CV Boot Guardian Premium Protection Covers (2‑Pack) – Aramid CV Boot Protection

Stop Costly CV Joint Repairs Before They Start

One torn CV boot can lead to a noisy CV joint, breakdowns and repair bills in the hundreds or even thousands of $$.
CV Boot Guardian adds a tough aramid (Kevlar‑type) protective layer over your existing CV boots to keep mud, stones and water out – and grease in.

---

Key Features & Benefits

• Aramid Fiber Construction
  Made from premium aramid fiber (similar to Kevlar), highly resistant to:

  • Abrasion from mud and sand
  • Cuts and punctures from rocks and sticks
  • Tears and general wear in harsh off‑road use

• Universal Fit

  • Suitable for most 4WDs, ATVs, UTVs, buggies and cars with CV boots
  • Flexible design wraps around different boot sizes

• Easy, No‑Special‑Tools Installation

  • Simple slip‑on, wrap and cable‑tie design
  • Can be installed in minutes in your driveway or shed

• Heat & Chemical Resistant

  • Handles high temperatures around the drivetrain
  • Resistant to oils, grease and common automotive chemicals

• Prevents Costly Repairs

  • Shields CV boots from debris, mud, stones and water crossings
  • Helps prevent splits, grease loss and contamination
  • Extends the life of your CV boots and CV joints, saving you money over the long term

---

What’s Included

• 2 × CV Boot Guardian Protection Covers
  Enough to protect up to 2 CV boots (e.g. front and rear axles on many vehicles).

---

Fitting Instructions (4 Simple Steps)

Note: CV Boot Guardian is designed to fit any vehicle with CV boots and can save you hundreds of $$ every year in repairs when installed over healthy OEM or replacement boots.

1. Position
   Place the CV Boot Guardian around the CV shaft in a cone shape close to the CV boot, with the large Velcro patch on the inside.

2. Adjust Size
   Adjust the CV Boot Guardian to the size of the CV boot using the Velcro straps and patch.

3. Secure Velcro
   Once it is adjusted to the right size (snug, not too tight or too loose), press down on the Velcro to attach.

4. Lock with Cable Ties
   Place two large cable ties through the loops on the end of the CV Boot Guardian and tighten as much as possible to secure it to the CV boot shaft. Cut off excess cable tie ends.

Optional for Extreme Terrain:
For heavy mud, rocks or long off‑road trips, you can add extra cable ties higher up on the cone to further secure the cover in place.

---

Why Choose CV Boot Guardian?

• Extra layer of protection in real‑world off‑road conditions
• Ideal for 4WD touring, ATV/UTV work, and frequent rough‑road driving
• Simple insurance against expensive CV boot and CV joint failures

Protect your CV boots and enjoy a smoother, worry‑free drive with CV Boot Guardian Premium Protection Covers (2‑Pack).