Ultrasonic Mist Maker Fogger 6 Head with Float Pond Fogger 5.5L/H Halloween Mister Fogger 250W Power Water Proof Mister Fog Humidifier Vegetable Preservation Landscape Greenhouse


BRAND NEW BOXED

  • PREMIUM MATERIAL: Made of high quality 304 stainless steel, the built-in copper plate radiator has better heat dissipation effect and longer service life. A buoy is provided for necessary need when the water is deep
  • YOU WILL GET: 1 x 6 Heads Ultrasonic Mist Maker, 1 x 250W Power Adapter, 1 x buoy, 4 x screws, 1 x small wrench, 12 x replacement discs
  • PROTECTIVE FUNCTION: 6 heads Mist Maker are in a design of independent line, not effecting each other; Water shortage protection, it will automatically powers off when lack of water. High temperature protection, above 55℃ does not work to avoid damage caused by long-term high temperature work. Without worry about the potential danger for safe use
  • EASY TO USE: Put mist maker in the water, and plug it in then the mist appears. Copper cavity helps better heat dissipation. The removable atomizing sheet is easy to replace, and it's service life is up to 6000 hours. The pond fogger is IP67 waterproof, and the 250W waterproof power supply has the protective function of moisture-proof and waterproof, but do not immerse in water
  • WIDE APPLICATION: Ultrasonic mist maker fogger very suitable for a variety of purposes, ultrasonic humidifiers are widely used, such as greenhouse vegetable humidification, pool garden landscape atomization, hotel landscaping, warehouse industrial humidification, creating stage effects and enhancing festival atmosphere. Enjoy creating a special atmosphere or meeting your humidification needs with this versatile, high-performance device

REASONS TO CHOOSE OUR ULTRASONIC MIST MAKER:

1. Ultrasonic fogger is made of 304 stainless steel material, durable and long-lasting.

2. Ultrasonic mist maker with water level sensor, it will automatically power off when there is a shortage of water.

3. Built-in copper plate radiator, better heat dissipation effect.

4. High temperature protection, the mist maker do not work above 55°C to avoid damage caused by long-term high temperature work.

5. The atomization disc can be replaced, and if a single atomizer head fails, other atomizer heads can also work normally.

Package include:

1 x 6 Heads Ultrasonic Mist Maker

1 x 250W Power Adapter

1 x buoy

4 x screws

1 x small wrench

12 x replacement discs

WARM TIPS :

1: After connecting the power, please don't turn the ultrasonic atomizer upside down, otherwise, it will easily damage the atomizer;

2: When the ultrasonic fogger is working, don't touch it;

3: The waterproof atomizer is used for a maximum of 10 hours a day, and overloading it will shorten the service life;

4: To ensure that the atomizer works properly, it is necessary to ensure the quality of the water (preferably using clean tap water).

NOTE: The machine is safe and simple to use, but there are some safety issues associated with using the machine irregularly or excessively. To use the machine more effectively and safely, please try the following tips as much as possible, which are simple but will greatly ensure using safety and increase the life of the machine.

01: Please do not place the Transformer and other Cable Connecting Parts into the water!

02: The Mist Making Board works nicely in about 2.75inch/7cm water depth. When the water is deeper than 3.9inch/10cm, please use a buoy. Please pay attention to the model when choosing a buoy. It is best to use tap water without essential oil.

03: Please use the mist maker no exceed 10 hours at most a day, working overload will badly shorten th service life.

04: The degradation of the ceramic discs will cause water leaking-in, please clean the ceramic discs with cloth regularly (depending on the using frequency) and replace with the new discs in time.

05: When replace the ceramic discs, please make sure the cavity is dry, and tighten the ring to prevent accessories loose resulting in water leaking-in.