receive a response within 24 hours.

     

    Certificates of our product:

    Our Factory:


    Item Specifics
    Fitment Type :Direct Replacement
    Manufacturer Part Number :12200AA430,12100AA181, 12100 AA181,12100AA180
    Year :2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
    Brand :CARBOLE
    Interchange Part Number :12200AA430 12200AA330
    OE/OEM Part Number :12200AA430;12200-AA430.12100AA181, 12100 AA181,12100AA180
    Placement on Vehicle :Front
    Model :For Baja, Forester, Impreza, Legacy, Outback, STI, WRX
    Notes :Direct fit for all EJ257 and EJ255 engines
    Engine :2.5L H4 DOHC Turbo, 2.5L H4 Turbo
    Manufacturer Warranty :Lifetime
    Superseded Part Number :12200AA430, 12200AA400, 12200AA330
    Fits for 1 :2004-2018 Subaru Impreza WRX STI
    Fits for 2 :2006-2014 Subaru Impreza WRX
    Fits for 3 :2006-2013 Subaru Forester XT Turbo
    Fits for 4 :2006-2007 / 2010-2012 Subaru Legacy GT Turbo
    Fits for 5 :2006-2007 Subaru Outback XT Turbo
    Hardness :Greater than 50 HRC
    Tensile strength and elongation :950-6.5
    Type :Engine Rebuild Kit
    Features :Durable
    Crankshaft OE# :12200AA400, 12200AA330,12200AA430
    Main & Rod Bearing Kit OE# :4B8296H-STD & 5M8309H-STD, 5M8309H,4B8296H
    Connecting Rods OE# :12100AA181, 12100-AA181,12100AA180


    content_src_url

    Payment
    • Payment:We accept Credit card, Debit card, Apple Pay, Google Pay and PayPal. 
    • Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).
    • Most of the items come with a 30-day warranty covering manufacturing defect. High value products would get a longer warranty, some of them up to 2 year or 5 years or lifetime warranty, excluding any damage by the user.
    Shipping
    • Processing time: Within 1 business day after payment
    • Ship from: California USA or KY Warehouse Or IL warehouse Or NY Warehouse.
    • Time of delivery:
    • US: about 1-6 business days;
    • Note:Please leave us your detailed valid street address because big package is not allowed to be stored in PO.BOX.
    Returns

    1)Defective product can be returned for exchange and the exchange must be notified within 30 days from the date of purchase. All items must be returned in NEW condition, including the packaging and all accessories.

    2)Buyers are responsible for the item return shipping fee.  

    3)  Please note that all return must be pre-approved by our co-worker,and it have a return merchandise anthorization(RMA)number.Unauthorzed return will not be accepted.

    About Us

    Carbole is one of the most experienced manufacturers in performance fuel and ignition systems around the world, proving itself on the racetracks and drag strips of the world. Carbole offers a comprehensive selection of performance products, including coils, digital fuel injection systems, fuel injectors, distributors, caps, rotors, ignition wires etc. Carbole products are 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance. 100% Quality Guarantee! 100% Fast Delivery! 100% Money Back Guarantee!

    Carbole produces the coils only with high quality materials to ensure the performance and durability, having 15% more energy than OE coils.
    1. Wire--Imported from German Elektrisoal, top quality in the world.

    2. Epoxy-- Imported from German Elektrisoal, top quality high insulation epoxy.

    3. Plastic GE Valox resin, professional high voltage di-electric resistant resin.

    4. Manufactured in facility TS16949 quality control system certified.

    5. Enable to Keep Releasing energy over 6000 RPM.

    6. Continuous Ignition.

    7. Ignition Coil Born For Racing

    Contact us

    1) Please feel free to contact if you have any problem, Please do not give us a bad review immediately, or directly open CASE or Return. We will give you a satisfactory solution.

    2) We greatly appreciate your Five Stars Positive feedback. It means a lot to us. Thanks for your support.

    3)You can bookmark our store for your next purchase

    Crankshaft Rod Bearing Kit EJ257 2.5L EJ255 For 2004-2018 Subaru Nitride Treated 12200AA330

     

     

    What Is A Crankshaft?

    A crankshaft is a part in a reciprocating engine that rotates due to the reciprocating motion of the pistons. However in a pump, the crankshaft's motion causes the piston to move back and forth.The crankshaft is connected to the pistons by "crankpins" which have an offset axis allowing this conversion of motion to be accomplished. Since the common four-stroke cycle of the reciprocating engine isn't continuous, the crankshaft is often connected to a flywheel which is used to store rotational energy in order to reduce the pulsation or choppiness of the pistons.

     

    What are the symptoms of a broken crankshaft?

    Your “Check Engine” Light is Blinking.

    It's Difficult to Get Your Vehicle to Start.

    Your Vehicle is Stalling and/or Backfiring.

    The Engine is Making Your Vehicle Vibrate.

     

    If the crankshaft position sensor or its wiring have any issues, it can cause the crankshaft signal to be cut off while the engine is running, which can cause the engine to stall. This is usually a symptom of a wiring problem, however a bad crankshaft position sensor can also produce this symptom.

     

    Features:

    1) All parts are hand inspected off the line before packaging and once again by our team before shipment.

    2) According to the original factory specifications. Superior performance and reliability

    3) Perfect match for the original car.

    4) Easy installation.

    5) High quality components and materials. Stable characteristics, high reliability.

     

     

    OE / OEM Part Number:

     

    (1) Crankshaft OE#:
    12200AA430
    12200AA400
    12200AA330


    (2) Main & Rod Bearing Kit OE#:
    4B8296H-STD,  5M8309H-STD


    (3) Connecting Rods OE#:
    12100AA181, 12100 AA181, 12100-AA181
    12100AA180, 12100 AA180, 12100-AA180

     

    (4) Head Gasket Set OE#:

    HGS715, HS26170PT1, HBK715, ES72212

     

     

    Fits for:

    Direct Fit For All EJ257 and EJ255 Engines!

    2004-2018 Subaru Impreza WRX STI

    2006-2014 Subaru Impreza WRX

    2006-2013 Subaru Forester XT Turbo

    2006-2007 / 2010-2012 Subaru Legacy GT Turbo

    2006-2007 Subaru Outback XT Turbo

     

    Note:

    1-Firstly, To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table.

    2-Please make sure the OE number matches the part you are replacing.

    3-Please be very careful to check our photos, make sure the photo showed is same as you wanted.

     

    Package Includes:

    1XCrankshaft

    1x Main Bearing Set Standard Size (for Flange position #5)

    1x Rod Bearing Set Standard Size (for 52mm journal size)

    4x Connecting Rods

    (as shown in the picture)

     

    ★ Installation Guide

    -Basic Installation Steps

    ① Turn off the vehicle and cut power, ensure the engine is in a cooled state.

    ② Locate the engine piston connecting rod installation positions, remove the old connecting rods and related parts.

    ③ Clean impurities on the installation contact surface, confirm the new connecting rods are compatible and align with the installation positions.

    ④ Install relevant fixing parts to ensure stable connection.

    ⑤ Check the installation status, confirm the component operation with no noticeable abnormalities.

    !!! THIS INSTALLATION GUIDE IS FOR REFERENCE ONLY. THE ACTUAL INSTALLATION PROCESS SHALL PREVAIL.

     

    -Important Notes

    ☑ Please check the product specification information before purchase to confirm it is compatible with your vehicle.

    ☑ Handle gently during operation to prevent connecting rod deformation or interface damage.

    ☑ Professional installation recommended for best results.

     

    ★ Why Choose Us

    -Clear Product Information

    We are committed to providing clear product information to make your shopping experience easier and more convenient.

    -Responsive Service Support

    We value your feedback and aim to facilitate solutions through attentive communication channels.

     

     

    FAQ:

    Where is my item?
    All items are shipped out within same business days after full payment has been cleared. An automated email will be sent containing the tracking number.

     

    The tracking number does not update

    The automated email from Ebay system means your order has been processed but does not mean it has been shipped out. It may take up to 24 hours for the system to update.

     

    I purchased by mistake, how do I cancel the order?
    Please contact us ASAP. If the item has not been shipped out we can cancel the order for you. If the item was shipped out you can refuse the package and wait for the item to return to us.

     

    I received your item but it does not fit or is defective

    Please contact us so we can assist you on the matter.

     

    I tried to contact you, but cannot reach anyone.

    Our officer hours are 9:30AM - 5:30PM PST Monday - Friday. Emails are the best way to contact us and should receive a response within 24 hours.

     

    Certificates of our product:

    Our Factory:

    Item Specifics
    Fitment Type :Direct Replacement
    Manufacturer Part Number :12200AA430,12100AA181, 12100 AA181,12100AA180
    Year :2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
    Brand :CARBOLE
    Interchange Part Number :12200AA430 12200AA330
    OE/OEM Part Number :12200AA430;12200-AA430.12100AA181, 12100 AA181,12100AA180
    Placement on Vehicle :Front
    Model :For Baja, Forester, Impreza, Legacy, Outback, STI, WRX
    Notes :Direct fit for all EJ257 and EJ255 engines
    Engine :2.5L H4 DOHC Turbo, 2.5L H4 Turbo
    Manufacturer Warranty :Lifetime
    Superseded Part Number :12200AA430, 12200AA400, 12200AA330
    Fits for 1 :2004-2018 Subaru Impreza WRX STI
    Fits for 2 :2006-2014 Subaru Impreza WRX
    Fits for 3 :2006-2013 Subaru Forester XT Turbo
    Fits for 4 :2006-2007 / 2010-2012 Subaru Legacy GT Turbo
    Fits for 5 :2006-2007 Subaru Outback XT Turbo
    Hardness :Greater than 50 HRC
    Tensile strength and elongation :950-6.5
    Type :Engine Rebuild Kit
    Features :Durable
    Crankshaft OE# :12200AA400, 12200AA330,12200AA430
    Main & Rod Bearing Kit OE# :4B8296H-STD & 5M8309H-STD, 5M8309H,4B8296H
    Connecting Rods OE# :12100AA181, 12100-AA181,12100AA180


    • Payment:We accept Credit card, Debit card, Apple Pay, Google Pay and PayPal. 
    • Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).
    • Most of the items come with a 30-day warranty covering manufacturing defect. High value products would get a longer warranty, some of them up to 2 year or 5 years or lifetime warranty, excluding any damage by the user.
    • Processing time: Within 1 business day after payment
    • Ship from: California USA or KY Warehouse Or IL warehouse Or NY Warehouse.
    • Time of delivery:
    • US: about 1-6 business days;
    • Note:Please leave us your detailed valid street address because big package is not allowed to be stored in PO.BOX.

    1)Defective product can be returned for exchange and the exchange must be notified within 30 days from the date of purchase. All items must be returned in NEW condition, including the packaging and all accessories.

    2)Buyers are responsible for the item return shipping fee.  

    3)  Please note that all return must be pre-approved by our co-worker,and it have a return merchandise anthorization(RMA)number.Unauthorzed return will not be accepted.

    Carbole is one of the most experienced manufacturers in performance fuel and ignition systems around the world, proving itself on the racetracks and drag strips of the world. Carbole offers a comprehensive selection of performance products, including coils, digital fuel injection systems, fuel injectors, distributors, caps, rotors, ignition wires etc. Carbole products are 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance. 100% Quality Guarantee! 100% Fast Delivery! 100% Money Back Guarantee!

    Carbole produces the coils only with high quality materials to ensure the performance and durability, having 15% more energy than OE coils.
    1. Wire--Imported from German Elektrisoal, top quality in the world.

    2. Epoxy-- Imported from German Elektrisoal, top quality high insulation epoxy.

    3. Plastic GE Valox resin, professional high voltage di-electric resistant resin.

    4. Manufactured in facility TS16949 quality control system certified.

    5. Enable to Keep Releasing energy over 6000 RPM.

    6. Continuous Ignition.

    7. Ignition Coil Born For Racing

    1) Please feel free to contact if you have any problem, Please do not give us a bad review immediately, or directly open CASE or Return. We will give you a satisfactory solution.

    2) We greatly appreciate your Five Stars Positive feedback. It means a lot to us. Thanks for your support.

    3)You can bookmark our store for your next purchase


    All right reserved.


    Datacaciques