About this item

• PREMIUM MATERIAL: Made of high quality 304 stainless steel, the built-in copper plate radiator has better heat dissipation effect and longer service life. A buoy is provided for necessary need when the water is deep. We provide extra 6 ceramic discs for replacement, 12(6+6) in total included in the package
• MIST MAKER PARAMETER: Number of atomizing cores: 10; Working Shell: 304 Stainless steel; Output: DC 48V, 8.4A; Input: 50-60Hz, 90-130Vac, 7A max; Power: 250W; Working water temperature: 33.8℉-131℉（1℃-55℃)
• PROTECTIVE FUNCTION: 6 heads Mist Maker are in a design of independent line, not effecting each other; Water shortage protection, it will automatically powers off when lack of water. High temperature protection, above 55℃ does not work to avoid damage caused by long-term high temperature work. Without worry about the potential danger for safe use
• EASY TO USE: Put mist maker in the water, and plug it in then the mist appears. Copper cavity helps better heat dissipation. The removable atomizing sheet is easy to replace, and it's service life is up to 6000 hours. The pond fogger is IP67 waterproof, and the 250W waterproof power supply has the protective function of moisture-proof and waterproof, but do not immerse in water
• FOG MACHINE THAT USES WATER: 6 head mist maker can quickly create fog for Large Room stage, wedding, festivals party like Halloween.Also can decorate landscape,mini water fountain, atomizer, rockery, pond, indoor fountains & accessories etc. 

1.Made of 304 stainless steel material.

2.The spray volume can be up to 4500ml/H.

3.the built-in copper plate radiator has better heat dissipation effect and longer service life.

4.Water shortage protection, it will automatically powers off when lack of water.

5.Atomization cavity protection, single atomization head is broken, other atomization heads can also work normally.

6.High temperature protection, above 55℃ does not work to avoid damage caused by long-term high temperature work.

7.Can be used in your pond, fountain, rockery, fish tank, tank, gardens, etc.

Package include:

1 x Ultrasonic 6 head Mist Maker

1 x 250W Waterproof power supply

1 x Buoy

1 x Wrench

WARM TIPS:

1: After connecting the power, please don't turn the ultrasonic atomizer upside down, otherwise, it will easily damage the atomizer;

2: When the ultrasonic fogger is working, don't touch it;

3: The waterproof atomizer is used for a maximum of 10 hours a day, and overloading it will shorten the service life;

4: To ensure that the atomizer works properly, it is necessary to ensure the quality of the water (preferably using clean tap water).

NOTE: The machine is safe and simple to use, but there are some safety issues associated with using the machine irregularly or excessively. To use the machine more effectively and safely, please try the following tips as much as possible, which are simple but will greatly ensure using safety and increase the life of the machine.

Tip01: Please do not place the Transformer and other Cable Connecting Parts into the water!

Tip02: The Mist Making Board works nicely in about 2.75inch/7cm water depth. When the water is deeper than 3.9inch/10cm, please use a buoy. Please pay attention to the model when choosing a buoy. It is best to use tap water without essential oil.

Tip03: Please use the mist maker no exceed 10 hours at most a day, working overload will badly shorten th service life.

Tip04: The degradation of the ceramic discs will cause water leaking-in, please clean the ceramic discs with cloth regularly (depending on the using frequency) and replace with the new discs in time.

Tip05: When replace the ceramic discs, please make sure the cavity is dry, and tighten the ring to prevent accessories loose resulting in water leaking-in.