|
|
|
|
|
|
|
|
|
|
|
Product Introduction
* Fits either LH (Driver Side) or RH (Passenger Side) Front And Rear
* Fits 5 Lugs Wheels
* Wheel studs already installed
* Front ABS Type:NON-ABS
* Rear ABS Type: Sensor Cap
Features
* Brand New Wheel Hub Assembly
* Made for quick and easy installation
* 100% factory tested
* Manufactured in accordance with strict quality control standards
Fits
- Fits Ponitac Vibe 2009-2010 FWD | 1.8L 4Cyl
- Fits Toyota Corolla 2009-2019 (2019 Sedan Only)
- Fits Toyota Matrix 2009-2013 FWD | 1.8L Base
Package Include
- (2) Front Wheel Bearings - 510070
- (2) Rear Wheel Hub Bearings - 512403
Removal
1.Remove the bolt and separate the front wheel sensor from the steering knuckle.
2.Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
3.Put alignment marks on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
4.Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
5.Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
6.Remove the engine side cover.
7.Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
8.Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
9.Remove the wheel hub and bearing bolts using power tool.
10.Remove the splash guard and the wheel hub and bearing from the steering knuckle.
Note
Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
Pull out the front wheel sensor, being careful to turn it as little as possible;
Do not pull on wheel sensorharness.
Installation is in the reverse order of the removal
| Item Specifics | |
|---|---|
| Brand | 1autopowerstore |
| Manufacturer Part Number | 11963953 |
| Type | Wheel Hub & Bearing Assembly |
| Manufacturer Warranty | 1 Year |
| Placement on Vehicle | Front, Rear, Left, Right |
| Fitment type | Direct replacement |
| Outside Diameter | 2.91 In. |
| Material | Steel |
| Interchange Part Number | 510070 |
| OE/OEM Part Number | 512403 |
| Superseded Part Number | 510070, 512403 |
| Quantity | 4 |
| Inside Diameter | 1.57 In. |
| Flange Bolt Hole Quantity | 4 |
| Bolt Pattern | 5 x 100 mm |
| Bolt Circle Diameter | 3.94 in. / 100 mm |
| Brake Pilot Diameter | 2.17 in. / 55 mm |
| Hub Pilot Diameter | 2.91 in. / 74 mm |
| Flange Diameter | 5.31 in. / 135 mm |
| Flange Offset | 2.36 in. / 60 mm |
| Flange Bolts Included | No |
| Wheel Lug Quantity | 5 |
| Wheel Stud Size | M12x1.5 |
| Finish | Polished, Rust Protected |
| Anti-lock Braking System | Yes |
| Bearing Type | Ball Bearing |
| Bearing Generation | G2/ G3 |
| Flange Shape | Modified |
We maintain high standards of excellence (five stars review) and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US.
We request that you contact us immediately if you don't satisfied with our item or service, do not leave feedback before we solve your problem, so that we can satisfactorily address your concerns.
Do Check the compatibilities before placing order, or if you have any question in compatible chart, contact us first.
Any question, please feel free to contact us.
If there's any problem with your order, do contact us please.
Shop Category Hot Item
Excellent Delivery
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us New List Item
|
4X Wheel Hub Bearings Front Rear For 2009-2019 Toyota Corolla Pontiac Vibe 1.8L
Product Introduction * Fits either LH (Driver Side) or RH (Passenger Side) Front And Rear * Front ABS Type:NON-ABS * Rear ABS Type: Sensor Cap
* Brand New Wheel Hub Assembly * Made for quick and easy installation
Fits
Removal
Note Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
Installation is in the reverse order of the removal
Payment
We accept any payment which can be accepted be ebay.
We only ship to verified order addresses. Please make sure your address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address! Shipping
1. Orders processed within 48 hours of payment verification.
2. We only ship to confirmed Order addresses.
3. If you have not received your shipment within 10 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Returns & Refunds
1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer if the reason is "order by mistake" or "don't want it".
Feedback
We maintain high standards of excellence (five stars review) and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately if you don't satisfied with our item or service, do not leave feedback before we solve your problem, so that we can satisfactorily address your concerns. Contact Us
Do Check the compatibilities before placing order, or if you have any question in compatible chart, contact us first. Any question, please feel free to contact us. If there's any problem with your order, do contact us please. All rights reserved. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
