1: Please double-check the OE number before purchase to ensure fitment.

2：You may provide last 8 digits of your VIN to a local authorized dealer on your own to help confirm OE reference number, if available.

In order to ensure that you get the item well

Please confirm your Car Model match our description

★Application:

For Buick Enclave 2008-2012

For Chevrolet Traverse 2009-2012

For GMC Acadia 2007-2012

For Saturn Outlook 2007-2010

★Kit Includes:
1x Front Quick Install Ready Strut Assembly - 172518
1x Front Left Lower Control Arm & Ball Joint Assembly Part Number# K621232, RK621232, 25798012
1x Front Right Lower Control Arm & Ball Joint Assembly Part Number# K621231, RK621231, 25798011
2x Front Stabilizer Bar Link Part Number# K750155, 25981951, 15127978
2x Inner Tie Rod End Part Number# EV800572, 15869898
2x Outer Tie Rod End Part Number# ES800286, 18569897
2x Rack and Pinion Tie Rod Boot & Bellows w/locking c-clamps

★Struts Specification：

- Part Number/OEM Number: 172518
- Install position: Front
- Damping: Not available
- Spring rate Front: 4kg/mm ( 224lbs/in)
- Spring length Front: 350mm
- Front spring inner diameter: 168mm
- Shock overall length Front: 610mm
- Color: Black body with golden spring

★Control Arm Tie Rods Kit Specifications:

Condition：Brand-new
Installation Location: Front, Inner, Left, Lower, Outer, Right
Fitment Type：Direct Replacement
Includes ：Ball joints & Bushings
Material: Steel
 

★Features:

1. OEM direct replacement, ensure safe handling and ride comfort

2. Keep OE height

3. Use more wear-resistant NBR bushing

4. Pass 3 million cycles fatigue durability test

5. The shock outer cylinder is made of high-quality 20# steel, and the piston rod is made of 45# steel,  which can effectively reduce wear and prolong lifespan

6. Optimize the damping seal to effectively avoid oil leakage

7. The spring is made of 55CrSi material with enlarged diameter to make a stronger supporting force. Meanwhile, a sportive version with higher spring rate is available to satisfy better handling demand.

8. Use 8.8-grade bolts with high tensile strength to ensure smooth installation when tightened with the correct torque values

9. Comes with installation manual, guide for quick installation

★Notes:

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loosed nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the life time