Programmable directly on the bike via 8 menu items. When building a motorcycle or completely replacing an existing motorcycle's electrical wiring, a brain box is a great option for a simple, solid, and reliable wiring system. The lights are dimmed upon startup. Brain boxes with handlebar wiring adapters simplify wiring and make it almost invisible compared to other brain boxes on the market. Compatible with miniature push button control knobs that work with super thin cables. The brain boxes can be easily attached with cable ties to frame tubes or similar. All come with super clear installation instructions. – Operates with buttons or switches – High/Low beam – Integrated turn signal relay and position/running lights – Horn – Starter relay – Brake light – Ignition – Neutral switch connection – Jiffy/side stand switch connection – Turn signals and lights possible via switches – for neutral, direction indicators, oil and high beam – Dimensions: 50 mm long x 12.5 mm wide x 42 mm high – Maximum ambient temperature: 80 °C – Material: Black ABS, waterproof die-cast – Input voltage: 6 – 18 Volt – Connections: Control unit 0.14 mm², user 0.75 mm², input 1.5 mm², with 20 cm long cables – Maximum output amperes: 5 Amperes per output – Maximum amperes from 12 V connection: 20 Amperes, shock-proof short circuit Note: Connecting the starter motor directly to the brain box will cause damage. The HD starter motor requires 10 Amps for solenoid switching and requires an additional small automotive relay between the brain box starter output and the starter solenoid. Note: Replacement for 567421 Box G and 567422 Box G2.