• Features:
  • LH (Driver Side) FRONT.
  • Easy install,direct replacement.
  • Power Window Switch.
  • Door Lock Switch.
  • Better stability with longer service life.
  •  It has undergone simulation and endurance testing to ensure proper fit and performance.
  •  
  • Specification:
  • Color: Black
  • To Control: Window
  • Material: ABS Plastic
  • Voltage: DC 12V
  • Plug Pin Number: 11 Pins
  • Auto:2 (driver's side+passenger's side)
  • Switch Type: Push Pull Switch
  • Placement of Vehicle: Front, Left
  • Fitment Type: Direct Replacement
  •  
  • Master Power Window Switch Driver Side Left for 2011-13 Dodge Durango Jeep Grand

    Features:

    LH (Driver Side) FRONT.

    Easy install,direct replacement.

    Power Window Switch.

    Door Lock Switch.

    Better stability with longer service life.

     It has undergone simulation and endurance testing to ensure proper fit and performance.

     

    Specification:

    Color: Black

    To Control: Window

    Material: ABS Plastic

    Voltage: DC 12V

    Plug Pin Number: 11 Pins

    Auto:2 (driver's side+passenger's side)

    Switch Type: Push Pull Switch

    Placement of Vehicle: Front, Left

    Fitment Type: Direct Replacement

     

    OE Number: 68086693AC,68086693AE, 68086693AD 68030823AB,68030823AC,68030823AD,68030823AE
      

     

    Fit For:

    2011-2013 Jeep Grand Cherokee

    2011-2013 Dodge DURANGO

     

    Package included:

    1x Power Window Switch

     

    Related Repair Advice:    

    • Step 1 – Find the Problem
      If the window on only one side is not working, it is most likely that the problem is a nonfunctional switch. Also, there could be a problem in the window’s motor, or the wiring leading from the switch to the motor could be faulty. In this case, it is important to inspect the entire apparatus thoroughly to identify the exact problem. There can be many reasons why a power window doesn’t work. The first step is to identify the cause of the malfunction.
    • Step 2 – Examine the Switch
      The switches for the passenger windows are wired to the switches on the driver’s side. If there is a problem in the switches of the passenger windows, the problem could be with either the switches on the passenger windows or the ones on the driver’s side.
    • Step 3 – Removing the Switch
      There are a total of 4 tabs on each of the window switches. To remove the switch, each of these four tabs has to be released. These tabs are extremely sensitive, and a lot of caution should be exercised while releasing them so that they do not break. Use a flat-tipped screwdriver and slide it under two of the tabs. With a quick motion, release them.
    • Step 4 – Check If the Switch Works
      Use the multimeter to check the contacts of the switches. If the resistance of the switches is high, it may be because dirt has settled on them. Simply cleaning the contacts can therefore solve your problem. Once you have cleaned the contacts, replace the switch onto the assembly by reinserting the tabs.
    • Step 5 – Re-examine the Switch
      Once you have reinstalled the switch back into the car, check whether it is able to function normally again. Push the switch, and observe if it can make the windows roll. If the windows are working, it implies that the switch is functioning properly. However, if the same problem persists, the switch may have to be replaced.
    • Step 6 – Installing a New Switch
      Before you install a new switch, check whether the contacts are clean. The contacts should be dirt free and should not have kind of debris on it. Also make sure that the contacts are not rusted. Once you have inspected the new switch, remove the old switch and insert the new one in its place. Make sure you fasten the tabs properly. Roll the windows and check once again. If your window is still not working, the problem could be faulty wiring. This will require further checking and correcting that is perhaps done best by a car mechanic.

    Item Specifics
    Color Black
    Manufacturer Part Number CCKG-Durango-11-13-11PIN
    To Control Window
    Brand Unbranded
    Fitment Type Direct Replacement
    Manufacturer Warranty 2 Years
    Mounting Hardware Included Yes
    Type Push Pull Switch
    Features Durable
    Fitment 1 For 2011-2013 Jeep Grand Cherokee
    Fitment 2 For 2011-2013 Dodge DURANGO
    OE/OEM Part Number 68086693AC,68086693AE, 68086693AD
    Interchange Part Number 68030823AB,68030823AC,68030823AD,68030823AE
    Features Durable
    Fitment 1 For 2011-2013 Jeep Grand Cherokee
    Fitment 2 For 2011-2013 Dodge DURANGO
    OE/OEM Part Number 68086693AC,68086693AE, 68086693AD
    Interchange Part Number 68030823AB,68030823AC,68030823AD,68030823AE

    Payment

    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.

    (2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (3). Before payment,Please keep the consistency of Paypal address and ebay address.

    (4). Quantity orders are welcome!

    Shipping

    (1) All items will be shipped in 24 hours after receiving your payment .

    (2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    Returns

    (1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    (2). All returned items should be in the original packaging , return tracking information should be provided ..

    (3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .

    Contact Us

    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.

    FAQ

    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.

    Picture
    Master Power Window Switch Driver Side Left for 2011-13 Dodge Durango Jeep Grand

    Features:

    LH (Driver Side) FRONT.

    Easy install,direct replacement.

    Power Window Switch.

    Door Lock Switch.

    Better stability with longer service life.

     It has undergone simulation and endurance testing to ensure proper fit and performance.

     

    Specification:

    Color: Black

    To Control: Window

    Material: ABS Plastic

    Voltage: DC 12V

    Plug Pin Number: 11 Pins

    Auto:2 (driver's side+passenger's side)

    Switch Type: Push Pull Switch

    Placement of Vehicle: Front, Left

    Fitment Type: Direct Replacement

     

    OE Number: 68086693AC,68086693AE, 68086693AD 68030823AB,68030823AC,68030823AD,68030823AE
      

     

    Fit For:

    2011-2013 Jeep Grand Cherokee

    2011-2013 Dodge DURANGO

     

    Package included:

    1x Power Window Switch

     

    Related Repair Advice:    

    • Step 1 – Find the Problem
      If the window on only one side is not working, it is most likely that the problem is a nonfunctional switch. Also, there could be a problem in the window’s motor, or the wiring leading from the switch to the motor could be faulty. In this case, it is important to inspect the entire apparatus thoroughly to identify the exact problem. There can be many reasons why a power window doesn’t work. The first step is to identify the cause of the malfunction.
    • Step 2 – Examine the Switch
      The switches for the passenger windows are wired to the switches on the driver’s side. If there is a problem in the switches of the passenger windows, the problem could be with either the switches on the passenger windows or the ones on the driver’s side.
    • Step 3 – Removing the Switch
      There are a total of 4 tabs on each of the window switches. To remove the switch, each of these four tabs has to be released. These tabs are extremely sensitive, and a lot of caution should be exercised while releasing them so that they do not break. Use a flat-tipped screwdriver and slide it under two of the tabs. With a quick motion, release them.
    • Step 4 – Check If the Switch Works
      Use the multimeter to check the contacts of the switches. If the resistance of the switches is high, it may be because dirt has settled on them. Simply cleaning the contacts can therefore solve your problem. Once you have cleaned the contacts, replace the switch onto the assembly by reinserting the tabs.
    • Step 5 – Re-examine the Switch
      Once you have reinstalled the switch back into the car, check whether it is able to function normally again. Push the switch, and observe if it can make the windows roll. If the windows are working, it implies that the switch is functioning properly. However, if the same problem persists, the switch may have to be replaced.
    • Step 6 – Installing a New Switch
      Before you install a new switch, check whether the contacts are clean. The contacts should be dirt free and should not have kind of debris on it. Also make sure that the contacts are not rusted. Once you have inspected the new switch, remove the old switch and insert the new one in its place. Make sure you fasten the tabs properly. Roll the windows and check once again. If your window is still not working, the problem could be faulty wiring. This will require further checking and correcting that is perhaps done best by a car mechanic.
    Item Specifics
    Color :Black
    Manufacturer Part Number :CCKG-Durango-11-13-11PIN
    To Control :Window
    Brand :Unbranded
    Fitment Type :Direct Replacement
    Manufacturer Warranty :2 Years
    Mounting Hardware Included :Yes
    Type :Push Pull Switch
    Features :Durable
    Fitment 1 :For 2011-2013 Jeep Grand Cherokee
    Fitment 2 :For 2011-2013 Dodge DURANGO
    OE/OEM Part Number :68086693AC,68086693AE, 68086693AD
    Interchange Part Number :68030823AB,68030823AC,68030823AD,68030823AE
    Features :Durable
    Fitment 1 :For 2011-2013 Jeep Grand Cherokee
    Fitment 2 :For 2011-2013 Dodge DURANGO
    OE/OEM Part Number :68086693AC,68086693AE, 68086693AD
    Interchange Part Number :68030823AB,68030823AC,68030823AD,68030823AE



    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.

    (2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (3). Before payment,Please keep the consistency of Paypal address and ebay address.

    (4). Quantity orders are welcome!

    (1) All items will be shipped in 24 hours after receiving your payment .

    (2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    (2). All returned items should be in the original packaging , return tracking information should be provided ..

    (3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .

    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.

    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.


    All rights reserved.



    On May 22, 2026 at 21:31:40 PDT, seller added the following information:

    Datacaciques