Fluke 787 Processmeter + Extras

Nice used condition.
All functions test OK including the output source & simulate.
Tested the 3 auto ramp speeds and manual ramp modes in source & simulate.

Includes:

Fluke 787 processmeter
Fluke TLK-225 master accessory set
     TP175 TwistGuard test probes
      AC280 hook clips
      AC220 alligator clips
      AC283 pincer clips
      TL224 test leads
      AC285 large alligator clips
Fluke TL75 test leads
Fluke TP88 rigid back probe pins
Fluke TPAK magnetic holder
Fluke case

DMM and loop calibrator in one tool

    Clear LCD with backlight; 4,000 counts (30,000 counts for dc current)
    Externally accessible battery for easy battery changes.
    1000V overload protection on V, ohms, frequency.
    150V overload protection on mA, backed up by 440 mA 1000V fuses
    25% Manual Step plus Auto Step and Auto Ramp on mA output.
    Simultaneous mA and % of scale readout on mA output
    Min / Max / Average / Hold / Relative modes

Specifications:

Current measurement     Range     0-1 A (for 30 seconds)
Resolution     1 mA
Accuracy     0.2% + 2 LSD
Range     0 - 30 mA / 0 - 0.44 A
Resolution     0.001 mA
Accuracy     0.05% + 2 LSD

Current sourcing     Range     0-20 mA or 4-20 mA (press blue button while powering on to                                                                                                                                                                  switch ranges)
Resolution     0.05% of span
Display current and % of span     Yes
Auto step, auto ramp                Yes

Drive Capability     500 Ω @ 24 mA

Continuity     Beeps for resistance < 100 ohms

Voltage measurement     Range     0-1000 V AC or DC
Resolution     0.1 mV to 1.0 V
Accuracy     0.1% Rdg + 1 LSD (VDC)


Diode test     2.4 V shows diode voltage drop

Environmental Specifications

Operating temperature     -20°C to 55°C
Storage temperature     -40°C to 60°C
Humidity (without condensation)     95% up to 30°C
75% up to 40°C
45% up to 50°C
35% up to 55°C
Temperature coefficient     0.05 x (specified accuracy) per °C (for temperatures < 18°C or > 28°C)

Safety Specifications

Electrical safety     Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-92
Overvoltage category     IEC 1010-1 CAT III
Maximum voltage     1000 V rms

Mechanical and General Specifications

Size     32 x 87 x 187 mm
Weight     369 g
Batteries     Single 9 V Alkaline
Battery life     50 hours typical (measurement), 12 hours typical (sourcing 12 mA)
Shock and vibration     Random, 2 g, 5-500 Hz
1 meter drop test