A :Obturation Gun
1.
It can be heated to 230℃ in 15S,which can melt all kinds of gutta
percha.
2.
Large battery capacity ,which can use long time.
3.
Wireless 3D filling design.
4.
Comfortable holding and easy to operate.
5.
Gun needle screw design can effectively prevent excessive glue.
6.
Auto idle Power Saving Mode,the device will turn off automatically after 15m of
non-use.
7.
Accurate temperature-control and thermal protector cap can prevent accidental
scald.
B :Obturation Pen
1.
The heater can be heated to 230℃ in 5S.
2.
Option temperature:160、180、200、230℃.
3.
Large capacity battery ,double battery charging and spare.
4.
Holding comfortable,easy to use.
5.
Wireless design,reduce wrist fatigue.
6.
Own heating protection function,the heating maximum time of heater is 10S,more
efficient and secure.
7.
Heating key 360°stereo operation,accurate top control,3D filling more
thoroughly.
Technical parameters：
Obturation Gun：
Li-ion
chargeable Battery：3.7V 2200mAh
Heating
time：15s to 230℃
Working
temperature ：160 ℃、180 ℃、200
℃、230 ℃
Input
voltage：100V-240V AC
Output
voltage：DC 5V,2A
Gun
needle size：23G
Operating
time：continuous
use 1.5H
Obturation Pen：
Li-ion
chargeable Battery：3.7V 2600mAh
Heating
time：5s
Working
temperature ：160 ℃、180 ℃、200
℃、230 ℃
Input
voltage：100V-240V AC
Output
voltage：DC 5V,2A
Heat
plunger size：F、FM、M
Operating
time：continuous
use 1.5H
Packing List:
Obturation
Gun 1 PC
Adapter
1 PC
Charging
Base 1 PC
Multi-tool
1 PC
Handpiece
prop 1 PC
Needles
3PCS
Thermal
Protector 2PCS
Prevent
overflow ring 10PCS
Plunger
1PC
Cleaning
Brush 1PC
Obturation
pen 1PC
Charging
base 1PC
Adopter
1PC
Batteries
2PC
Wrench
1PC
Pen
Tips (Type 1*F/1*FM/1*M) 3PCS
&
Westcode
Model: Op-fill can be heat to 200 º C in 3s, can be
melting all kinds of Gutta percha.It support the vertical compaction of Gutta
percha for the root canal filling. It is intended exclusively for use by
trained dentiet only in clinic or laboratory.
Safety
caution:
The temperature of tip is very high during the surgery , in order to prevent
from being burned, please avoid it directly contact to the soft tissue.
Specification:
Charging
system
Operating Voltage DC.3.6V
Adaptor Input: AC 100V/220V 50-60HZ
Power: 10w
Charging time 4 hours
Packing size: 165*125*38mm
Usage:
Heat: Press the button to heat the tip, the Led indicator light red.The tip can
reach working temperature within 3 second.
Charge:Put the obturation pen onto the charging base, the LED indicator light
blue.The unit should be continuous charging more than 8 hours from low voltage
to full charge.
Package includes:
Charging Base-----1 PC
Obturation Pen-----1 PC
Pen Tip -----2PCS
&
Tooth Gum Cutter A-BLADE Ⅱ
Feature：
1. Design ingenious , Shape beautiful , Conform to the human body engineering
2. Wireless mode , Operation ,flexible, convenient
3. Rapid heating , highest temperature of 260º C
4. High-capacity can be charged Nickel cadmium battery, charging time 3 hours
5. Fever needle can be sterilized by high temperature and high pressure ,
repeated use.
Technical Paraments:
1. Charger voltage: AC110V or 220V 50/60HZ
2. Battery: 1.2V 2400mAh
3. Power2.5W
4. Weight: about 305g
Packing List:
1x main unit
4x tips
1x Box
1x English manual
Charging：
1.First,charge
the instrument by connecting the charging station to a mains power socket
2. Plug the handipece into the socket in the charging station . While the
instrument is charging,the LED lights up on the handpiece.
Use:
Fit
a cutting tip onto the handpiece.Make sure that the angle of the tip is
pointing in the opposite direction to the operating button,This makes work
easier.
Important:
Never
bend the tip while it is still in the handpiece.
1.Insert the cutting tip into the cavity while it is cold (without pressing the
operating button).The gutta-percha point to be cut off must be encircled by the
loop of the cutting tip.
2. As soon as the cutting tip is located directly on the canal access,press
the operating button.
3.The
tip heats up in seconds and the gutta-percha point can be quickly and cleanly
removed.
4.After the point has been cut off ,release the operating button. The cutting
tip immediately cools down and can be removed from the patient＇s mouth .The operating button is a “contact
button” which only switches the button is released,the instrument switches off.
5.Remove the cutting tip from the handpiece after use.
Attention:Please don＇t continue
to press the button more than 30 seconds.
&
Buchanan Hand Pluggers:
Buchanan Hand Pluggers Featuring both a tapered nickel-titanium end and a
stainless steel end, Buchanan Hand Pluggers can be used in any common
obturation technique, including warm and cold condensation. The pluggers are
also ideal for backfilling canals. Use the NiTi end for finishing off
condensation procedures in even the most radically curved canals. Either end
may condense and control the movement of gutta percha under pressure. In
addition, the Buchanan Hand Pluggers are fabricated of the highest grade
materials for excellent durability and sterilization.
Part Numbers:
Number Description
974-0058 Buchanan Hand Plugger Size #1 Stainless tip size .02/80 NiTi Tip
Size.03/.40 Red Tip
974-0059 Buchanan Hand Plugger Size #2 Stainless tip size .02/.1.3 NiTi Tip
Size.03/.70 Blue Tip
974-0060 Buchanan Hand Plugger Size #0 Stainless tip size .02/.75 NiTi Tip Size
.03/.25 Yellow Tip
|
Type
|
Niti End
|
Stainless Steel end
|
|
Size
|
Taper
|
Size
|
Taper
|
|
#0
|
25mm
|
03
|
75mm
|
02
|
|
#1
|
40mm
|
03
|
80mm
|
02
|
|
#2
|
70mm
|
03
|
1.3mm
|
02
|
&
Description:
These
tips are used for preparing Root Canal Treatment.
1.
Engine Use
2.
Length: 25mm
3.With
preciseprocessing technology, products in good flexibility, high quality
cutting efficiency and fracture resistance.
Pacakge:
6Pcs/Pack
&
Description：
1.
Unique designed 6 files system
2.
Increased Flexibility
3.
Greater Resistance to Cyclic Fatigue
4.
Compatible with all major rotary motors in the market
5.
Length: 25mm
6.
The cutting part of these instruments is made of a nickel-titanium alloy
|
Model
|
SX
|
S1
|
S2
|
F1
|
F2
|
F3
|
|
Taper
|
04
|
02
|
04
|
07
|
08
|
09
|
|
Size
|
#19
|
#18
|
#20
|
#20
|
#25
|
#30
|
|
Speed
|
150-300RPM
|
Treatment Technique:
1.Explore
the canal by using #10 stainless steel hand K files.
2.Use SX to open canal, set up a straight path.
3.Confirm
the working length ,use S1,S2 to shape and smooth the root canal.
4. According to the preparation status, to choose use F1- F3 to prepare to
working length.
Everytime
you change file, please ensure irrigate the root canal.
Frequently
clean and inspect the flutes of the rotary files.
Packing:
6Pcs/Box
&
Description:
Size:
SX-F3
Length:
25mm
1box/6pcs
For
dental Engine Use
Specific
models are as follows:
SX
19MM (Blade length): Engine use Shaping Files
S1
25MM (Blade length): Engine use shaping files
S2
25MM (Blade length): Engine use shaping files
F1
25MM (Blade length): Engine use finishing files
F2
25MM (Blade length): Engine use Finishing files
F3
25MM (Blade length): Engine use finishing files
&
Dental Absorbent Paper Points
SIZE:
F1-F2-F3
Packing:
60 Pcs/Pack
Applicable:
Root Endodontics
For
Dental Use
Product application:This product is a
special root canal cleaning material for dentistry. It is mainly used for
cleaning and dressing change of root canal in pulposis treatment.
Dental Root-Canal Obturating Points
Size:
F1-F3
Packing:
60 Pcs/Pack
Size
avaiable: F1, F2, F3, F1-F3
Descriptions:
1.
Universal Gutta Percha Points match the shape of the the Universal Finishing
Files and are colour-coded for easy identification.
2.
Available in sizes F1, F2, F3, and F1-F3 assortment packs with 60 Universal
Gutta Percha Points per pack.
3.
The advanced Universal Gutta Percha Points have been specifically designed for
both cold and warm obturation techniques.
Features:
For
all warm or cold obturations
The
high quality level of our gutta-percha points offers you the precision required
for optimal obturation results
Reliable
insertion down to the apex
Taper:
from 0.02 to 0.06
Available
in monochrome white in order to avoid tooth darkening.
