Woodpecker HW-5L (LED)

Brand: Woodpecker (100% original)
Model: HW-5L
FDA,CE certificated
Detachable handpiece
One Year quality guaranteed
Compatiable with Woodpecker UDS Scalers (UDS-A LED, UDS-E LED, UDS-L LED, UDS-K LED, UDS-P LED, UDS-N2 LED, UDS-N3 LED etc.) and EMS LED Scaler
Brand new and get from the factory directly
Autoclavable under the high temperature of 135℃ and pressure of 0.22Mpa

*********************************************************************************************************************************************

Woodpecker HW-3H (Without LED)

Brand： Woodpecker (100% ）Original Promise）
Model: HW-3H
FDA, CE certificated
Detachable handpiece
One Year quality guaranteed
Compatible with Woodpecker and EMS scaler
Brand new and get from the factory directly
Autoclavable under the high temperature of 135℃ and pressure of 0.22Mpa

**********************************************************************************************************************************************
DTE HD-7L (LED)

Brand：DTE (100% ）Original Promise）
Model: HD-7L
Detachable handpiece with LED light, better visibility.
Compatible with Woodpecker DTE series ultrasonic scalers (DTE-V2 LED, DTE-V3 LED, DTE-D5 LED,  DTE-D7 LED etc.)
Fits for Woodpecker DTE series, Satelec ACTEON and NSK tips
Shell of the handpiece is made of special imported plastic America.
Without cracking or deformation under the pressure.
FDA, CE certificated
Autoclavable under the high temperature of 135℃ and pressure of 0.22Mpa

**********************************************************************************************************************************************

Brand： DTE (100% ）Original Promise）
Model: HD-7H
FDA,CE certificated
Detachable hand piece
 Compatiable with DTE/Satelec Scalers
Autoclavable under the high temperature of 135℃ and pressure of 0.22Mpa

**********************************************************************************************************************************************

SATELEC P5 ( NEWTRON Style)

For Satelec Acteon Suprasson P5 Newtron 
Almost the same with Satelec Acteon original
Perfectly fit, more than 500pcs sold out
Autoclavable 135℃
Titanium transducer, high quality 

*************************************************************************************************************************************

DMXDENT HS-7L (NEWTRON LED Style)
Model:HS-7L
Brand: DMX (100% Original)
Compatible with Satelec ACTEON Newtron P Max XS, P2 LED, P5 XS LED, SP NEWTRON LED and Piezotome 2 / Implant Center 2 Scaler 
Compatiable with Woodpecker DTE series, NSK, and Satelec ACTEON tips
Detachable handpiece with LED light 
Autoclavable under the high temperature of 135℃ and pressure of 0.22Mpa

*************************************************************************************************************************************

G1  ------  Used to remove calculus and of supragingival, neck of teeth and hard calculus on  the teeth point.

G2  ------  Used to remove the subgingival calculus. 
G3  ------  Used to remove the calculus and plaque of subgingival interdental calculus.
G4  ------  Used to remove all supragingival calculus and plaque.

P1  ------ The tip is thin and used to remove subgingival calculus and to clean the periodontal area

P3  ------ The tip is bent left for subgingival scaling

Compatible with: Woodpecker DTE Series NSK, SATELEC ACTEON ultrasonic Scaler.
GD1: Removal of supragingival deposits in all quadrants.
GD2: Removal of heavy supragingival deposits. Apply flat end to surgace of teeth.
GD3: Removal of supragingival in all quadrants, including the interproximal and sulcus areas.
GD4: Recommended for the treatment of interproximal spaces and for supragingival scaling.
PD1: Slim and sharp, recommended for cleaning and irrigating of subgingival deposits.
PD3: Recommended for cleaning and irrigating of periodontal deep pockets.

PD3D:Used to level off the surface of endo during the periodontal flap surgery

PD4D:Used for preparing good endodontics jaws.
Used to determine root canal location, and used for removing the calcification in the coronal third of the root canal

s#1 Universal Tip. Recommended for simple cases: gross supra-gingival scaling.
s#2 Voluminous Calculus. Indicated for the removal ofsignificant supra-gingival deposits. Apply the flat part to the tooth surfaces.
s#3 Colorations and stains. Removal of marks and stains (tobacco, tea, coffee, etc.). The tip is used by applying the rounded extremity to the surface to be treated.
s10Z Sub-gingival. Recommended for scaling medium pockets (< 4mm). Removal of biofilm and soft deposits, while evaluating the depth of the pockets using the marks every 3mm.
s1S Slim tip. Developed for supraand sub-gingival scaling. Its more active lateral edges make it suitable for scaling the interproximal spaces.
s10P Shallow pockets. Fine round instrument suitable for scaling pockets less than 2-3mm deep. Supra-gingival scaling for children and shallow pockets scaling.
s10X Interproximal. With its flat active part, it is particularly suitable for the interproximal spaces and supra-gingival scaling. Its anatomical shape allow fast and efficient procedure.
Periodontal Curette & debridement
 
Item Description:
For Periodontal Curette & debridement
Fits for Satelec Acteon Newtron Ultrasonic Scaler, Woodpecker DTE series Ultrasonic Scaler and NSK Ultrasonic Scaler
Model to choose:
sH3 Initial periodontics, anterior sector. Ideal instrument for initial treatment, it makes treatment of the incisor-canine block possible. The guide edge is oriented parallel to the pocket.
sH4L Periodontics for the premolar and molar sectors, left-oriented. First instrument in the sequence for treating all the surfaces and the furcations.
   • Maxillary: buccal and distal surfaces of sector 2, pivots at 13, then the buccal and mesial surfaces of sector 1.
   • Mandibular: buccal and distal surfaces of sector 4, pivots at 43, then lingual and mesial surfaces of sector 3.
sH4R Periodontics for the premolar and molar sectors, right-oriented. Second instrument in the sequence, it follows the use of the sH4L tip.
   • Maxillary: palatine and mesial surfaces of sector 2, pivots at 13, then buccal and distal surfaces of sector 1.
   • Mandibular: lingual and mesial surfaces of sector 4, pivots at 43, then buccal and distal surfaces of sector 3.
Periodontal Maintenance
 
Item Description:
For Periodontal Maintenance
Fits for Satelec Acteon Newtron Ultrasonic Scaler, Woodpecker DTE series Ultrasonic Scaler and NSK Ultrasonic Scaler
Model to choose:
sTK1S Short probe. Graduated every 3mm, the sTK1S tip is recommended for examining shallow and medium pockets (< 4mm) and for the maintenance of simple cases.
sTK1L Long probe. Recommended for examining and maintenance of medium to deep pockets (> 4mm). It is a diagnosis aid during the debridement and irrigation of pockets.
sTK2L Maintenance of thepremolar and molar sectors, left-oriented. Recommended for the maintenance of moderate to deep pockets and furcations. Equivalent to the Nabers probe.
sTK2R Maintenance of the premolar and molar sectors, right-oriented. It is complementary to the sTK2L tip and is recommended for the maintenance of moderate to deep pockets and furcations. Equivalent to the Nabers probe.
Ultrasonic Surgery Tips 
The second generation tips Ⅱ
 
Compatible with
Satelec Acteon Implant Center 2
Satelec Acteon Piezotome Cube
Satelec Acteon Piezotome 2
Satelec Acteon Piezotome Solo (LED)
Essential Tips
 
Decriptions:
This kit is a selection of the most popular surgical tips kit.
Due to the ultrasonic frequency modulation, a selective cut is achieved in surgical mode. Therefore, these tips limit the risk of soft tissue injury such as gingiva, ligaments, periodontal fibers, and nerves. The sterile spray helps to cool the tips.
These 6 tips can be applied to all of the following interventions:
Osteotomy, osteoplasty (BS1 and BS4 II tips)
Extractions (LC2 II tip)
Sinus Elevation by the lateral approach (SL1 II, SL2 II and SL3 II tips)
Model to choose:
V-BS1 Ⅱ: Saw intended for cutting of cortical bone in surgical orthodontics, pre-implant surgery,and bone distraction.
V-BS4 Ⅱ: Circular scalpel angled at 130°, for osteoplasty and harvesting of bone particles or chips. Ridge osteoplasty, periodontal surgery, cysts exerisis, etc.
V-LC2 Ⅱ: The particularly slim LC2 allows access to the tight spaces between the root and the alveolar bone without risk of damaging cortical bone. Length of active part: 10mm
V-SL1 Ⅱ: Diamond-coated tip for vestibular bone window cut and for attenuation of sharp angles.
V-SL2 Ⅱ: Diamond- coated ball tip for smoothing the vestibular bone window and precise osteoplasty. Ball diameter: 1.5mm. Laser mark every 2mm.
V-SL3 Ⅱ: Plateau-tip, non- cutting, for sinus membrane elevation on the vestibular bone window’s edges. Plateau diameter: 5 mm.
Essential Kit: including 6 tips V-BS1, V-BS4, V-LC2, V-SL1, V-SL2, V-SL3 + Tips Holder
Bone Surgery Tips
 
Descriptions:
Thinness and security.
Bone Surgery (BS) tips, principally intended for performing bone graft, allow cutting excising and remodeling bone structures without any risk of soft tissue lesions.
Comprising six ultrasonic tips (three saws and three scalpels) adapted to the different cases that arise in the intraoral environment, the BS Kit is used for dental clinical treatments such as bone harvesting, crest expansion, preparation of the implant site and accessing the lower alveolar nerve.
Model to choose:
V-BS1 Ⅱ: Saw intended for cutting of cortical bone in surgical orthodontics, pre-implant surgery,and bone distraction.
V-BS2L Ⅱ: Bone saw with four teeth, used for cutting the ramus cortical bone. Left  oriented, it is used to create vertical and horizontal osteotomy lines on the patient’s right mandible.
V-BS2R Ⅱ: Bone saw with four teeth, used for cutting the ramus cortical bone. Right  oriented, it is used to create vertical and horizontal osteotomy lines on the patient’s left mandible.
V-BS4 Ⅱ: Circular scalpel angled at 130°, for osteoplasty and harvesting of bone particles or chips. Ridge osteoplasty, periodontal surgery, cysts exerisis, etc.
V-BS5 Ⅱ: Flat scalpel, for fine osteotomies. Ridge expansion, thin osteotomy, distraction, preparation of buccal bone flap on thick cortical terrain prior to sinus lift surgery.
V-BS6 Ⅱ: Curved scalpel particularly effective for substantial osseous reshaping. This tip is used to perform osteoplasties and reshaping of the bone not assuring the tooth support. It can also be used to mark a prosthetic reference point on enamel, if needed, where osteoplasty will begin.
Bone Surgery Kit: including 6 Tips V-BS1, V-BS2L, V-BS2R, V-BS4, V-BS5, V-BS6 + Tips Holder
Sinus Lift Tips
 
Decriptions:
For unmatched visibility.
The Sinus Lift Kit offers the practitioner a straightforward and safe answer to the lateral sinus lift operation. Thanks to the ultrasonic frequency modulation, the risk of membrane damage is limited. 
The diamond-coated tips for window cutting and the three spatula tips for sinus lift SL1 and SL2 are cooled by the sterile spray (thus avoiding tissue damage from exposure to high temperatures). 
The use of a manual instrument is recommended to control the membrane detachment. Moreover, the cavitation effect enables excellent visibility of the operating field. These tips guarantee a fine, clean and effortless cut.
Model to choose:
V-SL1 Ⅱ: Diamond-coated tip for vestibular bone window cut and for attenuation of sharp angles.
V-SL2 Ⅱ: Diamond- coated ball tip for smoothing the vestibular bone window and precise osteoplasty. Ball diameter: 1.5mm. Laser mark every 2mm.
V-SL3 Ⅱ: Plateau-tip, non- cutting, for sinus membrane elevation on the vestibular bone window’s edges. Plateau diameter: 5 mm.
V-SL4 Ⅱ: Non-cutting spatula, oriented at 90°, for sinus membrane elevation inside the sinus. Spatula diameter: 4 mm.
V-SL5 Ⅱ: Non-cutting spatula, oriented at 135°, used for sinus membrane elevation inside the sinus and for disengagement of anatomical structures. Spatula diameter: 4 mm.
Sinus Lift Kit: including 5 Tips V-SL1, V-SL2, V-SL3, V-SL4, V-SL5 + Tips Holder
Extraction Tips
 
Descriptions:
For atraumatic extractions without bone destruction.
This kit is intended for treatment such as extraction of wisdom teeth, fractured roots, impacted teeth and root section. The six ultrasonic tips are each adapted to the anatomical context (reduced visibility and space) of anterior and posterior areas.
Inserted between the cementum and the periodontal ligament of the tooth, the tips will widen the ligamental space. Thus separated from its attachment system, the tooth can be removed rapidly and with a less traumatic luxation. The alveolar bone edge can be kept intact; an alveolectomy is therefore avoided.
Usage guidelines recommendations:
- The tip must be activated before its insertion in the periodontal space.
- The tip must be placed parallel to the root.
- Perform a to-and-fro movement towards the apex.
- It is important not to exert a lever effect with the tips.
Model to choose: 
V-LC1 Ⅱ: To be inserted deeply and with great care, along the periodontal ligament, between the root and the alveolar bone. Length of active part: 9mm
V-LC2 Ⅱ: The particularly slim LC2 allows access to the tight spaces between the root and the alveolar bone without risk of damaging cortical bone. Length of active part: 10mm
V-LC2L Ⅱ: Oriented at 45° to the left or to the right, the LC2L/LC2R facilitates access to the posterior areas. The tip’s slimness respects the morphology of cortical bone and offers working comfort in the sectors with reduced visibility. Length of active part: 10mm
V-LC2R Ⅱ: Oriented at 45° to the left or to the right, the LC2L/LC2R facilitates access to the posterior areas. The tip’s slimness respects the morphology of cortical bone and offers working comfort in the sectors with reduced visibility. Length of active part: 10mm
V-LC1/90 Ⅱ: To be inserted deeply and with great care, along the periodontal ligament, between the root and the alveolar bone. Length of active part: 9mm.
V-Pirahna Ⅱ: Saw- tooth tip with double cutting surfaces, endowed with a laser marker every 3mm, to evaluate depth or cutting thickness. It is particularly efficient for hemisections and root amputations. It is also indicated to split impacted molars during extraction.Length of active part: 9mm
Extraction Kit: including 6 Tips V-LC1, V-LC2, V-LC2L, V-LC2R, V-LC1/90, V-Pirahna + Tips Holder
Tip Holder
Tips holder
135 degree Autoclavable
For 6 tips