Stainless steel V2A railing railing configurator attached/mounted
Item description
RAILING RAILING - CONFIGURATOR
HEIGHT:
900mm (posts incl. 4 crossbar holders)
1000mm (posts incl. 5 / 6 crossbar holder)
- Material: Stainless steel V2A
- Surface: ground K320
COMPONENTS:
POST 42.4 x 2.0 mm:
- incl. 4 / 5 / 6 crossbar holders for tube 12.0 mm
- The holes for the crossbar holders are included M5 thread rivet nuts equipped, which ensures the stability of the structure and safety when using the railing
- incl. Handrail support 42.4 mm - support plate with joint - glued in
- The handrail tube should be installed with an M5x12 mm screw - available as a variant
- we recommend for fastening M10 concrete anchor (available as variant) or Threaded rod M10 (available as variant) + chemical anchor to use.
⇒ FLOOR MOUNTING - put on
- incl. Bottom flange Ø100 mm welded, with 2 holes Ø11 mm
- incl. Cover rosette 103 mm
- incl. Wall anchor with plate Ø100mm
- incl. Wall distance 50mm
- incl. 2 holes Ø10.5mm
As a variant you will also find the posts open at the top - without pipe support and without crossbar holder
FILLER STICK = round tube 12.0 x 1.5 mm / 100 - 300 cm
HANDRAIL = tube 42.4 x 2.0 mm / 100 - 300 cm
You can also find the following variants ACCESSORIES for the handrail tube and the filler rod tubes:
⇒ Wall flanges
⇒ straight connectors
⇒ 90 degree connector / joint connector
⇒ End caps
General information:
- material: Stainless steel V2A, also known as AISI 304, is an alloy of chromium and nickel known for its corrosion resistance and durability.
- Diameter of posts and handrail tubes: 42.4x2.0mm
- Diameter of the filling tubes: 12.0x1.5mm
- surface: ground K320
Use:
- Architectural: Railing railings made of V2A stainless steel are used in various architectural environments, including residential, commercial and industrial areas.
- Security : They serve as a safety precaution on stairs, balconies, patios, walkways, ramps and other elevated areas to prevent falls.
- Design element: These railings contribute to the aesthetic design of indoor and outdoor spaces and improve the overall appearance of a building.
Areas of application:
Advantages - Summary:
- Corrosion resistance: V2A stainless steel is extremely resistant to corrosion, rust and atmospheric influences, making it ideal for use outdoors and in damp environments.
- longevity: These railings are extremely durable and have a long lifespan, making them a cost-effective solution over time.
- Easy-care: Stainless steel V2A railings require minimal maintenance and are easy to clean and maintain.
- Modern design: The contemporary look of stainless steel gives the railings a modern and elegant appearance that fits well with various architectural styles.
Purchase Processing
After your purchase, you will automatically receive an email from us with all the important information within 2 hours. Please check the information provided or Your delivery address.
Otherwise, you can simply use the “Pay Now” button, which you will find in the item description of the purchased item, to briefly go through the purchase process, where you will then automatically be guided to the payment information.
Notice
We deliver the goods via DHL, DPD or Raben Spedition.
Important
.
tags
Endkappe Edelstahl Geländer Rostfrei Rohr 12,0
IMPORTANT INFORMATION ABOUT PLANNING AND CONSTRUCTING YOUR RAILINGS:
When installing railings, it is important to comply with building regulations, which vary from country to country.
Since the building owner is responsible for compliance, information about the respective state building regulations must be obtained from the responsible building authority or to get architects.
Our railing systems are only suitable for private use - residential buildings, up to two apartments.
A minimum railing height of 90 cm must be maintained.
If small children could use up the railing, avoid filling it with horizontal bars to prevent them from climbing or stepping over it.
Otherwise, the handrail must be bent inwards by at least 150mm.
Alternatively, filling with glass panes, metal sheets or vertical filler rods is possible.
When positioning, we recommend spacing the posts evenly with a post spacing of no more than 1 m to avoid any bending forces that may occur when the railing is under heavy load.
When installing in the ground, the post must be moved at least 100 mm inwards.
For mounting the posts on the cheeks, we recommend a distance from the wall of 30 to a maximum of 50 mm. For an L / U-shaped railing, the distance of the first post from the outside corner should be 150 - 250 mm.
The post should be mounted on hard ground (concrete, steel beams, wood, wall), loose ground, loose floors, e.g. screed made of wooden floorboards, are usually not enough.
An approved dowel technology should also be used for fastening, e.g. concrete anchors or threaded rods can be used in combination with composite anchor cassettes or chemical anchors.
The railing can be additionally stabilized by using a wall flange.
Ravens
