 |
Why Do You Need It● Under the long-term normal wear of the engine, the timing belt and pulley shall be replaced regularly, and the ignition timing shall be adjusted again in case of cylinder pressure drop. The ignition timing will directly affect the normal operation of the engine, and in serious cases, it will cause the engine to fail to start. ● The early or late ignition timing directly affects the normal operation of the engine. In severe cases, the engine will not start. If the engine accelerates too early, it will make a metallic knock like "rattle". The starting resistance is large, the engine is difficult to rotate, the power is reduced, the idle speed is unstable, and the engine shakes. If the ignition is too late, it will lead to starting difficulties or insufficient power, which will cause fuel consumption and accelerated engine wear |
 |
Ignition Timing Tool The ignition timing light can visually detect the ignition timing on the engine flywheel or pulley so that proper adjustments can be made. It can detect the automobile burst suppression control system and vacuum advance angle control system. The advance angle changes with the speed. Adopts impact-resistant ABS housing, and the working voltage is 12 V. The ignition timing gun is suitable for automobiles, motorcycles and all two-stroke or four-stroke gasoline engines. Reverse polarity protection and overload protection It has reverse polarity protection to prevent the user from damaging the device or affecting the car or battery in the event of misoperation. During the working process, if the current or load is too large, the timing light will automatically disconnect the current to protect the battery and the device. |
 |
Widely ApplicationsThis engine timing light speed up to 1000rpm, can be easily operated on 12V ignition system, suitable for cars, motorcycles, ATVs, RVs, boats and all two-stroke or four-stroke gasoline engines. |
 |
| Detection And Adjustment Of Ignition Timing If adjustment is required, loosen the distributor screw, align the timing pulley with the ignition timing, then rotate the distributor until the scale mark is at the specified value, and finally lock the distributor screw (if the distributor housing is rotated in the direction of distributor rotation, the ignition will be delayed; if the distributor housing is rotated in the direction of counter distributor rotation, the ignition will be advanced) |
 |
Extension WireSay goodbye to the limitation of the range of activities due to short wires.The wires connected to the positive and negative power clips can be torn apart separately to expand the movable range.The wires are wrapped with insulating rubber to prevent accidental leakage/electric shock. |
 |
 |  |  |  |
 |  |  |  |
 |  |  |  |
 |  |  |  |
