Premium Ornamental Steel Driveway Gates
Enhance the security and appearance of your property with our premium ornamental steel driveway gates. Designed to combine strength with timeless elegance, these double-leaf gates create an impressive entrance while delivering long-lasting durability.
1. General Description
Design, manufacture, and supply bespoke double-leaf ornamental steel swing gates featuring a continuous arched top profile, decorative ring detailing to upper and mid rails, solid collar detailing to the upper section and ball-top finials. Gates to be suitable for manual or automated operation.
2. Gate Configuration
Type: Double-leaf swing gate
Opening: Equal split leaves (unless otherwise specified)
Profile: Continuous smooth arch across full span
Operation: Manual or automation-ready
3. Fabrication Details
Main Frame
Outer frame: 50 x 50 x 3mm RHS steel section
50mm x 8mm flat top and middle rails
Fully welded construction
Mitred corners
Welds dressed for clean architectural finish
Vertical Infill Bars
20mm round
Typical clear spacing: 90–110mm
Bars fully welded top and bottom
Decorative Features
Upper arch: 12mm x 6mm round ring detailing welded between verticals
Mid-rail: 12mm x 6mm round ring
Finials: Welded ball-top finials (steel)
Solid collars in the upper half
4. Dimensions
(All dimensions manufactured to site-specific requirements)
The buy it now price of £130 is per running foot
Overall width: As specified
Individual leaf width: 50% of clear opening
Overall height: 6 foot (1830mm) Measured to highest point of arch
Underside ground clearance: Typically 50mm–75mm
Central meeting stile: Reinforced for drop bolt / automation
5. Posts & Support Structure (If Supplied)
Posts: 150 x 150 x 5mm SHS steel
Base plates (if surface mounted): Minimum 10mm thick steel plate
Alternative: Dig-in posts with minimum 600mm embedment (subject to ground conditions)
6. Hinges & Ironmongery
Heavy-duty adjustable weld-on hinges
Rated for gate weight and automation loading
Central drop bolt (manual configuration)
Receiver keep / latch plate
Automation reinforcement plates pre-installed (if required)
7. Surface Treatment & Finish
Preparation
Fabrication debris removed