• Excellent Brightness: Each light comes with 6PCS high intensity 2835 SMD LED, outputs excellent bright 120LM light for perfect marker light.
  • Awesome Seal: Decently sealed at both front lens and back wire lead. Compared with other brands, our back wire lead is added proper glue to make it completely seal without affecting the surface mount.
  • Widely Used: Ideal for most 12V trailer, buses, trucks, trailers, lorries, RV, boat as led marker light clearance light indicator Light.
  • 12V 3.8" White Smoked Side Marker Clearance Lights LED 6 for Truck Trailer 10x

    Excellent Brightness: Each light comes with 6PCS high intensity 2835 SMD LED, outputs excellent bright 120LM light for perfect marker light.

    Awesome Seal: Decently sealed at both front lens and back wire lead. Compared with other brands, our back wire lead is added proper glue to make it completely seal without affecting the surface mount.

    Widely Used: Ideal for most 12V trailer, buses, trucks, trailers, lorries, RV, boat as led marker light clearance light indicator Light.

    Simple Installation: 2 wire connection, yellow/red for positive, black for negative. 3 steps of light mounting: Mark and drill holes according to the foam tape base provided; Peel and stick the foam tape to the light; Run through the wire lead to the center hole and use bolts and nuts to fix 2 sides. Center hole might not be necessary if use some washer under the foam tape base when fixing the two sides.

    Package Include: 10 pack of white side marker light, include a hardware pack and foam tape base.

     

    Description:

    Item Type: Tail Light Assembly

    Special Features: Side marker &clearance lamp

    Material: ABS

    Light Source: LED

    LED quantity: 6 x light emitting diodes

    Lights Color: White

    Size: 3.74 x0.79 x 0.32 in/ 95 x 20 x 8 mm

    Holes spacer: 3.26 in/83 mm

    Lead cable length: 7.60 in /193mm

    Voltage: DC 12V

    Suitable for most of buses, trucks, trailers, and lorries etc.

     

    Package Included:

     

    10x Side Marker Lights(White)

    20 x Screws

    10 xGasket


    Item Specifics
    To Fit Side Indicator
    Light Color Smoke/Tinted
    Type LED Side Marker Clearance Lights
    Item Type Tail Light Assembly
    Material ABS
    Light Source LED
    LED quantity 6 x light emitting diodes
    Placement on Vehicle Front Rear Left Right
    Brand AUXITO
    Fitment Type Direct Replacement
    Lights Color White
    Size 3.74 x0.79 x 0.32 in/ 95 x 20 x 8 mm
    Holes spacer 3.26 in/83 mm
    Lead cable length 7.60 in /193mm
    Suitable For most of buses, trucks, trailers, and lorries etc
    Fitment For Pickup,truck trailer,boat,Lorry,Van,caravan
    Waterproof IP67
    Number of Bulbs 10
    Manufacturer Warranty 2 Years
    Voltage DC 12V
    Lighting Technology LED
    Features CANbus Compatible
    Universal Fitment Yes
    Bulb Life Hours Up to 5,000 Hours
    Universal Fitment Yes
    Bulb Life Hours Up to 5,000 Hours

    Payment

    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.

    (2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (3). Before payment,Please keep the consistency of Paypal address and ebay address.

    (4). Quantity orders are welcome!

    Shipping

    (1) All items will be shipped in 24 hours after receiving your payment .

    (2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    Returns

    (1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    (2). All returned items should be in the original packaging , return tracking information should be provided ..

    (3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .

    Contact Us

    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.

    FAQ

    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.

    Picture
    12V 3.8" White Smoked Side Marker Clearance Lights LED 6 for Truck Trailer 10x

    Excellent Brightness: Each light comes with 6PCS high intensity 2835 SMD LED, outputs excellent bright 120LM light for perfect marker light.

    Awesome Seal: Decently sealed at both front lens and back wire lead. Compared with other brands, our back wire lead is added proper glue to make it completely seal without affecting the surface mount.

    Widely Used: Ideal for most 12V trailer, buses, trucks, trailers, lorries, RV, boat as led marker light clearance light indicator Light.

    Simple Installation: 2 wire connection, yellow/red for positive, black for negative. 3 steps of light mounting: Mark and drill holes according to the foam tape base provided; Peel and stick the foam tape to the light; Run through the wire lead to the center hole and use bolts and nuts to fix 2 sides. Center hole might not be necessary if use some washer under the foam tape base when fixing the two sides.

    Package Include: 10 pack of white side marker light, include a hardware pack and foam tape base.

     

    Description:

    Item Type: Tail Light Assembly

    Special Features: Side marker &clearance lamp

    Material: ABS

    Light Source: LED

    LED quantity: 6 x light emitting diodes

    Lights Color: White

    Size: 3.74 x0.79 x 0.32 in/ 95 x 20 x 8 mm

    Holes spacer: 3.26 in/83 mm

    Lead cable length: 7.60 in /193mm

    Voltage: DC 12V

    Suitable for most of buses, trucks, trailers, and lorries etc.

     

    Package Included:

     

    10x Side Marker Lights(White)

    20 x Screws

    10 xGasket

    Item Specifics
    To Fit :Side Indicator
    Light Color :Smoke/Tinted
    Type :LED Side Marker Clearance Lights
    Item Type :Tail Light Assembly
    Material :ABS
    Light Source :LED
    LED quantity :6 x light emitting diodes
    Placement on Vehicle :Front Rear Left Right
    Brand :AUXITO
    Fitment Type :Direct Replacement
    Lights Color :White
    Size :3.74 x0.79 x 0.32 in/ 95 x 20 x 8 mm
    Holes spacer :3.26 in/83 mm
    Lead cable length :7.60 in /193mm
    Suitable For :most of buses, trucks, trailers, and lorries etc
    Fitment :For Pickup,truck trailer,boat,Lorry,Van,caravan
    Waterproof :IP67
    Number of Bulbs :10
    Manufacturer Warranty :2 Years
    Voltage :DC 12V
    Lighting Technology :LED
    Features :CANbus Compatible
    Universal Fitment :Yes
    Bulb Life Hours :Up to 5,000 Hours
    Universal Fitment :Yes
    Bulb Life Hours :Up to 5,000 Hours


    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.

    (2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (3). Before payment,Please keep the consistency of Paypal address and ebay address.

    (4). Quantity orders are welcome!

    (1) All items will be shipped in 24 hours after receiving your payment .

    (2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    (2). All returned items should be in the original packaging , return tracking information should be provided ..

    (3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .

    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.

    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.


    All rights reserved.



    On May 23, 2026 at 22:49:42 PDT, seller added the following information:

    Datacaciques