Description
Prestige Paints 100% acrylic exterior latex paint and Premiumr in one is a high end paint intended to be used on exterior surfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl**, aluminum, and factory Premiumd siding. This durable, washable paint combines fade resistance, stain resistance and ease of cleaning, providing a long-lasting finish that can withstand wear and tear while remaining easy to maintain. Satinâs subtle sheen adds elegance and enhances both light and dark colors. On exterior surfaces, satins are ideal for painting siding that is in good to excellent condition. Outside surfaces painted with satin paint are easy to clean and shed water more effectively than flat or matte paint. They are also a good choice for painting trim and shutters. Average coverage 250-400 sq. ft. (23-37 square meters) per gallon. Surface Preparation: Remove dirt, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. New woods may require an oil base Premiumr/sealer. On metal use proper rust Premiumr. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). For best performance, apply two coats of paint on new surfaces. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. Monitor-rendered and printed colors may vary from actual paint colors due to differences in color calibration between digital devices and the physical properties of pigments, lighting conditions, and printing techniques. Note that paint color can vary due to sheen, light, surface, and application method. *Prestige Paints uses proprietary base paints and tints to create and match colors.