OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays
0.96 inch OLED Display Module is a precise small, White OLED module which can be interfaced with any microcontroller using SPI protocol. It is having a resolution of 128x64. And it is fully compatible with multiple controlling chips including Arduino and more.
Features
- Work perfectly well without the need of backlight.
- 128*64 high resolution, ultra wide viewing angle.
- Super low power consumption–only 0.08W when the whole screen lights up and 0.06W when displaying characters.
- Fully compatible with multiple controlling chips including Arduino and more.
- Support a wide range of voltage input.
Specifications
Key Parameters
- Driver Chip: SSD1306
- Interface: 3-wire SPI, 4-wire SPI, I2C
- Resolution: 128×64
- Display Size: 0.96inch
- Colours: 1/4 yellow section, 3/4 blue section
- Visible Angle: >160°
- Operating Temp. (℃): -20~70
- Storage Temp. (℃): -30~80
- Operating Voltage: 3.3V / 5V
Interface
| PIN NO. | SYMBOL | DESCRIPTION |
|---|---|---|
| 1 | VCC | Power positive (3.3~5V power input) |
| 2 | GND | Ground |
| 3 | NC | NC |
| 4 | DIN | Data input |
| 5 | CLK | Clock signal input |
| 6 | CS | Chip selection, low active |
| 7 | D/C | Command signal, low level for command, high level for data |
| 8 | RES | Reset signal, low active |
Kit Content
- 1 x 0.96 inch RGB OLED (B)