 
AUTOOL AST605 Automotive Brake Fluid Bleeder is a brake fluid exchanger equipment. The physical principle is to suck the brake fluid from the new fluid storage tank through a pump, and continuously pump it into the automobile brake fluid container at a specified pressure. Compared with the traditional compressing way to exchange brake fluid, this pulsating brake fluid exchanger can effectively avoid the generation of air bubbles during the filling process, thereby optimizing or avoiding the artificial exhaust process.
 AUTOOL always selects long-lasting and durable product materials, adheres to the production process of excellence, and upholds the spirit of revolution and innovation, committing to creating products with innovative and superior quality for users. Why Choose AUTOOL?
|
  |
 |  |  |
Adjustable Pressure The pressure can be adjusted via the button on the Smart Panel (pressure range: 0.7-3.0 BAR). You can also intuitively read the pressure value of the liquid change via the pressure gauge. | Save Time and Costs Compared to traditional manual tools, this machine requires only one operator to complete the brake fluid replacement process. It handles tedious tasks such as draining the lines, injecting new brake fluid, and subsequent fluid return, thereby saving you labor and time costs. | Corrosion Resistant Recycle BottleAUTOOL AST605 has a powerful recovery function that can quickly recover used brake fluid at the same time. It only takes one person to operate, making it easy for you to use and change your brake fluid |
 |  |  |
| Corrosion Resistant Recycle Bottle The recycling bottle can be placed in the fuselage for easy carrying, and the volume of the recovery bottle is 1.5 liters, and the brake fluid of the complete car can be replaced | Package Includes1* AST605 Brake Fluid Bleeder Main Unit 3* Adapters(1#, 6#, 16#) 1* Fluid Recycling Bottle 1* Filling Hose 1* Power Cord 1* User Manual | Widely applicable AUTOOL AST605 is suitable for automotive brake fluid tanks in Europe, the United States and Asia, and can be applied to almost all vehicles, supporting Dot3, Dot4, Dot5.1 brake fluid standards |
    | ||
| The Preparation of Equipment Exhausting Note: To prevent air from mixing into the vehicle through the equipment line during the brake fluid exchange, which could lead to failure. It is necessary to fill the line with brake fluid to evacuate the air during the first time using. | ||
Directions: Step 1: The first step is to bleed the device. Please note that the oil reservoir on the vehicle must be filled to the maximum level. Step 2: Find a suitable adapter and connect it to the vehicle. Step 3: Press and hold the start button for 5–6 seconds to build up pressure. Once the pressure reaches above 0.6 bar, release the button. Step 4: Adjust the pressure, usually to 2 bar. Step 5: After turning on the machine and adjusting the pressure, loosen the screw on the wheel cylinder/brake caliper. Step 6: How to tell if the old oil has been drained? Check the layering and color of the fluid in the waste oil bottle. The darker layer is the old oil. Step 7: After the replacement is completed, it is important to tighten the screws of the cylinder before shutting down the machine, as the wrong sequence will cause air to enter the braking system.  |
 |  |  |  |  |  |
 |  |  |  |
 |  |  |  |
 |  |  |  |
 |  |  |  |
