◆About this product
This kit is a modification toolset designed to help users add a monopod to the PRS LITE. Installation of this kit requires drilling. You will need to prepare your own drill. Drilling holes in the PRS LITE body is necessary for installation. If you do not wish to drill into the body, please do not proceed with installation. Additionally, to insert the Threaded Insert inside the PRS LITE, disassembly of the PRS LITE is required. Depending on product variations or specification changes, additional modification may be necessary.
◆How to install
STEP 1.
Place the "Drill Guide" firmly against the front end of the bottom surface of the PRS LITE.
STEP 2.
While holding it securely in place, drill two holes into the bottom of the PRS LITE through the holes in the "Drill Guide." Be careful not to drill too deep.
STEP 3.
Remove the six screws of the PRS LITE using a 1/8" hex wrench and disassemble the stock. Be careful not to let the internal parts fall out during disassembly.
STEP 4.
Place the "Drill Guide" firmly against the front end of the bottom surface of the PRS LITE.
STEP 5.
Finally, attach the "Rail Adapter" and secure it with the included screws to complete the installation. Please attach your preferred monopod to the rail.
Tip: It is recommended to use a medium-strength threadlocker (e.g., LOCTITE 243) to prevent the screws from loosening.
◆Specifications
Injection-molded, fiber-reinforced nylon
◆What's included
1x Threaded Insert
2x Insert Nuts
1x Rail Adapter
1x Drill Guide
1x 5.1mm Drill Bit
2x Screws
1x Hex Key Wrench
◆Note
This kit does not include the PRS LITE or monopod. The manufacturer accepts no responsibility for any damage or injury resulting from the use of this product. This product is professionally injection molded using high-quality materials for a durable, consistent finish — not 3D printed.