• Vehicle Compatibility Information:
  • For Toyota Avalon 2021 L4 2.5L Gas Front Right  For Toyota Camry 2020-2022 L4 2.5L Gas Front Right AWD For Toyota RAV4 2019-2023 L4 2.5L Gas Front Right AWD; USA Built
  •  
  • What Are The Signs Of a Failing CV Axle?
  • You may notice a clicking sound when turning the wheel or accelerating and feel a vibration as the vehicle is in motion. You may also notice grease on the inside of your wheels or tires as the lubricant leaks out from a damaged CV boot.
  •  
  • The steps and tools needed for an CV axle replacement
  • This is a challenging and technical project
  • Tool List
  • Jack
  • Jack stands
  • Front Passenger CV Axle Assembly For Toyota Camry 2.5L 2020-2022 AWD

    Vehicle Compatibility Information:

    For Toyota Avalon 2021 L4 2.5L Gas Front Right 
    For Toyota Camry 2020-2022 L4 2.5L Gas Front Right AWD
    For Toyota RAV4 2019-2023 L4 2.5L Gas Front Right AWD; USA Built

     

    What Are The Signs Of a Failing CV Axle?

    You may notice a clicking sound when turning the wheel or accelerating and feel a vibration as the vehicle is in motion. You may also notice grease on the inside of your wheels or tires as the lubricant leaks out from a damaged CV boot.

     

    The steps and tools needed for an CV axle replacement

    This is a challenging and technical project

    Tool List

    Jack

    Jack stands

    Automotive tool set (pliers, screwdrivers, sockets)

    Pry bar

    Lubricant

    Brake Cleaner

    Hammer or mallet

    Impact wrench (optional)

    CV axle replacement

    Pro Tip
    Additional specialized tools such as tie-rod end pullers, ball joint removers, and vehicle-specific sockets may be required

    1. Slightly loosen the wheel lug nuts. Raise and secure the vehicle. Remove the wheels. Remove the cotter pin. Unlock the spindle nut safety fastener according to the repair manual instructions.

    Tip: Leave one side assembled while you work on the other so you can remember how things go back together.

    2. Loosen the nut with a proper socket and breaker bar. Another bar or large screwdriver wedged between the lug nuts can help hold the wheel in place. Brake application simplifies the wheel turn issue.

    3. On some vehicles, the brake caliper and rotor must be removed before proceeding. Refer to your repair manual for your vehicle's requirements. If you find yourself having to remove the brake caliper, suspend it from a point on the fFor Rame or wheel well with a length of coat hanger wire so it doesn't hang from its brake hose.

    4. Remove the cotter pin and castle nut from the lower ball-joint. Disconnect the ball-joint from the steering knuckle with a removal tool (your pickle fork is likely to come in handy here). Swing the knuckle and hub outward to free the outboard axle assembly.

    5. Gently wedge a pry bar or a large flat blade screwdriver between the axle and transmission. Carefully pry the axle assembly away from the transmission. Be careful not to damage any transmission seals.

    6. The drive axle assembly should now slide right out. Take a good look at the drive assembly location, and then remove. The new one will go back the same way.

    7. Grease the splines before insertion with gear grease. Insert the replacement drive axle assembly and reverse the disassembly process. Torque all fasteners to specification. Don't forget to use new cotter pins.

     

    Noticed

    -Instruction is not included. Professional installation is recommended

    -Accessories: You will get exactly showing in the picture

    -Please confirm your original part number before purchasing

    -Please contact us for anything we can help you with



    Payment

    We will only ship to the confirmed shipping address given with the payment.

    We do not offer local pickups.

    Shipping

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. The images shown are not the actual item and are for your reference only.

    3. Fast shipping:All our packages use USPS Package Service

    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1. You have 7 days to contact us and 10 days to return it from the date it was received.

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    Contact Us

    We are always been trying to provide best service and reliable products for every customer.


    If you are satisfed with the product you recieved,please leave us positive feedback.


    If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.

    Shop Category
    Front Passenger CV Axle Assembly For Toyota Camry 2.5L 2020-2022 AWD

    Vehicle Compatibility Information:

    For Toyota Avalon 2021 L4 2.5L Gas Front Right 
    For Toyota Camry 2020-2022 L4 2.5L Gas Front Right AWD
    For Toyota RAV4 2019-2023 L4 2.5L Gas Front Right AWD; USA Built

     

    What Are The Signs Of a Failing CV Axle?

    You may notice a clicking sound when turning the wheel or accelerating and feel a vibration as the vehicle is in motion. You may also notice grease on the inside of your wheels or tires as the lubricant leaks out from a damaged CV boot.

     

    The steps and tools needed for an CV axle replacement

    This is a challenging and technical project

    Tool List

    Jack

    Jack stands

    Automotive tool set (pliers, screwdrivers, sockets)

    Pry bar

    Lubricant

    Brake Cleaner

    Hammer or mallet

    Impact wrench (optional)

    CV axle replacement

    Pro Tip
    Additional specialized tools such as tie-rod end pullers, ball joint removers, and vehicle-specific sockets may be required

    1. Slightly loosen the wheel lug nuts. Raise and secure the vehicle. Remove the wheels. Remove the cotter pin. Unlock the spindle nut safety fastener according to the repair manual instructions.

    Tip: Leave one side assembled while you work on the other so you can remember how things go back together.

    2. Loosen the nut with a proper socket and breaker bar. Another bar or large screwdriver wedged between the lug nuts can help hold the wheel in place. Brake application simplifies the wheel turn issue.

    3. On some vehicles, the brake caliper and rotor must be removed before proceeding. Refer to your repair manual for your vehicle's requirements. If you find yourself having to remove the brake caliper, suspend it from a point on the fFor Rame or wheel well with a length of coat hanger wire so it doesn't hang from its brake hose.

    4. Remove the cotter pin and castle nut from the lower ball-joint. Disconnect the ball-joint from the steering knuckle with a removal tool (your pickle fork is likely to come in handy here). Swing the knuckle and hub outward to free the outboard axle assembly.

    5. Gently wedge a pry bar or a large flat blade screwdriver between the axle and transmission. Carefully pry the axle assembly away from the transmission. Be careful not to damage any transmission seals.

    6. The drive axle assembly should now slide right out. Take a good look at the drive assembly location, and then remove. The new one will go back the same way.

    7. Grease the splines before insertion with gear grease. Insert the replacement drive axle assembly and reverse the disassembly process. Torque all fasteners to specification. Don't forget to use new cotter pins.

     

    Noticed

    -Instruction is not included. Professional installation is recommended

    -Accessories: You will get exactly showing in the picture

    -Please confirm your original part number before purchasing

    -Please contact us for anything we can help you with



    We will only ship to the confirmed shipping address given with the payment.

    We do not offer local pickups.

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. The images shown are not the actual item and are for your reference only.

    3. Fast shipping:All our packages use USPS Package Service

    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. You have 7 days to contact us and 10 days to return it from the date it was received.

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    We are always been trying to provide best service and reliable products for every customer.


    If you are satisfed with the product you recieved,please leave us positive feedback.


    If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.


    Copyright of autoutdoor. All rights reserved.