The Wouxun KG-UV980P is a new quad-band base/mobile two-way radio, loaded with versatile features at an exceptionally affordable price. Boasting 4-band transmission and 8-band reception, this high-performance radio delivers up to 40W (UHF) and 50W (VHF) output—ensuring maximum communication range and power without compromising on cost.
-
Quad-band transmission (covers 6/4/2/70cm bands) and 8-band reception.
-
Output power selectability: VHF (50W/20W/10W/5W) | UHF (40W/20W/10W/5W).
-
Twin-band/same-band simultaneous reception for multi-channel monitoring.
-
Wide/narrow bandwidth (25KHz/12.5KHz) toggle via one-button operation.
-
Superheterodyne receiver with AM reception (108MHz–136MHz) and FM reception (26MHz–987.995MHz, see Technical Specifications for details).
-
999 programmable memory channels for easy access to frequently used frequencies.
-
Advanced channel functions:
-
CTCSS/DCS encoding/decoding (supports non-standard settings).
-
DTMF encoding/decoding (with DTMF hand microphone).
-
Priority channel scanning, grouping channel scanning, and scan channel add/delete.
-
Multiple scanning modes for efficient frequency monitoring.
The KG-UV980P functions as a full-duplex cross-band mobile repeater, with 5 selectable modes:
-
Normal radio mode
-
Directional cross-band repeater mode
-
Two-way cross-band repeater mode
-
Repeater receiving mode (receiver-only)
-
Two-way cross-band relay mode (connect two units to build a custom repeater).
Note: A 15-foot extension cable and microphone connection cable (both included) enable linking two KG-UV980P radios for repeater use.
-
Triple-speaker setup: Dual built-in chassis speakers (top-mounted) + speaker-integrated DTMF hand microphone (audio power: transceiver ≤3W, hand mic ≤1W).
-
Large dual-frequency LCD display (inherit from the popular KG-UV920P) with:
-
Multiple backlight color options.
-
Backlit front-panel buttons and hand mic keypad (for low-light visibility).
-
Caller ID display and channel name editing.
-
Detachable front panel (separates from the radio body) for flexible placement.
-
2 included switchboard panels: Upward-facing inclined panel | Flat panel (ideal for vehicle installation).
-
15-foot extension cable (included) allows front-panel mounting anywhere in your vehicle.
-
Includes mobile mounting bracket and remote front panel bracket for secure installation.
-
Built-in 76–108MHz FM radio.
-
1750Hz burst tone, 8 groups of scrambler, and stun/kill function.
-
Low-voltage voice prompt, reduced noise settings, and remote control (programmable for work modes/reset).
-
APO power management, automatic temperature detection, and multiple cooling fan settings.
-
Chinese/English voice guide for easy menu navigation.
|
Category
|
Details
|
|
Frequency Range
|
TX (FM): 26–29.995MHz / 50–53.995MHz / 144–148MHz / 430–440MHz
RX (FM): 26–29.995MHz / 50–54.995MHz / 65–108MHz / 108–180.995MHz / 320–349.995MHz / 400–479.995MHz / 700–987.995MHz
RX (AM): 108MHz–136MHz
|
|
Channel Step
|
5KHz / 6.25KHz / 10KHz / 12.5KHz / 25KHz / 50KHz / 100KHz
|
|
Channel Number
|
999
|
|
Work Mode
|
F2D / F3E
|
|
Operating Temp
|
-20℃~+60℃
|
|
Voltage
|
13.8VDC ±15%
|
|
Antenna Impedance
|
50Ω
|
|
Weight
|
1438g
|
|
Dimensions
|
140 × 44 × 207mm
|
|
Receiver Performance
|
Adjacent Channel Selectivity: ≤70dB (Wide) / ≤60dB (Narrow)
Inter Modulation: ≤65dB (Wide) / ≤60dB (Narrow)
Spurious Response: ≤70dB (both)
Signal to Noise Ratio: ≥45dB (Wide) / ≥40dB (Narrow)
Sensitivity (UHF/VHF): 0.25µV (12dB SINAD)
|
|
Transmitter Performance
|
Adjacent Channel Power: ≥70dB (Wide) / ≥60dB (Narrow)
Modulation Type: 16K F3E (Wide) / 11K F3E (Narrow)
Spurious: ≥60dB (both)
Signal to Noise Ratio: ≥40dB (Wide) / ≥36dB (Narrow)
|
-
Wouxun KG-UV980P radio unit
-
Wouxun MMO-003 hand microphone
-
Inclined switchboard panel + Flat switchboard panel
-
Mobile mounting bracket + Remote front panel bracket
-
15-foot front panel extension cable
-
Mobile power DC cord
-
Screw set + Microphone holder
-
2 extra fuses
-
Owner’s manual
-
1-year manufacturer warranty (Wouxun)







