California Proposition 65: WARNING: This product has not been tested for chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
All parts are new aftermarket replacement parts manufactured by Cougars Unlimited LLC and come with a 1-year limited factory warranty. They are replacement parts to be used to replace the original Ford parts used in there sequencing tail light systems on models that originally came with sequencing tail lights. They are made to plug and play into the original mounting and wiring harness. They are not designed to be used to convert non-sequencing tail light systems to sequencing tail lights.
NOTE: 1964 Thunderbird, this harness replaces the original harness when converting the 1964 Thunderbird to sequencing tail lights when using the T24L) TS64T-400 sequencer Conversion Kit. It is not the same as the original harness and will not work in the original two pin configuration.
You are purchasing
One pair C5SB-13407-AR Tail Light Harness with sockets (Note: Compatible with either LED or Incandescent bulbs)
Application:
1968 Shelby or Eleanor Mustang
1965 1966 Thunderbirds
1964
Thunderbird, this harness replaces the original harness when converting the
1964 Thunderbird to sequencing tail lights when using the T24L) TS64T-400 sequencer
Conversion Kit. It is not the same as the original harness and will not work in the
original configuration.
Replaces: Tail Light Harnesses and sockets
Extensive research has been put into the choosing of proper connectors, gauge of wires, industrial grade connectors and electronic components. They are nice! All aspects of the manufacturing process from design to testing are overseen by an electronic engineer with over 40 years of experience, as a result these units the most robust and reliable units on the market.
Cougars Unlimited LLC manufactures sequential turn signal systems for 1967-1973 Cougar and 1965-1971 Thunderbird and 1968-1970 Mustang Shelby. Since 1981 Cougars Unlimited has been the source for the electronic sequencers used to replace the failure-prone mechanical motor driven turn signal sequencers. Member of the Cougar Club of America since 1981 and a founding member of the Cougar Club of New Mexico.
40 years of service / Thousands sold to satisfied customers
Parts Chart BARGANSPOT (an eBay store) www.barganspot.com
(All parts manufactured by Cougars Unlimited LLC)
1964 Thunderbird
Sequential Turn Signal Conversion kit - T24L) TS-400-64T (LED or Incandescent bulbs)
Flasher, for use with TS-400-64T sequencer - T24F) C4SZ-13350-AR
Conversion Tail Light Harnesses with sockets (Pair, R and L) - S6T) - C5SB-13407-AR
DELUXE Turn Signal Conversion kit and Tail Light Harnesses - T24LD) TS-400-64T and C5SB-13407-AR
1965 Thunderbird
SEQUENCER – ALL MODELS – T1) C5SZ-13A366-AS (LED or Incandescent bulbs)
*INDICATOR RELAY ELECTRONIC - T21-6) C5SZ-13A366-CR (* Required with LED bulbs)
Tail Light Harnesses with sockets (Pair, R and L) - S6T) - C5SB-13407-AR
Stop Lamp Relay - T30) C5SZ-13482-AR (in trunk)
Harness repair pigtails, taillight side - S7) C5SZ-14405-P1
Harness repair pigtails - sequencer side – T31) C5SZ-13H366-CR
1966 Thunderbird
SEQUENCER - EARLY – 66 made before 11/17/1965 - T2) C5SZ-13A366-AS (LED or Incandescent bulbs)
Stop Lamp Relay - EARLY - 66 made before 11/17/1965 - T30) C5SZ-13482-AR (in trunk)
Harness repair pigtails - sequencer side - EARLY – 66 made before 11/17/1965 – T31) C5SZ-13H366-CR
SEQUENCER - LATE – 66 made after 11/17/1965 – T3) C6SZ-13A366-AS (LED or Incandescent bulbs)
Stop Lamp Relay - LATE - 66 made after 11/17/1965 - C10) C7SZ-13482-BR
Harness repair pigtails - sequencer side - LATE – 66 made after 11/17/1965 – C34) C7WY-13H366-AR
*INDICATOR RELAY ELECTRONIC - ALL Models - T21-6) C5SZ-13A366-CR (* Required with LED bulbs)
Tail Light Harnesses with sockets (Pair, R and L) - ALL Models - S6T) - C5SB-13407-AR
Harness repair pigtails - taillight side - ALL Models - S7) C5SZ-14405-P1
1967 Thunderbird
SEQUENCER - EARLY – 67 made before 1/16/1967 – T4) C7SZ-13A366-AS (LED or Incandescent bulbs)
Stop Lamp Relay - EARLY – 67 made before 1/16/1967 - C10) C7SZ-13482-BR
Harness repair pigtails - sequencer side - EARLY – 67 made before 1/16/1967 – C34) C7WY-13H366-AR
SEQUENCER - LATE – 67 made after 1/16/1967 – T5) C7SZ-13A366-BS (LED or Incandescent bulbs)
Harness repair pigtails - sequencer side - LATE – 67 made after 1/16/1967 – C32) C7WY-13H366-BR
*INDICATOR RELAY ELECTRONIC - ALL Models - T21-6) C5SZ-13A366-CR (* Required with LED bulbs)
1968 Thunderbird
SEQUENCER – EARLY MODEL - made before 5/1/1968 – T25) C8SZ-13A366-AS (LED or Incandescent bulbs)
SEQUENCER – LATE MODEL – made after 5/1/1968 - T28) C8SZ-13A366-CS (LED or Incandescent bulbs)
TURN SIGNAL SWITCH - WITH OUT TILT – ALL Models - C42) C8SZ-13341-AR (*LED bulbs only)
TURN SIGNAL SWITCH - WITH TILT – ALL Models - C48) C8SZ-13341-BR (*LED bulbs only)
HARNESS REPAIR KIT - C35) - ALL Models - C8WY-13H366-AR
*INDICATOR RELAY ELECTRONIC – ALL Models - T27) C8SZ-13A366-DR (* Required with LED bulbs)
*NOTE: INDICATOR RELAY ELECTRONIC - When converting to LED bulbs the dash indicator lights will stop working because the original thermal flasher will stop working because LED bulbs do not draw enough current to activate it. To solve this problem Cougars Unlimited LLC makes Electronic Flasher can replacements. They work with either LED or Incandescent bulbs.
*NOTE: TURN SIGNAL SWITCH – All turn signal switches sold by Cougars Unlimited LLC are for use with LED bulbs only. The reason for this is applicable vehicles are now over 50 years old the current that sequencing systems draw have greatly increased over time. This is because of the original wiring harnesses and connectors are deteriorating increasing the resistance. Higher the resistance the higher the current draw across the switch. The current is now so high on most vehicles that it exceeds the ratting of the switches, causing them to prematurely fail. The only solution is to convert to LED bulbs, they draw far less current. On vehicles that have converted to LED the turn signal switches are not failing. The only other solution is to replace the complete wiring harness which is expensive, and in most cases not possible.
When converting to LED bulbs Cougars Unlimited LLC strongly recommends using WCCC1157RPR (Red for rear) LED bulbs and WCCC1157YPR (Yellow for front) LED bulbs. They have a built in current limiting diode. This stops the reverse current flow that causes sequential turn signal systems to malfunction.