This item has not been tested, so it is being sold as is for parts, repair, restoration or display only. Reproducer measures approximately 2 3/4 inches long by 3/4 of an inch wide, excluding the rear wood casting. Very dirty and dusty throughout from age and use and could use a good cleaning, especially on the front area of bruising on the plastic center diaphragm that's approximately 1/2 an inch long by 1/2 an inch tall. Heavy to very heavy scratching, scuffing and wear, pitting, plating wear, and general wear throughout from age and use. There are some areas of moderate surface rusting in various places throughout the exterior surface, especially along the exterior edges and the bottom casting throughout. The wood on the backside shows heavy to very heavy scratching, scuffing and wear, general wear, and finish wear throughout from age and use. The front gasket of the reproducer is dried out significantly from age and will need to be replaced. The unit appears to be complete with all of its parts, but please inspect the pictures carefully to be sure. See pictures for a better idea of condition.