Ebay asked us to write this: This does not alter any emissions equipment. This kit does not include a fueling substitute or a tuning deleter.

Procharger's D1X (over 1000HP rated charger) kit for a Dodge Challenger 5.7L.

Fits 2015 to 2023 Challengers

FULL Procharger kit (over $8200 from Procharger), PLUS $800 in upgrades, see below

The kit is about 4 years old, but the D1X charger is about 200 miles old.

We were stuck at about 620HP, so we upgraded to the D1X (over $4000 just for it) It made 715HP at the wheels and 612 TQ.

That's at the tires on our Mustang 100SE Eddy Current dyno. The D1X is the upgrade charger. Upgraded GripTec 3 inch blower pulley. Again, this D1X has less than 200 miles on it. Can provide proof of invoice from Procharger. Includes upgraded TurboXS blowoff valve instead of silly ProFlow valve.

Upgraded air filter, you get the one in the picture Kit is drilled and tapped for double water/meth injection. We can weld them closed if you don't want them.

If you see a section of the intercooler piping that has no paint on it,

that's a slight upgrade. That aluminum part goes under and through the radiator

support section and down to the intercooler.

It gets very very close to the idler pulley of the kit.

It had rubbed some. So we tig-welded extra aluminum to that part.

Just in case it rubbed more, it wouldn't lose boost.

Negotiations: for $7700, you can have the fuel rails and 1000CC injectors

We can change out the 3inch pulley to a 3.4inch pulley. Located at JGYCustoms, in Atkins, VA, at exit 50 on I 81. Utility Trailer is behind us. Feel free to call 276 782 9100

How did we get that much power? Tuning with HPTuners, 1000cc injectors, and a Walbro 490LPH in tank pump.

The shipping price is not accurate. We couldn't figure out how to get that part correct on Ebay. Shipping is based on where you are.

example: to VT, it might be $150.

You can also pick it up from us.

please contact us and we can figure out what shipping it to you, with UPS, would actually cost.