Notice:

Pick up service is not available.

Introduction:

Stay warm in the winter storm with Maxpeedingrods Air Heaters;
No engine start, you can enjoy warm in winter. And it's suitable for longer periods of operation with low fuel and power consumption.

Application 

Compatible for Motorhomes, Campervans, Caravans (also known as Travel Trailers and Camper Trailers), Fifth-wheel Trailers, Popup Campers and Truck Campers, Small Truck, Big Truck, Light Truck, Heavy Truck, Pickup, Van,Bus,Car,SUV, Boat, Forklift, Electric Tricycle, Engineering Vehicle, Yacht and so on.

Specifications:
Car Air Conditioning Type: Heating
Fuel Type: Diesel Only
Switch Type: LCD Switch, Remote controller
Power: 1KW-8KW Adjustable
Rated Voltage: 12V/24V (optional)
Fuel Consumption(L/H): 0.16-0.70
Working Temperature of the Heater: -40℃~+50℃
Working Temperature of the Oil pump: -40℃~+40℃
Item Size: 43*8*32 cm
Fuel Tank: 10L

Features:

1. WIDE RANGE OF APPLICATIONS
The diesel heater can be used for truck, boat, car trailer, motorhomes, touring car, camper vans, caravans and so on.
2. EASY TO OPERATE
Easy to install , remove and maintain. The vehicle can be preheated by the remote control to eliminate the frost on the windows.
3. DURABLE ALUMINUM BODY
The combustion chamber, the base and the heat-dissipating scale are all sand-blasted aluminum parts. It is integrally formed, with the heat dissipation fast and uniform.
4. FAST HEATING & LOW EMISSIONS
Volatile technology, the ceramic Igniter heats the fuel to evaporate into a gas and burn it quickly and fully. Low emission, low fuel and power consumption, suitable for long running.
5. ENERGY SAVING
The optimized frequency conversion ECU can accurately control the injection frequency of the oil pump and the intake air amount to extend the service life of the heater.
6. REDUCED NOISE
Effectively reduce noise through blower speed control, the speed of the fan is controlled linearly with the increasing power, and the metering fuel pump adopts an improved low frequency pulse with low vibration.
7. KEEP CONSTANT TEMPERATURE 
The intelligent overheating sensor can prevent the heater from running dry, and the LCD dynamic display will clearly show the running state of the machine.

Important Installation Note:

1. SWITCH OFF heater before refuelling!
2. DO NOT cut off electric power during operation.
3. DO NOT use heater in closed and/or unventilated places.
4. DO NOT start the heater with a cigarette lighter.
5. Place exhaust outlet outside to prevent ingress of exhaust fumes.
6. Seal all gaps between mounting plate and car body.
7. KEEP AWAY from fuel tanks, compression tanks, fire extinguisher, clothes, and other flammable objects.
(More installation details included in the instruction manual.)
 

Packag included:

1 x Parking Heater
1 x Fuel Tank 10L
1 x Hot air Outlet Tubing (76mm)
1 x Air inlet pipe
1 x Exhaust Pipe
1 x LCD Switch
1 x Remote Controller
1 x Silencer
1 x Power Harness
1 x Wind Head
1 x Fuel Pump
1 x Fuel Hose
1 x Fuel Filter
1 x Air Filter
1 x Fixed Plate
1 x Fuel Pump Clamp
1 x Fixed Accessories Set as Picture Shows
1 x Manual
1 x Fuel Extractor
1 x Glove

Notice:
1. RISK OF FIRE, BURN, EXPLOSION AND POISONING
- TURN OFF the heater before refuelling.
- DO NOT touch the heater while it is in use to avoid scalding. 
- DO NOT use the heater in confined or poorly ventilated areas.
- DO NOT blow hot air directly at people, animals or objects sensitive to temperature.
- Make sure that the air intake and exhaust ports are clear of any obstruction.
- Keep children, inflammables and explosives away.
- Operate the heater only when the installation is completed.
- Route the exhaust outlet to the outdoors to prevent intake of exhaust fumes and carbon monoxide poisoning. 
2 .DO NOT disconnect the power during operation.
3. DO NOT use a cigarette lighter to start the heater.
4. Seal any gaps between the mounting plate and the vehicle's body.
5. To avoid accidents, do not leave the heater unattended for at least 10 minutes after the first start up.
6. DANGER：To avoid injury from moving parts, shut off the equipment before removing this cover.