• Fits:
  •  
  • 1992-1996 TOYOTA CAMRY 2.2L
  •  
  • Package Include:
  •  
  • 1Pcs Brake Calipers 
  •  
  •  
  • Steps to replace a brake Caliper:
  •  
  • If you are comfortable with car repairs and have the necessary tools, you can replace the brake caliper yourself. The process might vary slightly for different makes and models. Here are the general steps to replace a brake caliper. 
  •  
  • 1. Lift the vehicle  Use the lug wrench to loosen the lug nuts on the tire and then use the jack to lift the vehicle off the ground. Secure the vehicle with jack stands.

    • Single Brake Calipers Fits 1992-1996 TOYOTA CAMRY 2.2L w/ Bracket Front Left

    Fits:

     

    1992-1996 TOYOTA CAMRY 2.2L

     

    Package Include:

     

    1Pcs Brake Calipers 

     

     

    Steps to replace a brake Caliper:

     

    If you are comfortable with car repairs and have the necessary tools, you can replace the brake caliper yourself. The process might vary slightly for different makes and models. Here are the general steps to replace a brake caliper. 

     

    1. Lift the vehicle
    Use the lug wrench to loosen the lug nuts on the tire and then use the jack to lift the vehicle off the ground. Secure the vehicle with jack stands.


    2. Remove the tire
    Use the lug wrench to remove the lug nuts and then remove the tire from the vehicle.


    3. Remove the caliper mounting bolts
    Use the brake caliper tool to remove the caliper mounting bolts that hold the caliper in place.


    4. Remove the caliper
    Once the mounting bolts are removed, gently pry the caliper off the brake rotor. Be careful not to damage the brake hose as you remove the caliper.


    5. Install the new caliper
    Place the new caliper over the brake rotor and secure it in place with the caliper mounting bolts. Torque the bolts to the manufacturer’s recommended specifications using a torque wrench.


    6. Install the tire
    Replace the tire and lug nuts, torque to spec, and then lower the vehicle off the jack stands.


    7. Bleed the brake system
    Use a brake bleeding kit to remove any air from the brake system. This is an important step to ensure that the brakes are working properly. Continually top up the fluid in the reservoir as you bleed the brakes.


    8. Test the brakes
    Once the brake caliper is installed and the brake system has been bled, test the brakes to ensure they are functioning properly.

     

     

    Construction of Brake Calipers:

     

    • Caliper Housing: The caliper's main body houses the other components and encloses the brake pads and rotor.
       
    • Pistons: These are cylindrical components located inside the caliper housing. When hydraulic pressure is applied, the pistons extend outward to push the brake pads against the rotor.
       
    • Seals and Dust Boots: These ensure a tight and reliable seal around the pistons, protecting them from dirt and contaminants. Proper seals are vital to prevent brake fluid leaks and maintain hydraulic pressure.
       
    • Brake Pad Clips: These clips securely hold the brake pads within the caliper.
       
    • Bleeder Screw: A small screw used to release air and excess brake fluid from the caliper during brake bleeding procedures.

     

    Different Types of Brake Calipers:

     

    • Floating Calipers: Floating calipers are the most common type used in modern vehicles. They have one or two pistons on one side of the rotor. When the brakes are applied, the caliper slides inward, causing the piston(s) to press the brake pads against the rotor. Floating calipers are relatively simple and cost-effective, widely used in various vehicles.
       
    • Fixed Calipers: Fixed calipers have pistons on both sides of the rotor, providing more even pressure distribution and improved braking performance. Unlike floating calipers, fixed calipers do not slide; they remain stationary during braking. This design reduces caliper flexing and ensures a more consistent brake pad-to-rotor contact.
       
    • Sliding Calipers: Sliding calipers are also known as pin-slide calipers. They have one or two pistons on one side of the rotor, similar to floating calipers. However, sliding calipers use pins or sliders to allow the caliper to move back and forth slightly during braking. This design helps equalize pressure on both sides of the rotor and promotes even brake pad wear.

     


    Item Specifics
    Brand topoint-autoparts
    Manufacturer Part Number TO181463P01INT
    Placement on Vehicle Left,Front
    Manufacturer Warranty 1 Year
    Custom Bundle No
    Fitment Type Direct Replacement
    Mounting Hardware Included Yes
    Listing Include One Piece Brake Caliper
    Features Positive Mold Technology
    Copper Washers Included Yes
    Mounting Hardware Yes
    Brake Bracket Included Yes
    Grade Description Premium
    Finish Zinc Plated
    OE/OEM Part Number 19B1569 Brake Calipers replacement
    Bleeder Port Size M7*1.0
    Inlet Port Size M10*1.0
    Piston Material Iron
    Type Brake Calipers & Bracket
    Banjo Bolt Included Yes
    Material High Quality Cast Iron
    Brake Piston Count 1
    Piston Size(mm) 57

    Payment

    1.We accept multiple payment methods
    2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    3.Payment must be received within 10 days as auction ended or order might be delayed.

    Shipping

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
    3. The images shown are not the actual item and are for your reference only.
    4. Fast shipping:All our packages use USPS First Class Package Service
    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1.We stand behind every product we sell.
    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    2.Please contact us by eBay email first before you return the item.

    Feedback

    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    2. It is impossible to address issues if we do not know about them!

    Warranty

    1. 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
    2. Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. we do not repair or replace items with an expired warranty.
    You agree to all of the above-listed policies upon bidding on and winning this auction!

    Shop Category
     Store Home
     Window Switch
     window regulator
     Ignition Coil
     Headlight Assembly
     Turbocharger
     CV Axle Assembly
     CV Axle
     Transfer Case Motor
     Throttle Body
     Fuel Pump
     Spark Plugs
     ATV Rear Wheel Axle
     Shocks Struts Assembly
     Clock Spring
     Bare Shocks & Struts
     Air Suspension Shock Strut
     Bumper
     Coilovers Struts Suspension
     Door Handle
     Brake System Parts
     Air Suspension Valve Solenoid
     Horn
     Power Brake Booster
     Quick Strut+Suspension Kit+Hub
     Dipstick
     Ballast Module
     Cylinder Piston Kit
     Strut Mount
     Air dryer
     Mud Flaps
     Air Intake Snorkel
     Adjustable Control Camber Arm
     Lift Support
     Mass Air Flow Sensor
     Coil Spring
     Protection Shield & Lift Kit
     Removal Tool
     Shackle & other
     Steering Knuckle
     Shift Knob Lever Head
     Dump Truck Tarp Motor
     Window Weatherstrip
     Rocker Panel
     Other
    Hot Item
    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Single Brake Calipers Fits 1992-1996 TOYOTA CAMRY 2.2L w/ Bracket Front Left

    Fits:

     

    1992-1996 TOYOTA CAMRY 2.2L

     

    Package Include:

     

    1Pcs Brake Calipers 

     

     

    Steps to replace a brake Caliper:

     

    If you are comfortable with car repairs and have the necessary tools, you can replace the brake caliper yourself. The process might vary slightly for different makes and models. Here are the general steps to replace a brake caliper. 

     

    1. Lift the vehicle
    Use the lug wrench to loosen the lug nuts on the tire and then use the jack to lift the vehicle off the ground. Secure the vehicle with jack stands.


    2. Remove the tire
    Use the lug wrench to remove the lug nuts and then remove the tire from the vehicle.


    3. Remove the caliper mounting bolts
    Use the brake caliper tool to remove the caliper mounting bolts that hold the caliper in place.


    4. Remove the caliper
    Once the mounting bolts are removed, gently pry the caliper off the brake rotor. Be careful not to damage the brake hose as you remove the caliper.


    5. Install the new caliper
    Place the new caliper over the brake rotor and secure it in place with the caliper mounting bolts. Torque the bolts to the manufacturer’s recommended specifications using a torque wrench.


    6. Install the tire
    Replace the tire and lug nuts, torque to spec, and then lower the vehicle off the jack stands.


    7. Bleed the brake system
    Use a brake bleeding kit to remove any air from the brake system. This is an important step to ensure that the brakes are working properly. Continually top up the fluid in the reservoir as you bleed the brakes.


    8. Test the brakes
    Once the brake caliper is installed and the brake system has been bled, test the brakes to ensure they are functioning properly.

     

     

    Construction of Brake Calipers:

     

    • Caliper Housing: The caliper's main body houses the other components and encloses the brake pads and rotor.
       
    • Pistons: These are cylindrical components located inside the caliper housing. When hydraulic pressure is applied, the pistons extend outward to push the brake pads against the rotor.
       
    • Seals and Dust Boots: These ensure a tight and reliable seal around the pistons, protecting them from dirt and contaminants. Proper seals are vital to prevent brake fluid leaks and maintain hydraulic pressure.
       
    • Brake Pad Clips: These clips securely hold the brake pads within the caliper.
       
    • Bleeder Screw: A small screw used to release air and excess brake fluid from the caliper during brake bleeding procedures.

     

    Different Types of Brake Calipers:

     

    • Floating Calipers: Floating calipers are the most common type used in modern vehicles. They have one or two pistons on one side of the rotor. When the brakes are applied, the caliper slides inward, causing the piston(s) to press the brake pads against the rotor. Floating calipers are relatively simple and cost-effective, widely used in various vehicles.
       
    • Fixed Calipers: Fixed calipers have pistons on both sides of the rotor, providing more even pressure distribution and improved braking performance. Unlike floating calipers, fixed calipers do not slide; they remain stationary during braking. This design reduces caliper flexing and ensures a more consistent brake pad-to-rotor contact.
       
    • Sliding Calipers: Sliding calipers are also known as pin-slide calipers. They have one or two pistons on one side of the rotor, similar to floating calipers. However, sliding calipers use pins or sliders to allow the caliper to move back and forth slightly during braking. This design helps equalize pressure on both sides of the rotor and promotes even brake pad wear.

     

    Item Specifics
    Brand :topoint-autoparts
    Manufacturer Part Number :TO181463P01INT
    Placement on Vehicle :Left,Front
    Manufacturer Warranty :1 Year
    Custom Bundle :No
    Fitment Type :Direct Replacement
    Mounting Hardware Included :Yes
    Listing Include :One Piece Brake Caliper
    Features :Positive Mold Technology
    Copper Washers Included :Yes
    Mounting Hardware :Yes
    Brake Bracket Included :Yes
    Grade Description :Premium
    Finish :Zinc Plated
    OE/OEM Part Number :19B1569 Brake Calipers replacement
    Bleeder Port Size :M7*1.0
    Inlet Port Size :M10*1.0
    Piston Material :Iron
    Type :Brake Calipers & Bracket
    Banjo Bolt Included :Yes
    Material :High Quality Cast Iron
    Brake Piston Count :1
    Piston Size(mm) :57


    1.We accept multiple payment methods
    2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    3.Payment must be received within 10 days as auction ended or order might be delayed.

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
    3. The images shown are not the actual item and are for your reference only.
    4. Fast shipping:All our packages use USPS First Class Package Service
    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1.We stand behind every product we sell.
    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    2.Please contact us by eBay email first before you return the item.

    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    2. It is impossible to address issues if we do not know about them!

    1. 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
    2. Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. we do not repair or replace items with an expired warranty.
    You agree to all of the above-listed policies upon bidding on and winning this auction!


    topoint-autoparts_All rights reserved.