|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Description:
Bellows Color:Black
End To End Length:1279.52 MM
End To End Length:50.375 IN
Gasket Or Seal Included:Yes
Grade Type:Regular
Inlet Line Fitting Diameter:11.66 MM
Inlet Line Fitting Diameter:0.459 IN
Inlet Line Fitting Gender:Male
Inner Tie Rods Included:Yes
Input Shaft Type:Grooved
Mounting Brackets Included:No
Mounting Hardware Included:No
Mounting Hole Quantity:2
Outer Tie Rods Included:No
Outlet Line Fitting Diameter:0.702 IN
Outlet Line Fitting Diameter:17.83 MM
Outlet Line Fitting Gender:Male
Steering Input Shaft Diameter:0.747 IN
Steering Input Shaft Diameter:18.97 MM
Total Turns Lock To Lock:3
Type:Hydraulic
Interchange Part Number:92155946, 92161579
Product Description:
Steering gear,also called steering gear, is the most important part of automobile steering system.
Power steering (PAS) or steering assist system helps drivers steer by augmenting steering effort of the steering wheel.
Power steering rack and pinion is the most important part for vehicle swerving and security assurance.
It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction,
thus making it easier to turn the wheels.
Compatible with the following vehicles:
Year Make Model Trim Engine Notes
2006 Pontiac GTO Base Coupe 2-Door 6.0L 5967CC 364Cu. In. V8 GAS OHV Naturally Aspirated Power Steering;BuyAutoParts New
2005 Pontiac GTO Base Coupe 2-Door 6.0L 5967CC 364Cu. In. V8 GAS OHV Naturally Aspirated Power Steering;BuyAutoParts New
2004 Pontiac GTO Base Coupe 2-Door 5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated Power Steering;with 16 mm Inner Tie Rod Threads; with OE # 92184103;BuyAutoParts New
Note:
In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation.
note:
1.In order to avoid the fault caused by the dirt entering the steering oil circuit, the plug on each oil port of steering pump of steering gear shall be opened before connecting the oil pipe, and the oil pipe and plug shall be carefully cleaned and deburred.
2. Turn the steering wheel to the straight ahead position.
3. Clean the mounting bracket of the steering gear and relevant mating surfaces of the steering gear.
4. For the adjustable steering column, use a suitable rope to pass through the space of the cross fork of the steering shaft, hang the steering shaft, and connect the steering shaft and the input shaft of the steering gear.
5. Turn the steering gear to the middle position to align the relevant marks at the input end and output end of the steering gear.
6. Install the steering gear on the mounting base and tighten the fixing bolts.
7. Universal joint or coupling between mounting column and steering gear.
8. For the adjustable steering column, the upper end seal of the steering gear shall not be damaged when the universal joint is installed.
9. Keep the steering wheel in straight ahead position.
10. Put the pitman arm on the steering gear to align the two marks. 10. Tighten the locknut according to the specified torque and rivet (anti loose pit)
Product Description:
Bellows Color:Black
End To End Length:1279.52 MM
End To End Length:50.375 IN
Gasket Or Seal Included:Yes
Grade Type:Regular
Inlet Line Fitting Diameter:11.66 MM
Inlet Line Fitting Diameter:0.459 IN
Inlet Line Fitting Gender:Male
Inner Tie Rods Included:Yes
Input Shaft Type:Grooved
Mounting Brackets Included:No
Mounting Hardware Included:No
Mounting Hole Quantity:2
Outer Tie Rods Included:No
Outlet Line Fitting Diameter:0.702 IN
Outlet Line Fitting Diameter:17.83 MM
Outlet Line Fitting Gender:Male
Steering Input Shaft Diameter:0.747 IN
Steering Input Shaft Diameter:18.97 MM
Total Turns Lock To Lock:3
Type:Hydraulic
Interchange Part Number:92155946, 92161579
Product Description:
Steering gear,also called steering gear, is the most important part of automobile steering system.
Power steering (PAS) or steering assist system helps drivers steer by augmenting steering effort of the steering wheel.
Power steering rack and pinion is the most important part for vehicle swerving and security assurance.
It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction,
thus making it easier to turn the wheels.
Compatible with the following vehicles:
Year Make Model Trim Engine Notes
2006 Pontiac GTO Base Coupe 2-Door 6.0L 5967CC 364Cu. In. V8 GAS OHV Naturally Aspirated Power Steering;BuyAutoParts New
2005 Pontiac GTO Base Coupe 2-Door 6.0L 5967CC 364Cu. In. V8 GAS OHV Naturally Aspirated Power Steering;BuyAutoParts New
2004 Pontiac GTO Base Coupe 2-Door 5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated Power Steering;with 16 mm Inner Tie Rod Threads; with OE # 92184103;BuyAutoParts New
Note:
In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation.
note:
1.In order to avoid the fault caused by the dirt entering the steering oil circuit, the plug on each oil port of steering pump of steering gear shall be opened before connecting the oil pipe, and the oil pipe and plug shall be carefully cleaned and deburred.
2. Turn the steering wheel to the straight ahead position.
3. Clean the mounting bracket of the steering gear and relevant mating surfaces of the steering gear.
4. For the adjustable steering column, use a suitable rope to pass through the space of the cross fork of the steering shaft, hang the steering shaft, and connect the steering shaft and the input shaft of the steering gear.
5. Turn the steering gear to the middle position to align the relevant marks at the input end and output end of the steering gear.
6. Install the steering gear on the mounting base and tighten the fixing bolts.
7. Universal joint or coupling between mounting column and steering gear.
8. For the adjustable steering column, the upper end seal of the steering gear shall not be damaged when the universal joint is installed.
9. Keep the steering wheel in straight ahead position.
10. Put the pitman arm on the steering gear to align the two marks. 10. Tighten the locknut according to the specified torque and rivet (anti loose pit)
| Item Specifics | |
|---|---|
| Brand | SCITOO |
| Type | Steering Rack |
| Manufacturer Part Number | CN154388IE01 |
| OE/OEM Part Number | 92155946, 92161579 |
| Manufacturer Warranty | 1 Year |
| Material | Steel/Aluminum |
| Item Length | 52.37 IN |
| Country/Region of Manufacture | Unknown |
| Performance Part | No |
| Vintage Car Part | No |
| Universal Fitment | No |
| Interchange Part Number | 92161579 |
| Superseded Part Number | 92155946 |
| Rack Type | Hydraulic |
| Placement on Vehicle | Front |
| End To End Length | 50.375 IN |
| Thread Length | 2 IN |
| Distance Between Mounting Holes | 19.125 IN |
| Gasket Or Seal Included | Yes |
| Grade Type | Regular |
| Inlet Line Fitting Diameter | 0.459 IN |
| Inlet Line Fitting Gender | Male |
| Inner Tie Rods Included | Yes |
| Input Shaft Type | Grooved |
| Mounting Brackets Included | No |
| Mounting Hardware Included | No |
| Mounting Hole Quantity | 2 |
| Outer Tie Rods Included | No |
| Outlet Line Fitting Diameter | 0.702 IN |
| Outlet Line Fitting Gender | Male |
| Input Shaft Spline Quantity | 36 |
| Total Turns Lock To Lock | 3 IN |
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
3.Local pick up is not available.
4.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ]
1.We accept multiple payment methods, such as VISA, Master Card, etc..
2.Please do not use the note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 7 days as auction ended or order might be delayed.
We stand behind every product we sell.
All of our brand new items come with a 30-Days money-back or exchange guarantee.
Q: How do I pay for my purchase?
A: MY store accepts VISA, Master Card, etc..
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]
1. We will leave a feedback once we get your payment.
2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
3. If you are satisfied with the product you received, wish you can leave us a feedback.
Shop Category New List Item
Hot Item
Warranty
|
SCITOO Steering Rack & Pinion Fits 2005 Pontiac GTO Base Coupe 2-Door 6.0L V8
Product Description:
Bellows Color:Black Interchange Part Number:92155946, 92161579
Product Description:
Power steering (PAS) or steering assist system helps drivers steer by augmenting steering effort of the steering wheel.
Power steering rack and pinion is the most important part for vehicle swerving and security assurance.
It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction,
thus making it easier to turn the wheels.
Compatible with the following vehicles:
Year Make Model Trim Engine Notes
Note:
In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation.
2. Turn the steering wheel to the straight ahead position.
6. Install the steering gear on the mounting base and tighten the fixing bolts.
7. Universal joint or coupling between mounting column and steering gear.
9. Keep the steering wheel in straight ahead position.
Shipping
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order. Payment
1.We accept multiple payment methods, such as VISA, Master Card, etc.. 2.Please do not use the note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 7 days as auction ended or order might be delayed. Returns
We stand behind every product we sell. Customer Services
Q: How do I pay for my purchase? Feedback
1. We will leave a feedback once we get your payment. Copyright of SCITOO-AutoParts . All rights reserved. |
