The Heritage Acoustics SS-6VC is a multi-zone stereo speaker selector designed for whole-house audio distribution. It allows you to connect a single stereo amplifier or receiver to up to six different pairs of speakers across various rooms or zones, providing localized volume control for each area.

Key Features & Description

• 6-Zone Distribution: Route audio from one central amplifier to six independent pairs of speakers (e.g., kitchen, patio, living room, bedroom).

• Individual Volume Controls: Features six independent, front-panel rotary volume knobs (typically 12-position heavy-duty attenuators). This allows you to completely turn down the volume in one room while playing it loudly in another.

• Impedance Matching Protection: Equipped with internal impedance protection circuitry. When activated, it prevents the combined resistance of multiple speaker pairs from dropping below a safe level (usually keeping it at a stable 4 to 8 Ohms). This safeguards your power amplifier from overheating or triggering its protection mode when all zones are active simultaneously.

• Zone Isolation: Each channel features its own on/off selector button in addition to the volume knob, letting you completely cut the signal to specific zones when not in use.

• Chassis Build: Built with a low-profile, rugged metal enclosure designed to fit neatly into an audio rack or media cabinet. The front panel typically includes space above or below the buttons for custom zone labeling.

Technical Specifications

• Power Handling: Generally rated to handle roughly 70W to 100W RMS continuous per channel (with peak power handling capabilities stretching up to 200W depending on whether the manual protection circuit is engaged).

• Frequency Response: 20Hz to 20kHz, ensuring high-fidelity, distortion-free audio routing.

• Wiring Compatibility: The rear panel features spring-loaded or screw-type terminal blocks that easily accept standard 14 AWG to 18 AWG speaker wires.

• Passive Operation: The unit is entirely passive, meaning it does not require an external power outlet to operate; it runs solely off the audio signal provided by your amplifier.