Auto Bark and Training Collar Combo

• Can be used as a Barking Collar without Remote.
• Also a Training Collar.

Here's how to turn on or off the Auto Mode

a. Press and hold the power button of the remote control for about 3 seconds, when you hear a "beep" sound from the receiver, the Auto Mode is turned on.

b. Press again for 3 seconds, you will hear the receiver beep twice, and the Auto Mode will be turned off.

Dog Collar with 4 Training Modes, Adjustable Levels

a. Vibration (Level 1 - 100)

b. Shock (Level 1 - 100)

c. Beep (Default)

d. Auto Mode (Sensitivity Level 1 -5)

Here's how to adjust the sensitivity of the automatic mode?

• Auto Mode Sensitivity: Level 1 to 5
• The higher the sensitivity, the easier it is to activate the collar.

2 Different Ways to Control 3 Dogs

• To control 3 dogs with 1 Remote Control.
• Control Way 1 : To control 3 dogs at the same time.
• Control Way 2 : To control 3 dogs Separately.

To control 3 Dogs at the same time

• Please pair 3 Receivers on the same Channel of the Remote Control.
• Using this pairing way, you will be able to control 3 Dogs at the same time, the receivers will receive the signals at the same time.

To Control 3 Dogs Separately

• Please pair different receivers on different Channels of the Remote Control.
• Using this pairing way, when you control different dogs, you need to switch between different channels.

Here's how to Pair the Remote with the Receiver.

Step 1: Press and Hold the Power Button until the Indicator flashes.

Step2: Press the Function Button (Beep, Vibration or Shock).

Step3: Check if the Receiver is activated.

Here's how to test the power of the Receiver.

• Press the power button twice in a row for testing.
• Hearing 1 beep means that the battery level is below 20%.
• 2 beeps means below 40%, 3 beeps means below 60%,
• 4 beeps means below 80%, 5 beeps means below 100%,

Here's how to test the Shock Function.

Please watch the video to know what's in the box.

Here are the Package Details

Handy lanyard for remote control.