20Amp Variac Transformer Variable 0-130V AC Voltage Regulator Metered 2000VA Red

20A Variable Transformer Automatic Voltage Regulator 2000VA Voltage

Regulator

GYD59R3SUSYB8(14).jpg   

Specification
Model: TDGC2-2KM
Shape: Annular
Material: Iron, Copper
Color: Red
Process: Vacuum Dipping Paint
Power Source: Corded Electric
Mounting Type: Floor Mount
Maximum Current: 20A
Output Voltage: AC 0-130V/60Hz
Input Voltage: AC 110V 60 Hz.
Maximum Rated Power: 2000 VA
Plug Standard: American Standard
Power Cord Length: 1.5m/4.92ft
Assembly Required: Yes
Gross Weight: 8.3kg/ 18.3 lbs 
Product Size:  17*20*18cm/ 6.69*7.87*7.09 in
Package Size:  27*21*23.5cm/0.63*8.27*9.25in

 

Package Included
1 * Variable Transformer
6 * Fuses
1 * English Instruction
1 *  Braking Resistor   
 

Details 

2000 VA Power Provides More Powerful Power for the Voltage Regulator, Thus Ensuring More Stable and Efficient Voltage Output The Output Voltage of This New Variable Transformer Can Be Adjusted from 0 to 130V AC. It Can Meet the Power Demand of Most EquipmentThe Fuselage with the Size of 6.69*7.87*7.09 Inches Has a Small Volume, Which Is Convenient for Storage and Carrying out to Work

GYD59R3SUSYB8(5).jpgGYD59R3SUSYB8(13).jpg

Application
It is widely used for motor speed control, label printing machines, labs, test for railroad switching, power supplies, satellite, equipment, telecommunication equipment, etc.

 

Key Features
High-quality Material: The voltage regulator adopts an all-copper coil, which makes the operation more stable. The high-quality iron shell has high hardness and strong pressure resistance, which can effectively extend the service life of the product.

 

High Security: Limit current protection, thermal protection, voltage overload protection, short circuit protection and grounding port can provide more stable operation and higher security.

 

Efficient Heat Dissipation: The through-body thermal grid design makes the machine easier to cool, thus ensuring the smooth and safe operation of the machine.

Notes
1.This product is only for indoor use. Please do not operate under conditions that may cause electric shock and fire. Please do not operate in humid environment or near flammable substances.
2.Please note that the wave value (when first opened) of most devices is much higher than the working current rating. For example, a motor with a rated current of 10 amperes may have a surge of more than 20 amperes, so you need a 20-ampere transformer.
3.Please check the regulator regularly with a carbon brush and ensure that the brush and contact parts do not exceed the width of two wires.
4.Please check the insulation resistance regularly. The insulation resistance between the coil and the base should not be less than 0.08inch.
5.Before powering on, connect the ground wire to the regulator housing and point the handwheel to "zero".
6.The lower the output voltage regulation, the smaller the output power and the smaller the load power.
7.After the power cord is plugged in, do not touch the metal connector and heating wire.
8.Please unplug the power plug before the replaced electric wire touches the metal connector.
9.Products with electrical plugs are designed for use in the US. Please check compatibility before purchasing.
10.Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
11.Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
PushAuction


On May 25, 2026 at 20:41:46 PDT, seller added the following information:

Datacaciques