Brand / Make: Audi (OEM)
Parts: Turbo inter-cooler hose/charge-air pipe + sensor (complete as pictured)
Part numbers on items:
Charge pipe / hose: 4G0 145 709 AE
Mated hose/adaptor (with sensor port): 4G0 145 673 AH
Donor vehicle: 2016 Audi A6 3.0 TDI V6 – low mileage
Platform note: PN prefix 4G0 = A6/A7 “C7” platform (2011–2018)
Condition: Used — cleaned & pressure-checked for obvious leaks; normal handling marks
Included: Pipe/hose + fitted sensor/port exactly as shown (clips/couplers only if pictured)
Not included: Extra clamps, seals, or additional pipes not shown
Warranty: 3 months parts-only — security-marked
System: Charge-air / inter-cooler tract
Typical location: Front lower engine bay, routing between inter-cooler and intake/turbo plumbing.
Match keyed ends/clip style/clocking to your original hose to confirm side/orientation.
Designed for C7 longitudinal 3.0 TDI V6 when the full part numbers match:
Audi
A6 C7 (4G2 Saloon / 4G5 Avant) — ~2011–2018 3.0 TDI V6 (selected outputs/PR-codes)
A6 allroad (4GH) — selected 3.0 TDI trims listing 4G0 145 709 AE / 4G0 145 673 AH
A7 Sportback (4G8) — selected 3.0 TDI V6 models using the same hose/pipe numbers
Important: Charge pipes vary by engine output (e.g., 204/245/272 PS), emissions package, RHD/LHD, and routing revisions. For a guaranteed fit, match the complete numbers (…709 AE / …673 AH) on your original parts or confirm by VIN. Do not assume interchange with similar suffixes (…AD, …AF, …AJ, etc.).
Genuine Audi 3.0 TDI charge-air hose/pipe with sensor removed from a low-mile 2016 A6. Ideal fix for split hoses, oil-softened ends, boost leaks, or whistle/limp-mode faults traced to this section of the inter-cooler tract. Supplied exactly as shown and backed by a 3-month parts-only warranty.
Fit with new O-rings/seals; ensure clips/couplers are fully seated and torqued evenly.
Clean mating surfaces and inspect adjacent pipes for cracks/wear.
After install, perform a boost-leak check and clear any related DTCs.
Q: Will this fit my 2015 A7 3.0 TDI?
A: Yes if your original labels or VIN lookup show 4G0 145 709 AE and 4G0 145 673 AH. Different suffix = different routing/spec.
Q: Is this for C6 or C7?
A: C7 — the 4G0 prefix denotes A6/A7 C7 platform (2011–2018).
Q: Are clamps included?
A: Only what’s pictured. We recommend new clamps/O-rings during installation.
If you require any further information please message us or contact us on our number listed below in the Business Information.
And we would like to Thank You for taking the time to view our listing.